How to Plane a Door

Over time, the doors in your home may begin to stick and bind. Sometimes simply tightening the hinge screws will solve the problem, but occasionally it is necessary to resize the door. One of the best ways to resize a wood door is to plane the door edges to relieve the binding. In order to plane a door, you will need to identify the area that needs to be planed, prepare the door properly, remove wood gradually, and check your work as you go. With a bit of care and the right technique, you can make your door work smoothly again.

Part 1
Part 1 of 3:

Locating the Problem Areas on a Door

PDF download Download Article
  1. In some cases, you can easily find the area that needs planing because the sticking has rubbed the surface of the paint on the jamb and the door. Areas along the edge where the paint is discolored or gone are the areas that you need to plane. [1]
    • If the discoloration is subtle, use a pencil and draw a circle around the area. This will help you find it when you are using the plane.
  2. If you don't know exactly where your door is rubbing, look at the gap between the jamb and the door when it is closed. The gaps will be smallest in the area where the door is rubbing.
    • Once you have identified this area, you can look closer for additional signs of rubbing.
    Advertisement
  3. Do this repeatedly while looking for the point where the door first makes contact with the jamb. You should be able to find the spots that rub by looking at where the door makes contact when the door catches.
    • If the door doesn't close all the way, close it as much as you can and then push all around the door to see which areas feel loose and could close further and which feel tight. The tight areas are where the door is catching.

    Tip: For best results, test and mark the door for sticking on a humid day so that you are checking when the door's wood is most swollen.

  4. Once you think you know where the door is rubbing, put pencil marks all over that area. Then open and close the door several times. If the marks are transferred to the jamb, this is an area of contact that needs to be planed down. [2]
    5. Advertisement
Part 2
Part 2 of 3:

Preparing the Door For Planing

PDF download Download Article
  1. Once you have identified where to plane, it's important to make marks there so you can find them once the door is in your work area. Use a pencil to shade the area that you want to plane down. [3]
    • Covering the entire area that you want to plane with marks will allow you to keep track of what you have and have not planed while you are doing it.
    • Mark spots with a pencil on both the front and back of the door to help you maintain the door's symmetry as you plane.
  2. You can take the door off by removing the pin in the hinge, if your door has a removable one, or by unscrewing the hinge from the door. To take out the pin, use a pair of pliers and pull the pin straight up on the bottom hinge and then the upper hinge. If you choose to unscrew the hinges, take the hinges off of the door face, keeping the hinges attached to the door frame. [4]
    • Whichever way you do it, get a helper to hold the door while you undo it. They can help hold the door steady to avoid binding the pin, damaging the hinges, or stripping the screw holes in the door.
    • Tape the screws to the hinges to avoid misplacing them.
    • Place the pins in the half of the hinge that is still on the door jamb so you don't misplace them.

    Tip: If you only need to remove a tiny amount of wood on the top or lock side of the door, you can plane it while it is secured to the frame. However, in most cases it will be easier to plane and repaint the door after it has been taken down.

  3. You need a strong surface to work on so that you can exert force on the door as you plane. You can put the door on sawhorses or a worktable. Once it is stable, secure it with clamps or straps so that it doesn't move when you plane. [5]
    • When positioning your door, take the area you are going to plane into consideration. Put the area that will be planed in a spot that will be easy for you to access.

    Tip: If you are having a hard time securing the door well enough to the work surface so that it can't move, ask someone to help you hold it while you plane.

  4. Apply painter's tape to both sides of the door around the whole area you are going to plane. Masking this area will protect the paint or finish from getting dinged by your plane and it will lessen the risk of chipping as you remove layers of wood.
    • Use painter's tape because it comes off easily and will not remove the finish on the door the way that other types of tape can.
    5. Advertisement
Part 3
Part 3 of 3:

Planing Down the Door

PDF download Download Article
  1. A plane is a tool that requires muscle power to run a small blade over wood too smooth it out. All planes have a smooth bottom surface that runs along the wood. At one end of the surface is a thin open slot where the blade is inserted. On the top of the tool are the handles, which are used to push the plane across the wood. There are several types of planes that will work well for planing a door. The most common is called a bench plane. It is held with both hands and is great for smoothing out areas on the edges of doors. There is also a small form of plane that is called a block plane, which is held with one hand and works well for removing small areas on a door. [6]
    • There are also a wide variety of specialty planes that will work for planing a door.
    • In general, if you have a plane already, it will likely work well enough to plane small areas on a door.
  2. You want to take off very thin layers of wood as you plane so that the material is removed gradually and evenly. To ensure this, the blade of the plane should be adjusted to just barely peek out from the bottom of the plane. This is done by adjusting the wheel below the handle of the plane.
    • To check that your plane is removing the right amount of wood, run it down a scrap piece of wood. If the plane easily removes the wood as you push, it should work well on your door. [7]
  3. Use smooth, light strokes as you run the plane across the wood. Hold the plane with both hands, or with a single hand if you are using a small block plane. Plane the edges of the door by working your way from the outside edge toward the center. Don't press hard and focus on removing only small amounts at a time.
    • Focus on keeping the bottom surface of the plane flat on the wood as you move the plane. Rocking it or having it raised up on one side will give you uneven cuts.
  4. Plane the hinge or lock sides of the door in the same direction as the wood grain, applying light pressure to remove very small amounts of wood at a time. Running the plane in this direction will create smooth cuts instead of chunky, bumpy cuts. [8]
    • On many doors the grain runs from top to bottom, instead of side to side. This means that the plane should be run in this direction as well.
  5. To avoid taking off too much wood, check the fit frequently by putting the door back in the jamb. Open and close the door to see if the door is still sticking. If its still sticking, take the door off and continue planing. If it isn't, you will still need to take the door off to refinish the surface you planed.
    • In most cases, the difference between planing off enough wood and too much is small.

    Tip: While it is inconvenient to repeatedly remove and re-hang the door, doing so reduces the likelihood of removing too much and having to completely replace the door.

  6. Once the door has been planed down enough, you should focus on making the surface look smooth again. Run a rough sandpaper across it to remove any large grooves that were created by the planer. Then run a fine sandpaper over it to create a smooth surface. [9]
    • When sanding, try to take as little wood off the door as possible. You have made your adjustments to it with the plane and the sanding is just to make the door surface look smooth finished.
  7. Apply primer and paint to the exposed surface if the entire door is painted. If the door was stained, use stain on the planed area and try to blend it into the existing stain. [10]
    • If you have the paint used for the door originally, use that for your planed area. If you don't have it, try to match it the best you can or use a whole new color to paint the entire door.
    • Once the stain is dry, be sure to apply wood sealer to the planed area to protect the stain and to give it a nice finish.
  8. Once you have planed down enough of the wood, simply reattach the door to the hinges. Check that the door works and doesn't rub once it is reattached. [11]
    • Make sure to tighten the hinge screws properly to prevent sagging.
    9. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can a hollow core interior door be cut at the bottom so that I can put new vinyl over existing vinyl? How much can be cut at the bottom?
    Community Answer
    20mm.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 85
  • Question
    How do I hold a door to plane the sides?
    Community Answer
    You can either buy a door stand (e.g. Trend Adjustable Door Stand) or create your own jig using off-cut timber.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 13
  • Question
    I have a non-wood door that needs to be planed for my new flooring to fit. How would I do that?
    Ashton Gilmore
    Community Answer
    It greatly depends on the type of door. If it is a metal or fiberglass, I'm afraid you are out of luck. Some types may be able to be sanded down. However, never use a plane on anything except wood.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 5
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Before planing the doors, make sure there is not a quicker fix. Try tightening the hinges to level out the door, putting shims under the hinge to level the door, or sanding excess paint on the door and the jamb.
        Thanks
        Helpful 0 Not Helpful 0
      • To remove sections larger than 3.8 inches (9.7 cm), start by cutting down the door with a circular saw, then follow with a plane.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Use protective eye wear, such as goggles, while planing to protect your eyes from wood splinters and sawdust.
        Thanks
        Helpful 1 Not Helpful 0
      Advertisement

      Things You'll Need

      • Pencil
      • Screwdriver
      • Work bench or sawhorses
      • Clamps or straps
      • Painter's tape
      • Hand plane
      • Sandpaper
      • Sealer/paint

      You Might Also Like

      5 Ways to Fix a Broken Door Frame
      How to
      Adjust Door Hinges
      How to
      Fix and Repair a Damaged Hollow Core Door
      How to
      Fix a Rubbing Door
      How to
      Remove a Door Hinge Pin
      How to
      Seal a Door
      How to
      Lubricate Door Hinges
      How to
      Fix a Stripped Screw Hole in a Door Hinge
      How to
      Stop Squeaky Door Hinges
      Simple Ways to Adjust Self-Closing Spring Hinges
      Adjusting French Doors: Your Top Problems Solved
      How to
      Level a Door
      5 Ways to Fix a Jammed Door & Stop It From Sticking
      How to
      Repair a Door Chime
      Advertisement

      References

      1. ↑ https://www.popularmechanics.com/home/interior-projects/how-to/a162/1275846/
      2. ↑ https://www.bobvila.com/articles/how-to-plane-a-door/
      3. ↑ https://www.popularmechanics.com/home/interior-projects/how-to/a162/1275846/
      4. ↑ https://www.popularmechanics.com/home/interior-projects/how-to/a162/1275846/
      5. ↑ https://www.bobvila.com/articles/how-to-plane-a-door/
      6. ↑ https://www.wonkeedonkeetools.co.uk/woodworking-hand-planes/what-are-the-different-types-of-woodworking-hand-plane/
      7. ↑ https://www.bobvila.com/articles/2088-making-plane-adjustments/
      8. ↑ https://www.bobvila.com/articles/how-to-plane-a-door/
      9. ↑ https://www.bobvila.com/articles/how-to-plane-a-door/
      1. ↑ https://www.bobvila.com/articles/how-to-plane-a-door/
      2. ↑ https://www.bobvila.com/articles/how-to-plane-a-door/

      About This Article

      Article Summary X

      To plane a bedroom door, use a pencil to mark the areas that need to be planed on both the front and back of the door, remove it from the frame, and secure it on a stable surface. Next, adjust your plane to the correct angle so that it can take off very thin layers of wood gradually and evenly. Then, run the plane across the wood in the direction of the wood grain using smooth, light strokes. Finally, sand and paint or stain your door before reattaching it to the frame. For more tips on using the proper planing technique, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 308,781 times.

      Reader Success Stories

      • Brittany Rose

        Jul 15, 2017

        "Didn't know how to fix my bedroom door. Didn't know how to hang a magic mesh door. wikiHow taught me ..." more
        Rated this article:
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement