How to Point a Wall

PDF download Download Article
Step-by-step instructions to properly point a wall with mortar
PDF download Download Article

Pointing a brick wall is the process of applying mortar in the cracks between individual bricks. Pointing is a necessary and important part of finishing construction on a brick wall. The mortar that you point between bricks will protect the wall from snow, rain, and other elements, and make the gaps watertight. To point the wall, you’ll need to make a batch of mortar, and use a trowel and pointing tool to apply it to gaps in the joints between bricks. Then, press the mortar into shape and let it dry, and you’ll have your wall pointed in no time!

Part 1
Part 1 of 3:

Making the Mortar

PDF download Download Article
  1. Many types of mortar are available for purchase, but lime mortar is ideal for pointing walls. Lime mortar should be available for purchase at a local hardware store or gardening center. Landscaping-supply businesses will also likely sell lime mortar. [1]
    • It’s difficult to estimate how much lime mortar you’ll need to point your wall. It depends on how badly your wall is in need of repair, and whether you’ll be pointing 1, 10, or 100 cracks.
    • That said, if you’re pointing a relatively small wall that’s 3.3 feet (1 m) high by 6.6 feet (2 m) (2 m) wide, you’ll need about 40 lb (18 kg) of lime mortar.
    • A 60-pound (27-kg) bag of lime mortar will usually cost around $5–$10 at your local hardware or home-supply store. You’ll likely need to buy your own sand too, although this should be inexpensive.
    • Bring a sample of the existing mortar to the store with you so you can get an exact color match. [2]
  2. The amount of mortar you pour out depends on how many joints you’ll need to point. As a general rule of thumb, prepare enough mortar to last you 30 minutes. If you make an hour’s worth of mortar, it may dry out before you’ve had time to use it. [3] Start small: try only using about 1 cup (240 mL) of mortar to begin with.
    • Either a bucket or wheelbarrow will give you plenty of space to mix the mortar in. If you need to make a large amount of mortar—or are mixing far from the wall you’ll be pointing—opt for the wheelbarrow.
    Advertisement
  3. Sand will give the mortar a gritty consistency and help it have stronger cohesion. While there’s some flexibility in the amount of sand you use relative to the amount of mortar, a 3:1 ratio is generally best for brick walls. [4] So, if you’ve poured out one small bucket-full of mortar, add three small buckets-full of sand.
    • You can purchase sand at a local hardware store.
  4. Pour in about ½ a bucket of water. Then, use your trowel to mix the mortar, sand, and water all together. When mortar is the right consistency, it should be firm enough to hold its shape. The mortar should not slump or flow like a liquid. [5]
    • Add only a small amount of water at first. It’s easy to pour more water into dry mortar, but if you add too much water all at once, you’ll have to pour in much more mortar and sand to absorb all the extra water. [6]
    • If you're mixing the mortar in a wheelbarrow, mix the mortar using a front to back motion.
    • To speed up the mixing process, use a mixing paddle attached to a drill to stir the mortar.
    • Make sure you wear safety glasses, a mask with ventilation, gloves, and long pants when you're working with mortar. [7]
    5. Advertisement
Part 2
Part 2 of 3:

Applying the Lime Mortar

PDF download Download Article
  1. If you’re pointing a wall, you should already have constructed a sturdy wall using mortar between all of the bricks. However, there may be small gaps or cracks where the mortar has fallen out from the joints between the bricks. Run your eyes over the entire wall to find these cracks. [8]
    • Check for these gaps in both the bed joints (horizontal) and cross joints (vertical).
  2. Once you find a crack, scoop up about ¼ cup (4 ounces) of mortar on your trowel. Use a pointing tool or other narrow trowel to scrape the mortar into the gap in the joint. Press the mortar firmly in place, so that it will not fall back out of the gap. [9]
    • You’ll be able to purchase a variety of trowel sizes at any local hardware store or gardening center.
    • You can also wear gloves and press the mortar into the cracks using your thumbs.
  3. The mortar you’ve just scraped into the brick joints needs to be partially dry before you start pointing. If you point the mortar prematurely, you won’t be able to correctly shape the mortar. [10] Wait about 20 or 30 minutes. [11]
    • After about 20 minutes, test the mortar to see if it’s hardened sufficiently. Press your thumb firmly into the mortar you’ve added to a joint. Your thumb should leave a dent in the mortar, but it should not displace any gooey, wet mortar.
    4. Advertisement
Part 3
Part 3 of 3:

Shaping the Joint

PDF download Download Article
  1. Once the mortar is sufficiently dry, push your narrow pointing trowel firmly into the mortar that you’ve just applied. If you don’t have a pointing trowel, or would prefer for the finished mortar to have a concave curve to it, you can use a 6-inch (15-cm) section of rubber hose instead. [12]
    • If you don’t have either a pointing tool or a length of rubber hose, you can even use a bucket handle to point the mortar in a joint.
  2. Keep applying pressure as you slide your trowel or rubber hose along the mortar in the joints. This will compact the mortar (making it more weather resistant) and give it a concave shape. If you’ve added mortar to both vertical and horizontal joints, be sure to point the cross joints first and the bed joints second. [13]
    • The outer surface of the joint should be indented from the surface of the bricks. You don’t want the mortar from the joint to protrude out past the brick face. [14]
  3. If your wall is in an exposed area where it will receive a lot of wind, rain, or snow, you can use a weather struck joint. To make a weather struck bed joint, press your pointing trowel at an angle, so that the top edge is indented into the mortar and the lower edge is away from the wall. Then run the trowel along the mortar and press the joint into shape. [15]
    • A weather struck joint will protect your brick wall from absorbing water. The angle of the joint will deflect moisture and force rainwater to run down the surface of the bricks, rather than soaking into the mortar.
    • Weather struck joints are only used on bed joints. There is no corresponding pointing angle for vertical joints.
    • For a professional finish, smooth out the joint and surrounding area with a medium-soft mason brush when it's about halfway dry.
    • Wait for the mortar to fully dry after this step. Give it at least another 30 minutes.
  4. Once the mortar has dried, you’re ready for the final step. To finish the pointing process, take your wire brush and rub it over the entire area you’ve pointed. This will remove any excess mortar that may have gotten onto the bricks, and will even out the texture of the mortar in the joint. [16]
    • Be careful when you're using the wire brush. If there's moisture still in the mortar, the wire brush may pull the mortar out.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I fix mortar that's cracked or eroded?
    Gerber Ortiz-Vega
    Masonry Specialist & Founder, GO Masonry LLC
    Gerber Ortiz-Vega is a Masonry Specialist and the Founder of GO Masonry LLC, a masonry company based in Northern Virginia. Gerber specializes in providing brick and stone laying services, concrete installations, and masonry repairs. Gerber has over four years of experience running GO Masonry and over ten years of general masonry work experience. He earned a BA in Marketing from the University of Mary Washington in 2017.
    Gerber Ortiz-Vega
    Masonry Specialist & Founder, GO Masonry LLC
    Expert Answer
    First you should rip out a piece of the mortar and bring it to a local brick supplier so they can match the mortar to the different types they have available. Once you find the perfect color match, mix the mortar according to the instructions. Then, fill the mortar joint using the mortar bag. Give it 20-30 minutes to harden, then use a jointer tool to shape off the mortar.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 2
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Avoid pointing in extreme temperature highs or lows. If the outside temperature is under 40°F (4°C), the cold will make your mortar brittle. If the outside temperature is over 90°F (32°C), the heat will dry out your mortar and keep it from drying properly. [17]
        Thanks
        Helpful 0 Not Helpful 0
      • Avoid using cement to point a wall. Cement is weaker than lime mortar and is vulnerable to both salts and sulfates.
        Thanks
        Helpful 0 Not Helpful 0
      • If the wall is completely dry and it still looks messy after you finish, wipe it down with a diluted muriatic acid mix.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Mortar
      • Sand
      • Water
      • Bucket or wheelbarrow
      • Trowel
      • Pointing tool (a small, pointed trowel)
      • Length of garden hose (optional)
      • Wire brush

      You Might Also Like

      How to
      Hang Something on Brick
      How to
      Nail Into Brick
      How to
      Build a Chimney
      How to
      Build a Brick Wall
      How to
      Hang on Stucco Without Drilling
      How To Sculpt Stone Like an Artist
      How to
      Stucco a House
      How to
      Drill Into Brick: Preparation, Tools, and Best Methods
      How to
      Make a Brick Kiln
      Guide to Building a Brick Column: Footing, Courses, & Capstone
      How to
      Clean Soot from Brick
      An Expert-Approved Guide to Cutting Brick like a Pro
      How to
      Drill Through Granite
      How to
      Remove Efflorescence from Brick
      Advertisement

      References

      1. ↑ https://www.homebuilding.co.uk/repointing-old-walls/
      2. ↑ Gerber Ortiz-Vega. Masonry Specialist & Founder, GO Masonry LLC. Expert Interview. 10 March 2020.
      3. ↑ http://www.dummies.com/home-garden/exteriors/brick-repair/how-to-repoint-a-brick-wall/#slide-1
      4. ↑ http://www.diydoctor.org.uk/projects/mortarmixes.htm
      5. ↑ http://www.dummies.com/home-garden/exteriors/brick-repair/how-to-repoint-a-brick-wall/#slide-1
      6. ↑ http://www.diydoctor.org.uk/projects/mortarmixes.htm
      7. ↑ Gerber Ortiz-Vega. Masonry Specialist & Founder, GO Masonry LLC. Expert Interview. 10 March 2020.
      8. ↑ https://www.youtube.com/watch?v=9LstAzOKunE&feature=youtu.be&t=34s
      9. ↑ http://www.dummies.com/home-garden/exteriors/brick-repair/how-to-repoint-a-brick-wall/
      1. ↑ https://www.youtube.com/watch?v=9LstAzOKunE&feature=youtu.be&t=54s
      2. ↑ Gerber Ortiz-Vega. Masonry Specialist & Founder, GO Masonry LLC. Expert Interview. 10 March 2020.
      3. ↑ https://www.youtube.com/watch?v=9LstAzOKunE&feature=youtu.be&t=59s
      4. ↑ https://www.youtube.com/watch?v=9LstAzOKunE&feature=youtu.be&t=1m4s
      5. ↑ https://www.homebuilding.co.uk/repointing-old-walls/
      6. ↑ http://www.diydoctor.org.uk/projects/Pointingbrickwork.htm
      7. ↑ https://www.homebuilding.co.uk/repointing-old-walls/
      8. ↑ https://www.thisoldhouse.com/masonry/21015302/repointing-brick

      About This Article

      Thanks to all authors for creating a page that has been read 78,516 times.

      Reader Success Stories

      • Len

        May 14, 2022

        "Haven't used it yet but impressed with the article's clarity and detail."
      Share your story

      Did this article help you?

      Advertisement