Corian countertops are a variety of solid-surface countertops that come in finishes from matte to high-gloss. Over time, the glossy finishes can get dirty, dull, and damaged. In many cases, simply cleaning your Corian countertops with certain products and methods will restore and maintain their shine. You can even buff out scratches with an abrasive pad and cleaner. When cleaning and buffing aren’t quite enough, use a commercial countertop polish to bring back the glossy finish. In the case that you aren’t able to polish the countertops to your satisfaction, getting them professionally refinished is an option.

Part 1
Part 1 of 3:

Cleaning the Countertop

PDF download Download Article
  1. Spray the entire countertop with an ammonia-based household cleaner or countertop cleaner from a spray bottle. [1] Wipe the countertop with a microfiber cloth in circular motions to clean it. [2]
    • Don’t use non-ammonia-based household sprays, such as some window cleaners, because they will leave residues behind.
  2. [3] Fill a bowl with warm water and put 2-3 drops of liquid dish soap in it. Soak a sponge in the solution and wipe down the countertop in circular motions to clean it. Rinse the sponge to remove all the soap and wipe away the soap residue from the counter. [4]
    • Make sure to thoroughly wipe away all the soap residue so that soap scum doesn’t build up on the countertop.

    Tip : Warm soapy water and ammonia-based household spray cleaners are equally effective for cleaning Corian countertops, so choose a method based on your personal preference and what you have available.

    Advertisement
  3. Wet a sponge then pour an abrasive household cleaner onto the scrubber side of the sponge. Scrub the countertop using small overlapping circular motions wherever you see stains or buildup of residue or soap scum. Rinse the sponge out and wipe the cleaner off the countertop with the soft absorbent side. [5]
    • You can use this cleaning method to keep your Corian countertops shiny. Perform the process 1-2 times a month, even if the countertop is not particularly dirty, to keep the finish looking glossy.
  4. Wipe the countertop completely dry immediately after cleaning it to prevent buildup of residues. A film can build up even when you just let plain water sit on the counter, so it’s important to keep it dry at all times. [6]
    • Keep a kitchen towel or paper towels handy to wipe up spills on your countertop right away when they happen.
  5. Advertisement
Part 2
Part 2 of 3:

Buffing Out Fine Scratches

PDF download Download Article
  1. Clean the countertop with an ammonia-based spray cleaner or warm soapy water for minor residue buildups, or with an abrasive cleaner for heavier buildups. Don’t dry off the countertop as you normally would after cleaning. [7]
    • It’s important to clean the countertop thoroughly because any dirt or grime can clog up the cleaning pad when you are attempting to buff out the scratches.
    • This method works to remove minor scratches, scorch marks, and very stubborn stains.
  2. Wet the pad and pour some abrasive cleaner onto it. Rub over the scratch alternating between a linear back-and-forth motion and a side-to-side motion. [8] Change the direction you are scrubbing every 3-4 strokes until the scratch disappears. [9]
    • An example of an abrasive cleaning pad you can use for this is a Scotch-Brite pad.
    • You can buff your whole countertop at least once a month with an abrasive cleaner and an abrasive pad, working in circular motions instead of linear motions, to help the finish stay glossy and bright.

    Warning : Never cut or chop foods on your Corian countertops or you will scratch them. Don’t put hot pots, pans, or other objects directly onto Corian countertops or you will scorch them.

  3. Wipe the countertop down with a clean wet sponge to remove all the abrasive cleaner residue. Rinse the sponge and repeat as necessary until the countertop is completely clean. [10]
    • If you notice that the scratch is still visible after rinsing away the cleaner residue from on top, you can repeat the buffing process to try and get rid of it. However, in some cases the scratch might be too deep and this method won’t make it completely disappear.
  4. Wipe the countertop dry immediately after you have finished rinsing it to prevent film buildup from the water. Inspect it to make sure that the scratch has been buffed out and that the area blends in with the rest of the countertop. [11]
    • If the spot where you buffed out the scratch looks different from the rest of the countertop, repeat the process using circular motions over a larger area to blend it in until it is less noticeable.
  5. Advertisement
Part 3
Part 3 of 3:

Restoring Shine with Countertop Polish

PDF download Download Article
  1. Commercial polishes made for other types of countertops, such as granite, will also work to polish your Corian countertops. These types of polishes are available at home improvement stores or online. [12]
    • Check the label to make sure that it is safe for your countertops. Many labels will specify that the polish can be used on Corian. If it doesn’t specifically mention Corian, then check to see if it is safe to use on granite.
  2. Apply a small amount of the polish (or the amount recommended on the label) to a microfiber cloth. Rub it onto the Corian countertop in circular motions, reversing the direction your arm is making the circles in every 3-4 rotations. [13]
    • Make sure that the countertop is completely clean before you start applying polish to it.

    Tip : If you don’t want to put in the elbow grease and time required for polishing by hand, you can use a random-orbit electric sander with polishing pads to apply the polish instead.

  3. Work in alternating circular motions and wipe off the polish one section at a time. Grab another clean cloth if the one you are using gets too dirty with polish and isn’t buffing off the polish as effectively. [14]
    • Microfiber cloths are the best for buffing off the polish because they are super-soft and lint-free.
  4. Some countertops are just too old and damaged to get the shine back. Hire a professional countertop refinisher to come and sand down your countertops and then repolish them to get back the factory-finished look. [15]
    • Once you have a polished Corian countertop, clean it regularly to keep it shiny and protect the finish, so you won’t have to get it refinished again any time soon.
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      Things You’ll Need

      • Ammonia-based household cleaner
      • Warm soapy water
      • Sponges
      • Microfiber cloths
      • Abrasive household cleaner
      • Abrasive cleaning pad
      • Countertop polish

      References

      1. Ahmed Mezil. Cleaning Specialist. Expert Interview. 13 April 2021.
      2. http://www.corian.com/-use-care-
      3. Ahmed Mezil. Cleaning Specialist. Expert Interview. 13 April 2021.
      4. http://www.corian.com/-use-care-
      5. http://www.corian.com/-use-care-
      6. http://www.corian.com/-use-care-
      7. http://www.corian.com/-use-care-
      8. Ahmed Mezil. Cleaning Specialist. Expert Interview. 13 April 2021.
      9. https://homesteady.com/12197691/how-to-clean-corian

      About This Article

      Thanks to all authors for creating a page that has been read 106,457 times.

      Did this article help you?

      Advertisement