How to Polish Marble

PDF download Download Article
PDF download Download Article

Marble is a popular option for countertops, tabletops, flooring, and fireplace mantles. While it brings natural beauty to your home, it requires special care to prevent damage and stains, which occur easily due to marble’s porous surface. [1] With a little time and elbow-grease, you can polish your natural or cultured marble and make it look new again.

Part 1
Part 1 of 3:

Preparing Your Marble

PDF download Download Article
  1. You will need a mild detergent, 3-4 soft cloths, a poultice for stain removal (optional), a polishing compound, a low-speed polisher with a felt wheel (optional), and a marble sealant. You can collect the items yourself or purchase a kit. [2]
    • If you have cultured marble, make sure that your product says it’s for cultured marble.
    • If you do not have access to a polisher, you can apply your marble polish with a soft rag; however, this method is very tiring. [3]
    • If you have stains, remove them with a poultice before polishing. [4] Keep in mind that if you use a poultice you will need to wait at least 24 hours to continue to the next step. [5]
    • Use an etch remover polishing compound if you have water rings.
  2. If your marble is surrounded by other surfaces such as wood or chrome that could be damaged by the products you will use, protect them with painter’s tape.
    • Cover wood and chrome surfaces.
    • If you have wood floors, consider taping around the edges of the bottom of the cabinet if you will be using a spray product because the product could land on the floor.
    Advertisement
  3. Test a small area before you clean the entire slab. If you have stains, try removing them with just your detergent by gently working the area with your damp cloth over the stain. [6]
  4. A poultice will remove stains that have settled into the porous surface of your marble. Polishing your marble will not remove the stains; instead, you will be sealing them in. [7]
    • You can purchase a commercial poultice or you can make your own. To make a poultice, mix just enough hydrogen peroxide into flour to create a paste. [8] You can also use a combination of one tablespoon ammonia, half a cup hydrogen peroxide while slowly adding baking soda until it forms a thick paste. [9]
    • Smooth the poultice onto the stain and seal it by taping plastic wrap over it. Leave your poultice on for at least 24 hours. Old stains may require more time. Determining the time needed to remove old stains is a trial-and-error process. [10]
    • After 24-48 hours, remove the plastic, pour a little water over the dry poultice, and wipe it away with a soft cloth. Thoroughly dry the area.
    • If the stain persists, repeat this process again.
    5. Advertisement
Part 2
Part 2 of 3:

Using Your Polishing Compound

PDF download Download Article
  1. Consult the side of the container for proper measurements, as different products recommend different amounts. Put the compound on the small section where you will begin work. [11]
    • Do not apply polishing compound to the entire piece of marble at once.
    • How much polish you should apply will depend on the type of polish you choose and the size of the space you are polishing.
    • If you are not sure how much polish to apply, start with a little and add more as needed. It’s easier to add more than it is to remove excess.
  2. While you can use either, it takes longer to use a soft cloth, and if you do not keep up the same level of pressure it could affect your results, so a low-speed polisher might be your best bet.
    • If you have a drill, you can replace the drill bit with a felt-top sanding disk so that you can use it as a polisher.
  3. [12] Only work on one small section of 1-2 feet at a time to create an even finish and avoid having your polishing compound dry out or begin to clump up. Working in small sections also helps you evenly distribute the polish because you are able to add small amounts of polish as you go.
    • Start in a corner and work your way around the entire area to make sure you apply an even polish. If you start in the middle, then you may miss a spot.
  4. If you're using a soft cloth or the soft side of a new sponge, make tight, circular movements. [13] If you're using a polisher, slowly move it in a controlled circular motion. When you finish with the flat sides, polish the corners with a soft rag, continuing your circular movements.
    • Use a low to medium speed if you’re using a polisher.
  5. Use a dry cloth to wipe away the residue, and then finish with a damp cloth to ensure a clean surface.
  6. Wait 24 hours before applying your sealant.
    • If your cultured marble still has stains or shows damage, you can polish it with a buffing compound and then again with a polishing compound. If neither of these products works, cultured marble can be wet sanded using 1,000-grit wet/dry sandpaper. [14]
    • Don’t try buffing compound or wet sanding on natural marble because it is more easily damaged.
    7. Advertisement
Part 3
Part 3 of 3:

Sealing Your Polished Marble

PDF download Download Article
  1. Sealants can be topical or impregnator. Topical sealants sit on top of the marble and prevent staining, while impregnators go below the surface and repel water and oils while still allowing the marble to breathe. Countertops and vanities are usually sealed with an impregnator, while floors and other types of marble may be better served by a topical sealant.
    • Don’t seal cultured marble because it’s stronger and doesn’t need a sealant. Some cultured marbles won’t take a sealant. [15]
    • You don’t need to seal marble in a shower unless you plan to use products that stain. Personal care products don’t stain marble unless they’re allowed to sit. Shaving cream can cause etching, but that’s not prevented by a sealant.
  2. A sealant won't prevent all stains, but will provide some protection to your marble surface. You can purchase marble sealant in a spray bottle at a hardware or home goods store. As you spray on your sealant, make sure that the entire surface of your marble is wet.
    • Don’t let the sealant fully dry or it will streak.
    • You can add water to the sealant by spraying on water or dabbing with a damp cloth. Adding water to sealant that is drying too fast will prevent streaking.
  3. Consult your container for the application time. After your sealant has been on the marble for the recommended time, use a dry cloth to wipe the surface dry.
    • Most sealants recommend a wait time of 10-20 minutes. [16]
    • If you let it sit longer than the recommended time, the sealant will streak.
    • If your sealant recommends two applications, then repeat the steps once.
  4. Allow your marble to sit for 6-8 hours. Avoid using or placing anything on your marble until it has completely dried because the seal needs time to set. You don’t want to risk getting the sealant that’s seeped into the surface wet while it’s still fresh.
    • Marble should be sealed every 6-12 months.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Which polish is bad for marble?
    Bridgett Price
    House Cleaning Professional
    Bridgett Price is a House Cleaning Professional based in Phoenix, Arizona. She has over 8 years of experience in the industry and is the Co-Owner of Maid Easy, a maid service company servicing the Phoenix, Arizona metropolitan area witih over 17k professional cleanings under its belt. Maid Easy was featured on CNBC's 'Made It!' program and was voted as The Best of The Desert - Residential Cleaning Service by AZCentral. She holds a Master of Management from the University of Phoenix, specializing in digital and traditional marketing.
    Bridgett Price
    House Cleaning Professional
    Expert Answer
    Avoid harsh and acidic cleaners, like vinegar, citrus, or ammonia, since they can damage the sealant on your marble and allow bacteria to leech into it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 3
  • Question
    How do I remove a large vinegar stain from my marble floor?
    Community Answer
    You have to buff and refinish it. Vinegar stains happen from acid eating into the marble and then dust penetrating the "bald" porous surface. You have to make sure the top dust is buffed off and then seal the spot so that new dust doesn't accumulate in it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 10
  • Question
    How do I get scratches out of natural marble?
    Community Answer
    If the scratches are very small and only on the surface, they can sometimes be buffed out with a soft cloth and a good cleaning.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 26 Helpful 22
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • Water
      • Mild detergent
      • Soft cloths (chamois or microfiber are ideal)
      • Marble polish
      • Marble sealant
      • Poultice (optional)
      • Polisher with a felt wheel (optional)

      You Might Also Like

      How to
      Polish Titanium
      How to
      Wash Marble Floors
      How to
      Protect a Marble Countertop
      How to
      Keep Your Kitchen Clean and Safe
      How to
      Dust Your Entire House
      How to
      Clean Alabaster
      How to
      Clean Cultured Marble
      What Should You Use to Clean Marble?
      How to
      Polish Slate
      How to
      Clean Bluestone
      How to
      Clean Sandstone
      How to
      Care for Jade: Cleaning, Polishing, & Storage
      How to
      Polish a Kota Stone
      How to
      Clean Soapstone
      Advertisement

      References

      1. ↑ Bridgett Price. House Cleaning Professional. Expert Interview. 23 May 2019.
      2. ↑ https://www.youtube.com/watch?v=anEl0vgrqnA
      3. ↑ https://www.youtube.com/watch?v=anEl0vgrqnA
      4. ↑ Guy Peters. House Cleaning Professional. Expert Interview. 12 July 2021.
      5. ↑ https://www.thisoldhouse.com/how-to/how-to-remove-spots-kitchen-countertops
      6. ↑ https://www.youtube.com/watch?v=anEl0vgrqnA
      7. ↑ https://www.thisoldhouse.com/how-to/how-to-remove-spots-kitchen-countertops
      8. ↑ https://www.thisoldhouse.com/how-to/how-to-remove-spots-kitchen-countertops
      9. ↑ Guy Peters. House Cleaning Professional. Expert Interview. 12 July 2021.
      1. ↑ https://www.thisoldhouse.com/how-to/how-to-remove-spots-kitchen-countertops
      2. ↑ https://www.youtube.com/watch?v=anEl0vgrqnA
      3. ↑ Guy Peters. House Cleaning Professional. Expert Interview. 12 July 2021.
      4. ↑ Guy Peters. House Cleaning Professional. Expert Interview. 12 July 2021.
      5. ↑ https://www.todayshomeowner.com/how-to-restore-the-shine-on-cultured-marble-countertops/
      6. ↑ http://www.countertopspecialty.com/remove-dry-sealer-off-polished-marble.html
      7. ↑ http://www.countertopspecialty.com/remove-dry-sealer-off-polished-marble.html

      About This Article

      Article Summary X

      Before polishing marble, clean the surface with a clean, damp rag, then use a poultice to remove any stains, if necessary. Apply a polishing compound using a soft cloth, working in small sections and using circular movements. When you’ve finished polishing, use a dry cloth to wipe away excess compound and wait 24 hours. When the marble is completely dry, apply a sealant and wait for 10 minutes, then wipe it off with a dry cloth. Let the marble dry again for 8 hours before placing anything on it. If you want to learn how to use an electric polisher on your marble, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 613,694 times.

      Reader Success Stories

      • Ray Conklin

        Oct 4, 2017

        "Great photos of the step by step procedures and the time line, so I know I need a day or two to get excellent ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement