Simple DIY Ways to Polish & Restore Plastic So It Shines

PDF download Download Article
Everything you need to know to smooth & buff plastic surfaces
PDF download Download Article

Have you ever gotten a scratch on the shiny plastic surface of your new gaming system? Or has the plastic cover on your car’s headlights turned cloudy? If so, you may have wondered if there was any way to polish that plastic to make it look new again. This article covers how to remove scratches from plastic and polish the surface until it shines. Plus, we’ll tell you how to prevent scratching and oxidation in the future.

How to Remove Scratches & Polish Plastic

Always start by washing your plastic with a mild cleanser to remove dirt. Then, buff out scratches with abrasives such as toothpaste, baking soda, or sandpaper. Finally, remove oxidation and make your plastic shine with a polishing compound or a buffing wheel.

Section 1 of 5:

Getting Rid of Scratches

PDF download Download Article
  1. Mix a few drops of dishwashing soap in 1 cup (240 mL) of warm water to clean the plastic . Dip a soft cloth or sponge into the soapy water and lightly scrub the soiled section. Your goal is to remove as much dirt and debris as possible from the surface, as it may scratch the plastic if you don't. Once the dirt and debris are gone, rinse the plastic with clean water and dry it with a soft towel. [1]
    • With car headlights or other car plastics, use car soap to avoid damaging the paint finish on your car.
    • If you're cleaning a large object, such as vinyl siding, spray it down with plain water from a hose.
    • If the plastic you're cleaning is small, use a cotton ball and rubbing alcohol.
    • If some of the dirt is stubborn, try a melamine sponge and water to help remove it.
  2. If you're buffing something like the headlights on your car, a light-tack tape helps protect the paint finish around the headlights. After making sure the area is clean and dry, line tape up against the edge of the headlights on all sides. [2]
    • Use your fingers to smooth out the tape so there are no wrinkles.
    • Painter's tape works well because it’s easy to remove, but masking tape also works.
    Advertisement
  3. The silica in toothpaste buffs the plaque off your teeth and also works on shallow scratches. Simply put a pea-sized dab on a cotton cloth or even a clean toothbrush and rub the scratched area in a circular motion. Keep working until the scratches are gone. [3]
    • Wash the paste off to make it easier to see your progress. Apply more and continue to rub the area if the scratches are still visible.
    • This works best on plastics that are injection molded. Identify injection-molded plastics by the small dimple on the bottom.
    • Toothpaste is a very mild abrasive, so it may take more elbow grease to see results.
  4. Green Cleaning Expert Susan Stocker recommends mixing two spoonfuls of baking soda with enough water to make a thick paste. Use a cotton ball, cloth, or a clean toothbrush to apply the paste to the plastic. Rub the area with small, circular motions to remove the scratches. [4]
    • Rinse off the paste occasionally to see how your work progresses.
  5. A buffer is a good option for harder plastics like acrylic and polycarbonate. Turn the buffer on and hold the plastic up to it so the surface buffs the scratched section. After a few minutes, the scratch disappears. [5] It will also work to buff soft plastics, like motorcycle trim.
    • Choose a cotton buffing wheel for removing scratches in acrylic or polycarbonate.
    • Buffing wheel attachments for drills also effectively remove scratches. Simply hold the buffing surface close to the plastic to remove the scratch.
    • Both acrylic and polycarbonate are very hard plastics. Acrylic is tougher than polycarbonate. Identify polycarbonate by its dark edge.
  6. With a 3-part polishing system, start by putting the roughest compound on a rag and rubbing at the scratch in a circular motion until the edges of the scratch are mostly gone. Wipe off the polishing compound . Then, move on to the next roughest, applying it in a circular motion. Once that's worn down the scratch, remove it with a rag. Finally, use the smoothest polisher to finish up. It should leave a smooth, scratch-free surface. [6]
    • If you're working with polycarbonate, which has a dark edge, start with the second roughest polishing liquid.
    • This method works well on car headlights.
    • A wide range of plastic polishing compounds are available for different types of plastics, including plexiglass, resin, and acrylic. Liquid, paste, and putty-style products are available.
  7. Start by rubbing the area with 220-grit sandpaper dipped in water. Use a circular motion. After working on it for a few minutes, move to 320- grit sandpaper , then 400-grit . The finer sandpaper produces a smoother finish. [7]
    • Make sure to get sandpaper for wet sanding so it doesn't fall apart.
    • Sandpaper is also effective for removing scratches on car headlights.
    8. Advertisement
Section 2 of 5:

Making Plastic Shiny Again

PDF download Download Article
  1. Start with 800-grit paper dipped in water to minimize friction and heat that may melt and distort the surface of the plastic. Rub the oxidized area in a circular motion to buff it out. After a few minutes, move up to 1,000-grit and then 2,000 grit . [8]
    • Always use sandpaper meant for wet use to remove scratches from plastic, or it may fall apart as you work.
  2. This works well for soft plastics like motorcycle trim and hard plastics like headlights. Turn the buffing wheel on and hold it with the edge against the plastic. For soft plastics, use a very light touch to get the best shine, and make sure to keep it moving in a circular motion. [9]
  3. Acrylic plastic is so hard, polishing it with a flame doesn’t cause damage. For a rough edge, hold the acrylic edge up using a flame-resistant glove . Turn the handheld gas torch on and run it along the edge quickly so it heats the edge and smooths it out. [11]
    • If your acrylic edge has deep scratches, use 320-grit sandpaper first to smooth it out.
    4. Advertisement
Section 3 of 5:

Removing Oxidation from Vinyl Paneling

PDF download Download Article
  1. Pour 5 cups (1,200 mL) of vinegar into 1 gallon (3.8 L) of water and stir to combine. Spray it on vinyl paneling with a spray bottle. Work on a small area at a time so the vinegar doesn't dry out. Then, scrub the area with a telescoping cleaning brush with soft bristles. Keep moving around the area, spraying and scrubbing until the oxidation is gone. [12]
    • When you're finished, spray the area down with a hose.
    • For a stronger cleaner, mix 2 ⁄ 3 cup (160 mL) of a household cleaner, 1 ⁄ 3 cup (79 mL) of laundry detergent, and 4 cups (0.95 L) of bleach into 1 gallon (3.8 L) of water. DO NOT use a cleaner with ammonia. Mixing bleach and ammonia creates toxic fumes.
Section 4 of 5:

Preventing Scratches in Plastic

PDF download Download Article
  1. Debris and particles on the surface of plastic cause scratches. Regular cleanings with a vinegar and water mixture help keep your plastic clean and scratch-free. Mix ¼ cup (59.14 mL) of white vinegar, 2 ½ cups (591.47 mL) of water, and ½ teaspoon (2.46 mL) of dish soap in a spray bottle. [13]
    • Shake the spray bottle, then lightly spray the spoiled plastic. Then, wipe away any dirt and debris with a soft cloth.
  2. UV light discolors and weakens plastic. [14] Store plastic items away from windows and park cars and other vehicles with plastic parts in a garage or shaded area.
    • Cover your car with a fabric car cover to protect the plastic pieces from UV rays if you don’t have a garage or carport.
    3. Advertisement
Section 5 of 5:

Plastic Polishing FAQs

PDF download Download Article
  1. According to the Dremel website , a Dremel tool used with a polishing bit and polish compound removes oxidized film or small imperfections from plastic. Use a Dremel to remove minor scratches from resin pieces as well. [15]
    • Use a medium to low speed on your Dremel and lightly touch the polishing attachment to polish the piece.
  2. Applying a coat of WD-40 restores faded plastic pieces on cars and motorcycles. Simply spray a thin layer of WD-40 on the plastic and then wipe it off with a clean cloth. [16]
    • Do not use WD-40 on polycarbonate and clear polystyrene.
  3. Yes, hydrogen peroxide restores white plastic that has yellowed over time. Pour the hydrogen peroxide into a container and then add the plastic piece. Place the container in a sunny location and allow it to soak until the yellow stain lifts and the plastic is white again. [17]
    • This method also works on clear plastics that have taken on a yellowish cast.
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Avoid trying to repair coated plastics like eyeglasses. They can't be polished, and you risk damaging them further. [18]
        Thanks
        Helpful 0 Not Helpful 0
      • Always wear a dust mask and eye protection when polishing plastic with a buffing wheel or drill.
        Thanks
        Helpful 0 Not Helpful 0


      Advertisement

      You Might Also Like

      How to
      Cut Acrylic Sheets
      How to
      Remove Scratches from Plastic
      How to
      Fold a Plastic Bag
      How to
      Remove Plexiglass Scratches
      How to
      Remove Plastic Smell
      How to
      Glue Plastic
      How to
      Adhere Plastic to Wood
      How Do You Know If Rice Is Plastic? (Plus, Origins of the Viral Rumor)
      How to
      Polish Acrylic
      How to
      Dye Acrylic Plastic
      How Do You Bend Acrylic? DIY Tips & Tricks
      How to
      Make Plastic
      How to
      Build a Straw Bridge
      How to
      Easily Mold Acrylic Plastic Sheets
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about working with plastic, check out our in-depth interview with Susan Stocker .

      References

      1. ↑ https://sciencing.com/methods-remove-oxidation-plastic-8716902.html
      2. ↑ https://sciencing.com/methods-remove-oxidation-plastic-8716902.html
      3. ↑ https://www.e-architect.com/articles/how-to-remove-scratches-from-clear-plastic
      4. ↑ https://www.e-architect.com/articles/how-to-remove-scratches-from-clear-plastic
      5. ↑ https://www.youtube.com/watch?v=4yp-kumgpoM&feature=youtu.be&t=261
      6. ↑ https://www.youtube.com/watch?v=4yp-kumgpoM&feature=youtu.be&t=283
      7. ↑ https://www.youtube.com/watch?v=mKHeZusdTTM&feature=youtu.be&t=219
      8. ↑ https://www.bobvila.com/articles/how-to-remove-scratches-from-plastic/
      9. ↑ https://www.youtube.com/watch?v=mKHeZusdTTM&feature=youtu.be&t=255
      1. ↑ https://sciencing.com/methods-remove-oxidation-plastic-8716902.html
      2. ↑ https://www.youtube.com/watch?v=4yp-kumgpoM&feature=youtu.be&t=130
      3. ↑ https://sciencing.com/methods-remove-oxidation-plastic-8716902.html
      4. ↑ https://www.realsimple.com/home-organizing/cleaning/cleaning-vinegar
      5. ↑ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4320144/
      6. ↑ https://youtu.be/FPM-MRcPc3E?t=87
      7. ↑ https://youtu.be/mNUiqanVzcE?t=17
      8. ↑ https://www.lovetoknow.com/home/cleaning/how-whiten-yellowed-plastic-simple-safe-methods
      9. ↑ https://www.youtube.com/watch?v=4yp-kumgpoM&feature=youtu.be&t=40

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 154,756 times.

      Reader Success Stories

      • Steven Smith

        Aug 23, 2020

        "This article helped me to figure out which method to use by giving me several options. I was cleaning a rotating ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement