How to Polish Slate

Co-authored by Jon Gholian

Last Updated: July 23, 2024 References

Slate is a fine-grained material used on roofs, as tile, or in furniture. Because it is composed of tiny minerals, such as quartz and hematite, slate often gives off an attractive sparkle. While you can polish slate, the result can be slippery and more difficult to clean. Consider regular cleaning and buffing as a simpler alternative.

Part 1

Part 1 of 3:

Cleaning the Slate

Download Article

1
Strip away dirty wax if necessary . If the slate is covered in a layer of discolored or cracking wax, this needs to go before you can clean and polish it. Select a commercial floor stripper appropriate for stone and dilute with water according to label. Mop this over the floor and let dry, then rinse if directed by the label.
- Floor strippers are powerful chemicals. Protect yourself with goggles, rubber gloves, and excellent ventilation.
2
Clear away dirt and debris. Sweep the slate using a soft broom. ^{[1]
X
Expert Source

Jon Gholian
Cleaning Specialist

Expert Interview. 15 December 2020.} If you are handling slate tiles, make sure you remove all debris from the grout.
- You may use a vacuum cleaner instead, but only with a soft brush attachment. ^{[2]
  X
  Expert Source
  
  Jon Gholian
  Cleaning Specialist
  
  Expert Interview. 15 December 2020.} Handling the vacuum too vigorously may chip the slate. ^{[3]
  X
  Research source}
Advertisement
If your slate looks dirty or streaky, clean it before you start polishing. In most cases, mopping with warm water and plenty of soap will be enough to remove the dirt. ^{[4]
X
Expert Source

Jon Gholian
Cleaning Specialist

Expert Interview. 15 December 2020.} Rinse thoroughly to remove soap suds, then let dry until the slate looks dull and uniform.
4
Remove stubborn stains. If you clean the slate twice and still see grime, move on to stronger cleaners. An alkaline (high pH) cleaner such as ammonia-based glass cleaner or natural stone cleaner is your best bet for slate. If that doesn't work, rinse it off and try a mild acidic cleaner.
- Your best option is an alkaline commercial cleaner from a home improvement store, specifically for slate or at least for natural stone.
- Test all cleaners on a corner first. Acid can discolor some types of slate. ^{[5]
  X
  Research source} Alkaline cleaners are less likely to cause damage, but this is not guaranteed.

Part 2

Part 2 of 3:

Buffing to a Smooth Surface

Download Article

Wet the slate thoroughly. Buffing while dry may cause further scratches.
Buy 200 grit diamond pad or wet & dry sandpaper from a hardware store. Wet the abrasive, then rub it gently over scratched areas until the scratches are less visible.
Rinse off the slate and the abrasive to ensure that no dust remains to cause further scratches.
Move on to a 400 grit sanding surface. Once again, wet the slate and the abrasive, then start buffing. Rub it over a wider area this time to ensure a more uniform look.
Wash the dust off thoroughly from all materials.
Wet the slate and the 600 grit abrasive. Buff over the entire slate surface. Continue rubbing until the scratches are no longer visible. Rinse thoroughly when finished.

Part 3

Part 3 of 3:

Creating a Glossy Surface

Download Article

A small amount of linseed oil will create a dark shine on the stone without causing damage. However, oil attracts dirt and makes the slate harder to clean. ^{[6]
X
Research source} For this reason, oil is not recommended for floors or outdoor surfaces.
2
Learn the pros and cons of sealer. Stone sealer can create as glossy a surface as you like, but can make it very slippery, especially when wet. If the slate is outdoors or in an unheated room, water can seep under the sealer and crack off the sealer when it freezes and thaws.
- Slate can be honed (smooth) or rough (with small jagged edges). Sealer is more effective on honed slate.
3
Apply the sealer. If you do decide to apply a sealer, find one specifically designed for slate or at least natural stone, preferably a penetrating sealer for long-lasting protection. Apply a thin layer with a paintbrush, following the grain of the slate. Let dry for two hours (or as the label recommends), and reapply as necessary.
- Test the sealer on a corner to ensure it results in the desired gloss/matte, slip resistance, and color.
Wait for at least 24 hours before walking over the fresh sealer.

Expert Q&A

Search

Add New Question

Question

What are the things I can use to clean slate?

Jon Gholian
Cleaning Specialist
Jon Gholian is a Cleaning Specialist and the Founder of Cleany, a home and office cleaning concierge service based in New York City, New Jersey & Miami. Cleany specializes in providing quality cleaning and handyman services to all their customers. All Cleany employees are insured, bonded, and professionally trained. Cleany has been featured in the New York Times, Bravo & Redfin.

Jon Gholian

Cleaning Specialist

Expert Answer

You can use a soft broom, a vacuum cleaner with a soft brush attachment, dish soap, and warm water.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 1
Question

How can I laminate slate?

Community Answer

You should consult a flooring expert to ensure that it is done properly.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 8 Helpful 3
Question

Can I use a penetrating enhancing sealer over the linseed oil?

Community Answer

No, the oil will prevent it sticking to the slate, you will have to degrease it first.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 5

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

To keep your slate floor in good condition, do not place rubber mats on it. The rubber can stick to the slate and damage its surface. ^{[7]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Slate floors also can be dry-mopped daily in between polishing. Use a good quality dust mop that is not oil based. Oil will saturate the slate and dull its surface.

Thanks
Helpful 4 Not Helpful 4
Do not use abrasive cleaners on your slate.

Thanks
Helpful 1 Not Helpful 4

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You'll Need

Soft-bristled brush or broom
Vacuum
Mild dishwashing liquid
Water
Bucket
Mop
Alkaline cleaner
Wet & dry sandpaper, or diamond pad (200, 400, and 600 grit)
Natural stone sealer

[1]

Expert Source

Jon Gholian
Cleaning Specialist

[2]

[3]

[4]

[5]

[6]

[7]

Log in

How to Polish Slate

Steps

Cleaning the Slate

Buffing to a Smooth Surface

Creating a Glossy Surface

Expert Q&A

Video

Tips

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories