A Step-by-Step Guide to Preparing a Wrought Iron Fence for Painting

PDF download Download Article
PDF download Download Article

Decorative wrought iron fences are beautiful and sturdy, and can add an air of elegance to your home or garden. However, constant exposure to the elements can do quite a bit of damage to the iron surface. Applying a fresh coat of paint will keep your fence in great shape. In order to successfully paint a wrought iron fence, you will need to properly prepare the metal surface and surrounding area. Start by scraping off any remaining rust and paint, then giving the fence a good sanding. Use an oil-based primer and apply an even coat over the whole fence. After the primer dries, your fence is ready for painting.

Things You Should Know

  • Remove old paint with a metal scraper or wire brush. Then, sand the fence with 150-grit sandpaper.
  • Then, clean the fence with mineral spirits to remove paint chips and dust.
  • Cover the fence with an oil-based primer and then spray on a primer. Let the primers dry for 2-4 hours before painting.
Part 1
Part 1 of 2:

Removing Paint and Rust

PDF download Download Article
  1. Removing all the paint and rust from a fence is a dirty job. Keep your property clean by laying out a sheet or drop cloth to catch falling debris. Cover your grass, porch, sidewalk, and any other areas that might get dirty during the job. [1]
    • Try to avoid doing this job in windy weather to reduce the mess.
    • Scraping, sanding, and priming is a long process. Start early in the morning and plan on working all day. The process may take into a second day, depending on how large the fence is.
  2. Paint and rust shards can irritate your skin, throat, and eyes. Protect yourself with the proper equipment before starting. Cover your eyes with goggles and put on a dust mask. Wear gloves to prevent cuts and irritation. [2]
    • Also cover all of your exposed skin with long sleeves and pants to prevent irritations from paint shards.
    • All the necessary protective gear is available at hardware stores or online. If you order from the internet, make sure you can return the items if they don't fit.
    Advertisement
  3. Any leftover paint or rust on the iron will prevent a new coat of paint from sticking properly. Take a metal scraper and rub all the flat sections of the fence. Scrape back and forth until the paint and rust comes off. [3]
    • Don’t miss any spots. Scrub all the spots you can reach with the scraper before moving on.
    • This step only removes flaking rust and metal, it doesn’t smooth out the iron surface. Don’t worry if the iron is still rough after scraping it.
    • You can also use a power washer to remove any loose rust or dirt. [4]
  4. Many fences have designs and a flat metal scraper won’t be able to reach into rounded or curved areas like these. Take a wire brush and scrub all the areas you couldn’t reach with the scraper. Rub back and forth to flake off any paint and rust. [5]
    • Don’t miss any spots. Any paint or rust you leave behind will damage your new coat of paint. Be thorough and reach every spot with the brush.
    • If there are still tough rust spots that won’t come off, try using a powered grinder to remove them. This uses a spinning stone to grind away rust. Wear gloves and goggles if you use this tool, and hold it against any rusty spots until they're smooth. You can buy or rent a powered grinder from a hardware store.
  5. Sanding smooths the iron out in preparation for a fresh coat of paint. [6] Use a 150-grit paper or sanding sponge and sand the whole surface. Use a steady, back and forth motion to grind down and rough spots. [7]
    • Remember to get into any grooves and curved areas. Don’t miss any spots.
    • Don’t remove your protective gear when you sand. The dust can still irritate your eyes and skin.
    • Sanding is a time-consuming process. Be patient and don’t rush.
  6. Pour mineral spirits into a rag and rub it over the whole fence. Don’t worry about scrubbing hard. The rag should pick up any residue. Re-wet the rag if you have to, especially if you’re working on a large piece of iron. [8]
    • Mineral spirits are a relatively safe solvent, but they can still irritate your skin. Wear gloves and if you get any on your skin, flush the area under running water for 5 minutes. [9]
    • Mineral spirits are available at most hardware stores.
    • Don’t clean the iron with water. This will cause rust.
    7. Advertisement
Part 2
Part 2 of 2:

Priming the Metal

PDF download Download Article
  1. Don’t let the fence sit long after you sand the paint off. Apply primer as soon as possible to prevent rusting. Oil-based primers and paints are best for outdoor metal surfaces. They adhere much better to metal and resist the elements well. Look for a specialized metal primer at the hardware store. You can choose between a roll-on and spray primer. [10]
    • A roll-on primer is applied with a brush or roller like paint. This is more time-consuming, but it’s easier to control and avoids making a mess.
    • Spray primer works the same way as spray paint and is faster to work with. Make sure you cover everything in the area with a sheet to avoid getting primer on it and don’t work if it’s windy.
    • Ask a hardware store employee for help if you can’t find primers designed for metal.
  2. If you’re using roll-on primer, pour some into a paint tray. Then dip a paint roller in and wet it with primer. Use smooth strokes and apply the primer onto the fence. Work carefully and make sure you get between all the railings. If you leave any spots bare, the paint won't adhere properly. [11]
    • Roll back and forth a few times to make sure each spot is covered with primer.
    • Don’t miss any spots. Touch up areas the roller won’t fit into with a brush.
  3. Spray primer works the same way as spray paint . Shake the can well before spraying. Then hold the can about 8 inches (20 cm) from the metal and spray in a back and forth motion. Keep the can moving. Spray the entire fence with an even layer of primer. [12]
    • Don’t hover the can in one spot or the primer could pool and drip.
    • Wear goggles and a dust mask while using spray primer.
    • Place extra sheets around to prevent primer from getting on your grass, porch, or house. Stop working if the wind picks up.
    • If you feel dizzy or faint while spraying the primer, stop right away.
  4. The exact drying time depends on the weather and what type of primer you used. Spray primer dries faster and should be ready in about 2 hours. Roll-on primer takes closer to 4 hours. Both take longer if the weather is humid. [13]
    • Tap the fence gently with your finger to monitor how dry the primer is. If it still feels sticky, it’s not dry enough.
    • Start painting once the primer is dry for the best coat of paint.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I prepare a fence for painting?
    Andres Matheu
    Commercial Painter
    Andres Matheu is the Owner of Hömm Certified Painting Systems, an Interior and Exterior Residential painting business based in the Washington, DC Metro area. Andres specializes in interior and exterior residential painting, color consultations, cabinet refinishing, wallpaper removal, and epoxy flooring among other services. An EPA Lead-safe Certified Firm, Hömm Certified Painting Systems has been awarded the Best of Houzz 2019 Service, Angie's List Super Service Award 2019, and Northern Virginia Magazine's 2018 Best Home Experts (painters) award.
    Andres Matheu
    Commercial Painter
    Expert Answer
    First, you have to clean off any dirt or rust that's on the surface with a scraper or power washer. To make sure the paint sticks, make sure you sand the fence too.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    Is it true I should avoid painting an iron gate in temperatures over 95F?
    Community Answer
    Painting pretty much anything at that temperature is ill-advised. All paints and stains have instructions on the can that tell the best temperatures and humidity levels for painting/staining. In temperauress as high as 95 or above, the paint is drying too fast to keep a wet edge, making brush marks more visible. It is also not a safe temperature for laboring outside for too long.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 9
  • Question
    What are the consequences if I don't apply a rust inhibitor?
    Community Answer
    The rust inhibitor is the key to making sure the paint layer is strong so you don't have to repaint often. Skipping this step would mean you need to paint the fence again sooner.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 7
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Removing Paint and Rust

      • Wire brush
      • Metal scraper
      • Rag
      • Sandpaper
      • Drop cloth

      Priming the Metal

      • Spray or roll-on primer
      • Paintbrush
      • Paint roller

      You Might Also Like

      How to
      Remove Paint from Iron Railings
      How to
      Build a Wood Fence
      How to
      Build a Wooden Gate
      Your Guide to Placing Fence Posts in the Ground
      How to
      Install an Electric Fence
      9 Inexpensive Ideas to Make Your Chain Link Fence More Private
      How to
      Protect a Wooden Post from Rotting in the Ground
      How to
      Remove Fence Posts
      How to
      Straighten a Leaning Fence Post Yourself
      How to
      Make an Electric Fence
      How to
      Test an Electric Fence
      How to
      Dig Post Holes
      How to
      Replace a Fence Post in Concrete
      How to
      Remove a Chain Link Fence
      Advertisement

      References

      1. ↑ https://www.cpsc.gov/s3fs-public/painting.pdf
      2. ↑ https://www.bobvila.com/articles/how-to-remove-paint-from-metal/
      3. ↑ https://youtu.be/8JxHFDUtSHI?t=105
      4. ↑ Andres Matheu. Commercial Painter. Expert Interview. 28 July 2020.
      5. ↑ https://www.thisoldhouse.com/ask-toh/repainting-metal-railings
      6. ↑ Andres Matheu. Commercial Painter. Expert Interview. 28 July 2020.
      7. ↑ https://youtu.be/8JxHFDUtSHI?t=146
      8. ↑ https://www.bobvila.com/articles/how-to-remove-paint-from-metal/
      9. ↑ https://professionalartistmag.com/using-solvents/
      1. ↑ https://www.thisoldhouse.com/ask-toh/repainting-metal-railings
      2. ↑ https://youtu.be/8JxHFDUtSHI?t=180
      3. ↑ https://www.thisoldhouse.com/ask-toh/repainting-metal-railings
      4. ↑ https://www.paintspraypro.com/how-long-does-it-take-primer-to-dry/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 211,285 times.

      Reader Success Stories

      • George R.

        Mar 28, 2016

        "The use of vinegar and water to clean the wrought iron was a surprise. I will use it when I start my paint job."
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement