How to Program a Garage Door Opener

PDF download Download Article
PDF download Download Article

A garage door opener makes your life so much easier, but first you have to program the remote or keypad. Fortunately, most garage door openers manufactured after 1993 all use the same simple and easy process for programming or resetting garage door openers. [1] Even better, you can have your garage door opener working in less than 10 minutes! We're going to walk you through the process of programming or resetting a garage remote, a garage keypad, and your car's HomeLink garage opener.

Get Product Support Solve Any Problem

wH
Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!
*
*
Method 1
Method 1 of 3:

Programming a Handheld Garage Door Remote

PDF download Download Article
  1. Position your ladder just behind the garage door opener so you can easily access the back of it where the control panel is located. [2]
    • You may be able to use a small step-ladder for this if you’re tall. However, a 6 ft (1.8 m) ladder may be safer.
  2. At the back of your garage door opener, you’ll see a plastic piece that detaches. This is your rear flap or light cover, depending on the brand of garage door opener you have. [3] Here’s how to open it:
    • For a rear flap, press the tabs located on each side of the plastic flap at the same time. Then, gently pull it off to remove the control panel. [4]
    • If you have a light cover, gently pull it off of the garage door opener.
    Advertisement
  3. On many models, the button is labeled. However, it may just be a colored button. Next to the button, you’ll see a small LED light that will illuminate when the button is activated. Hold the learn button down until the LED light starts flashing. [5]
    • For instance, the “learn” button may be yellow or purple. However, it could be any color.
    • Some models call this button a “smart” button. [6]
  4. You have 30 seconds to push your remote button after the light starts flashing. Click the button once to establish a link with the garage door opener. Don’t hold the button down. [7]
    • If you miss the 30-second window, don’t worry. You can just press and hold the “learn” button again.
  5. On most models, the light bulb will flash when your remote is successfully programmed or reset. This just confirms that the process works. [8]
    • Some garage door openers don’t blink when the remote successfully connects.
  6. Push the button on your remote once to make sure your garage door opens. Then, press the button again to close the garage door. [9]
    • If your remote isn’t working, go through the programming process again. You might also change the battery in your remote.
    • If your remote still isn’t working, try changing the light bulb on your garage door opener. Some LED bulbs emit a frequency that interferes with garage door remotes and prevents them from working. [10]
    7. Advertisement
Method 2
Method 2 of 3:

Programming a Garage Door Keypad on Your Home

PDF download Download Article
  1. Pick a ladder that’s tall enough for you to safely reach the garage door opener. Put the ladder right behind your garage door opener so you can access the control panel. [11]
    • You may be able to use a step-ladder if you’re tall. However, it’s safest to go with a 6 ft (1.8 m) ladder.
  2. The back of your garage door opener will have a plastic piece that conceals the control panel and light bulb. To open a rear flap, push the release buttons on either side of the flap and pull it open. If you have a light cover, simply pull it off of the garage door opener. [12]
    • Behind the plastic flap or light cover, you’ll see several buttons and a light bulb.
  3. There is an LED light next to your “learn” button. Hold the button for about 6 seconds and watch for the light to go out. When it does, release the “learn” button. This will clear the link between your garage door opener and the keypad and remote. [13]
    • You’ll also have to reprogram your garage door remote if you have one. Follow the directions above in the section titled “Programming or Resetting a Remote.” It’s okay to do this after you program the keypad because reprogramming your garage door remote won’t clear the settings on your keypad.
  4. The LED light next to the “learn” button will come on when it’s ready to be programmed. You have 30 seconds to program your keypad after the LED comes on. [14]
    • Typically, the “learn” button is colored, so it may be purple, yellow, or another color. If you don’t see a label, look for a colored button.
    • If you don’t make it to the keypad in time, just press the “learn” button again.
  5. Use a new code that will be your official key code for opening and closing your garage door. If you enter it successfully, the light on your garage door opener will flash. This confirms the link is reset. [15]
    • If you don’t see the light flash, go ahead and test your keypad to see if it works. However, you may need to repeat the process all over again.
  6. The light bulb on your garage door will flash if you’ve entered the new code in time. If your garage door doesn’t have a light bulb, you may hear a click. This let’s you know your garage door opener is programmed. [16]
  7. After you type in the new code, press enter. Your garage door should open or close if you entered the code correctly. [17]
    • If your garage door doesn’t work, you may not have entered your new key code fast enough. Repeat the process and make sure you enter the code within the 30-second time window.
    • It’s a good idea to write down your keycode in the notes on your phone or on a scrap of paper just in case you have trouble remembering it at first.
    8. Advertisement
Method 3
Method 3 of 3:

Programming Your Car’s HomeLink Garage Door Opener

PDF download Download Article
  1. The buttons are usually located on the interior roof of your car near your rearview mirror and lights. They might also be on your rearview mirror or on the visor over your driver's seat. You should see 3 buttons in a row, with a little house emblem above them. [18]
    • Check your vehicle’s manual if you’re having trouble finding where the control buttons are located.
  2. This will activate your vehicle's learning mode so you can link your car to your garage door opener. Watch for the indicator light above the controls to light up. [19]
    • Only hold the button down for up to 30 seconds. If you hold it longer than this, it will reset your controls back to the default factory settings.
  3. The flashing light signifies that your system is in learning mode. You can now link your vehicle’s system to your garage door opener. [20]
  4. They need to be close to each other so they can link up. Use 1 hand to work your current garage door remote, and the other to push the control buttons on your car. [21]
  5. At first, the indicator light will still blink slowly. However, you should notice the light speeding up as the garage door remote and your car’s remote button link up. When the light is flashing quickly, you can let go of the buttons. [22]
    • You can use any of the 3 buttons on your car's Homelink control panel.
  6. Your garage door should open and close when you press the button in your car. However, some garage door openers may not link up this way. [23]
    • If this doesn’t work, you may need to set it from your garage door opener. Climb a ladder to access the rear of your garage door opener. Press the “learn” button near the light bulb. Within 30 seconds, press the garage door opener in your car 3 times to pair it. [24]
    • It can take 2 or 3 times to link a car garage door remote button to a garage door opener, so don’t feel discouraged if the process doesn’t work for you at first.
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • A power surge can wipe out your garage door opener’s memory. If it suddenly stops working, try reprogramming your remote or keypad. [25]
        Thanks
        Helpful 0 Not Helpful 0
      • Check your manufacturer’s instructions if you’re having trouble programming your garage door opener. While most models work the same, it’s possible your garage door opener could be different.
        Thanks
        Helpful 0 Not Helpful 0
      • Call a garage door specialist if you have trouble programming your garage door, as they’ll be able to help you find and fix any problems.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Lubricate a Garage Door
      How to
      Reprogram Your LiftMaster Garage Door Opener Motor
      How to
      Adjust a Garage Door Spring
      How to
      Reset Your Garage Door Keypad Without the Previous Code
      How to
      Open a Garage Door without Power
      How to
      Align Garage Door Sensors
      8 Effective Ways to Extend the Range of a Garage Door
      How to
      Disable a Garage Door Sensor
      How to
      Install a Garage Door Opener
      How to
      Replace the Rollers on a Garage Door
      5 Ways to Weather-Seal a Garage Door
      How to
      Install an Overhead Garage Door
      How to
      Replace a Garage Door
      How to
      Shut a Garage Door when the Sun Is Shining on the Electronic Eyes
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=1ppZUjn8XyY&t=14s
      2. ↑ https://www.thisoldhouse.com/garages/22225015/fix-a-garage-door-that-wont-close
      3. ↑ https://www.thisoldhouse.com/garages/22225015/fix-a-garage-door-that-wont-close
      4. ↑ https://www.youtube.com/watch?v=1ppZUjn8XyY&t=32s
      5. ↑ https://www.thisoldhouse.com/garages/22225015/fix-a-garage-door-that-wont-close
      6. ↑ https://www.youtube.com/watch?v=1ppZUjn8XyY&t=37s
      7. ↑ https://www.youtube.com/watch?v=1ppZUjn8XyY&t=92s
      8. ↑ https://www.youtube.com/watch?v=1ppZUjn8XyY&t=99s
      9. ↑ https://www.youtube.com/watch?v=1ppZUjn8XyY&t=119s
      1. ↑ https://www.youtube.com/watch?v=1ppZUjn8XyY&t=144s
      2. ↑ https://www.thisoldhouse.com/garages/22225015/fix-a-garage-door-that-wont-close
      3. ↑ https://www.thisoldhouse.com/garages/22225015/fix-a-garage-door-that-wont-close
      4. ↑ https://www.youtube.com/watch?v=6eqZts761e4&t=15s
      5. ↑ https://www.youtube.com/watch?v=6eqZts761e4&t=21s
      6. ↑ https://www.youtube.com/watch?v=AEUWlPKwIOA&t=93s
      7. ↑ https://www.youtube.com/watch?v=6eqZts761e4&t=29s
      8. ↑ https://www.youtube.com/watch?v=ee9jJvoknJo&t=136s
      9. ↑ https://www.youtube.com/watch?v=ZmOvGJCi0eY&t=17s
      10. ↑ https://www.youtube.com/watch?v=esHbZdJ-J9c&t=21s
      11. ↑ https://www.youtube.com/watch?v=ZmOvGJCi0eY&t=150s
      12. ↑ https://www.youtube.com/watch?v=esHbZdJ-J9c&t=49s
      13. ↑ https://www.youtube.com/watch?v=ZmOvGJCi0eY&t=233s
      14. ↑ https://www.youtube.com/watch?v=esHbZdJ-J9c&t=65s
      15. ↑ https://youtu.be/ZmOvGJCi0eY?t=292
      16. ↑ https://www.thisoldhouse.com/garages/22225015/fix-a-garage-door-that-wont-close

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 67,321 times.

      Did this article help you?

      Advertisement