How to Protect Aluminium

PDF download Download Article
PDF download Download Article

Aluminium is a widely used, lightweight and versatile material. It’s particularly common in car parts, and looks great when polished. If your boat or car has surfaces made of aluminium alloys, they can oxidise or corrode when exposed to water or air. There are several methods to protect aluminium from the elements. If you have a larger object made of aluminium alloy, painting or spraying on a clear coat will work best. Anodising (using electrolysis to protect the aluminium) will only work with purer aluminium and it's better to use it for smaller, portable objects.

Method 1
Method 1 of 3:

Painting or Spraying on a One-Part Clear Coat

PDF download Download Article
  1. You can use a power washer to clean the aluminium surface you wish to protect. You could also scrub it by hand. Make sure you get rid of chalk, dirt, grease or other contaminants. [1]
  2. Make a water solution of calcium carbonate or baking soda. You can then spray or rub it on the surface using a spray gun or cloth. [2]
    • This is especially important for surfaces which have previously been cleaned with an acid cleaner. This may react with the clear coating and cause black streaks.
    Advertisement
  3. Both should be available at a hardware store. [3]
    • Be careful not to use lacquer thinner. Lacquer thinner contains oils that can contaminate the surface.
  4. You can paint it on using a solvent-rated or natural brush, an applicator pad or a foam roller. You can also spray on the coating or dip an object in the coating. [4]
  5. If the clear coating starts to disintegrate, the aluminium can be re-coated. Make sure to clean off dirt and residue from the previous coating. Then you can reapply the coating by following the steps above. [5]
    6. Advertisement
Method 2
Method 2 of 3:

Spraying on a Two-Part Clear Coat

PDF download Download Article
  1. Use a power washer to clean the aluminium surface or scrub it by hand. Then spray or rub on a solution of calcium carbonate or baking soda to neutralise the surface and get it ready to coat. After you're finished, rub the surface down with xylene or denatured alcohol. [6] .
  2. Two-part clear coating (or epoxy) needs to be mixed with a hardener or other catalyst. Open the can and take out the two parts (A and B). Measure 3 parts of part B solution to one part of part A solution in separate clear plastic cups. [7]
  3. Mix the Part A and Part B solutions in a metal can. Then attach a spray head to the can to create a detail spray gun. [8]
  4. Spray a short burst 2-3 times in the air away from the aluminium object to see if the gun is working. [9]
  5. Spray the solution in short bursts along the length of the object you want to protect. Keep spraying until the surface appears glossy and wet. [10]
    • Don’t bring naked flames anywhere near the area you are spraying in.
    • Make sure to not apply too much solution as this may run and dry in streaks.
  6. Let the coated aluminium dry for 24 hours. [11]
    • If a further coat is necessary, you can repeat these steps after 24 hrs.
    7. Advertisement


Method 3
Method 3 of 3:

Protecting Pure Aluminium Objects by Anodising

PDF download Download Article
  1. Scrub it completely clean of all marks using hot soapy water. [12]
    • The aluminium object cannot have any marks on it, even a fingerprint, as any marks will be permanently anodized  onto the metal.
  2. Mix a solution of 5 grams (0.18 oz) of caustic soda to 1 cup (240 mL) of water. Allow the object to soak in the caustic soda for 2-4 minutes until metal looks milky. [13]
  3. Get a small rectangular plastic container and put it inside a larger plastic tub. This will help protect your work surface from any spills. [14]
  4. You can use pieces of lead flashing as cathodes (objects through which a negative current runs). The cathodes need to have a surface area at least twice the size of the aluminium objects that you want to anodise. [15]
    • Lead flashing is commonly used to protect roofs and you can buy it online or at a hardware store.
    • Hang the lead cathodes over the edges of the tank using anodising jigs (hooks for the edges of the tank). These can be bought at a hardware store or online or you can make them out of titanium wire.
  5. If possible, you should use a variable-voltage desktop power supply. Use a current of at least 0.145 milliamps per square inch (6.45 square cm) of the aluminium object’s surface area. [16]
    • If you don’t have a variable-voltage power supply, use a fixed-voltage power supply with a voltage appropriate to the object being anodised.
  6. Ammeters check and control voltage and you can buy them online or from a hardware store. [17]
  7. Electrolyte is the liquid which will sit in the anodising tank and which will cover the object being protected. The amount you need depends on the size of your tank and the size of the object you want to protect. Use a solution of car battery acid diluted with water in a 1-1 ratio. Place the water in the inner plastic tank and slowly pour the acid into the water. [18]
    • The electrolyte may heat up when the acid and water mix, so you should leave the electrolyte to cool for at least 18 hours.
  8. An aluminium wire hook may corrode during the anodising process. Drive the hook through a block of wood large enough to sit on top of the tank. [19]
  9. Connect the power supply’s negative lead and the ammeter’s negative lead to the lead cathodes. Connect the ammeter’s positive lead to the aluminium object (the anode). [20]
  10. Make sure that the aluminium object does not touch the cathodes as this may short them out. Turn on the current. [21]
    • Watch for bubbles rising from the aluminium object. This shows that the anodising process is happening properly.
  11. Take the object out of the electrolyte and place it in a tub of ionized  water overnight so that the acid can wash off. Ionized  water can be created by running tap water through a water ioniser (available online). [22]
    12. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can you prevent polished aluminum from tarnishing?
    Cleanzen Cleaning Services
    Residential Cleaning Specialists
    Cleanzen Cleaning Services is an organization consisting of Residential Cleaning Specialists based in Boston, MA. The Cleanzen Cleaning Services Team consists of Residential Cleaning Specialists. With more than six years of experience, they specialize in connecting independent cleaning professionals with those who need help cleaning their houses. All of Cleanzen’s professionals are experienced and licensed and have passed background checks.
    Cleanzen Cleaning Services
    Residential Cleaning Specialists
    Expert Answer
    Polished aluminum is prone to tarnishing because of oxidation. To prevent oxidation and corrosion, apply a special anodic coating material. These are available at local hardware and home improvement stores in the paints and coatings section.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    What do you use to clean and protect anodized aluminum?
    Cleanzen Cleaning Services
    Residential Cleaning Specialists
    Cleanzen Cleaning Services is an organization consisting of Residential Cleaning Specialists based in Boston, MA. The Cleanzen Cleaning Services Team consists of Residential Cleaning Specialists. With more than six years of experience, they specialize in connecting independent cleaning professionals with those who need help cleaning their houses. All of Cleanzen’s professionals are experienced and licensed and have passed background checks.
    Cleanzen Cleaning Services
    Residential Cleaning Specialists
    Expert Answer
    Anodized aluminum should be cleaned with a gentle substance, such as a mixture of dishwashing soap and water. Scrub the anodized aluminum with an abrasive sponge and rinse thoroughly. To protect the anodized aluminum after it is clean, apply an anodic coating product that may be purchased from a paint or hardware store.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    How do you clean and polish vintage hammered aluminum décor?
    Cleanzen Cleaning Services
    Residential Cleaning Specialists
    Cleanzen Cleaning Services is an organization consisting of Residential Cleaning Specialists based in Boston, MA. The Cleanzen Cleaning Services Team consists of Residential Cleaning Specialists. With more than six years of experience, they specialize in connecting independent cleaning professionals with those who need help cleaning their houses. All of Cleanzen’s professionals are experienced and licensed and have passed background checks.
    Cleanzen Cleaning Services
    Residential Cleaning Specialists
    Expert Answer
    Hammered aluminum should be cleaned with dishwashing liquid, water and a sponge. Lemon juice may be used on tough stains. After rinsing and drying the material, use pewter polish to polish and protect the hammered aluminum.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Repair scratches in coated surfaces that expose the metal, as these can allow corrosion or oxidation.
        Thanks
        Helpful 0 Not Helpful 0
      • Remember to clear out a spray gun after use.
        Thanks
        Helpful 0 Not Helpful 0
      • When making calculations about the area of the object you want to anodise, make sure to include the inside of the object if it is not watertight.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Use caustic soda only in well-ventilated areas or outdoors to disperse harmful fumes.
        Thanks
        Helpful 1 Not Helpful 0
      • Anodizing  is a difficult process that requires a good knowledge of chemistry. A one-part coat is the easiest and cheapest method for most aluminium surfaces on cars and boats.
        Thanks
        Helpful 1 Not Helpful 0
      • Only conduct the anodising process in a well-ventilated area, preferably with an extractor hood, since the electrolyte fumes are caustic.
        Thanks
        Helpful 1 Not Helpful 0
      • Neutralise any surface cleaned with an acid cleaner before applying a clear coat. The acid may react with clear-coating and cause black streaks.
        Thanks
        Helpful 0 Not Helpful 0
      • Always use a respirator if using a spray gun.
        Thanks
        Helpful 0 Not Helpful 0
      • Keep naked flames away from areas where a spray gun has recently been used.
        Thanks
        Helpful 0 Not Helpful 0
      • Make sure to use gloves and goggles when using acid.
        Thanks
        Helpful 0 Not Helpful 0
      • Always add acid to water. Adding water to acid may cause a violent reaction or splash the acid on skin or clothing.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Anodize Aluminum
      How to
      Solder Aluminum
      How to
      Cut Aluminum
      How to
      Polish Scratches Out of Aluminum
      How to
      Weld Aluminum
      How to
      Melt Aluminum
      How to
      Melt Aluminum Cans
      How to
      Prime & Paint Aluminum Surfaces
      How to
      Age Aluminum
      How to
      Braze Aluminum
      How to
      Acid Wash Aluminum
      How to
      Polish Aluminum
      How to
      Keep Polished Aluminum Shiny
      How to
      Remove Rust from Aluminum
      Advertisement

      References

      1. ↑ https://www.everbritecoatings.com/faq.html#applied
      2. ↑ https://www.finishing.com/216/93.shtml
      3. ↑ https://www.finishing.com/216/93.shtml
      4. ↑ https://www.finishing.com/216/93.shtml
      5. ↑ https://www.finishing.com/216/93.shtml
      6. ↑ https://www.finishing.com/216/93.shtml
      7. ↑ https://www.eastwood.com/1k-coating-vs-2k-coatings
      8. ↑ https://www.youtube.com/watch?v=WhmD7DGahcA
      9. ↑ https://www.youtube.com/watch?v=WhmD7DGahcA
      1. ↑ https://www.youtube.com/watch?v=WhmD7DGahcA
      2. ↑ https://www.youtube.com/watch?v=WhmD7DGahcA
      3. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      4. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      5. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      6. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      7. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      8. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      9. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      10. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      11. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      12. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo
      13. ↑ https://www.youtube.com/watch?v=GccTVfMiIIo

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 47,870 times.

      Did this article help you?

      Advertisement