How to Pull a Deep Well Submersible Pump

PDF download Download Article
PDF download Download Article

When your deep well pump stops working, who ya gonna call? The local well driller can pull it for you, but that could cost big bucks. If your pump is less than 100 feet (30 m) down, you can probably pull it up by hand with some help from a friend. If it’s further down than that, you may need a pump pull machine to help you out. Set aside a few hours in your day to pull out your pump and get to fixing whatever the problem is on your own.

Method 1
Method 1 of 3:

Understanding Your Deep Well Pump

PDF download Download Article
  1. A submersible pump is a water pump that has to be submerged underwater to work. A deep well submersible pump is one that’s deep underwater, meaning the water has longer to travel. Usually, deep well pumps are situated so low because the water table is low. [1]
    • Although they are sometimes conflated, sump pumps are different from deep well submersible pumps. Sump pumps collect water from the sump basin, usually in the basement of a home.
  2. There are a number of reasons why your submersible pump might have stopped working, so it’s important to count out the easy fixes first. Check the wall switch to make sure it hasn’t been turned off first, then check the breaker to see if it’s been flipped. If neither of those things work, check the pressure switch on the pump itself. [2]
    • If the breaker or the pressure switch is the problem, you may have to call in a professional.
    Advertisement
  3. Usually, submersible well pumps sit between 50 and 300 feet (15 and 91 m) below the ground. If your well is 100 feet (30 m) deep, the pump usually weighs around 100 pounds (45 kg). Deeper wells can have pumps that weigh up to 300 pounds (140 kg). If your pump is too heavy to lift by hand, you’ll need a truck with a crane to help you out.
    • If you aren’t sure how deep your well is, get your property records from your local building department.
    • You can absolutely pull your pump out by yourself; however, it is tough work, and you can damage the pump in the process. If you’re at all nervous about the prospect of pulling up your pump or you don’t have the right equipment for it, call a professional.
    4. Advertisement
Method 2
Method 2 of 3:

Pulling a Deep Well Pump by Hand

PDF download Download Article
  1. Always shut off the breaker to the pump before you start. Then, clear a 10 feet (3.0 m) radius around the opening of the well to make sure you don’t get caught in any vegetation or debris. Put on some non-slip gloves and safety glasses to protect yourself throughout the process. [3]
    • It is very important to turn off the breaker before you start messing with the pump. If you don’t, you could seriously injure yourself.
  2. To open up the pump area, use a 3 ⁄ 4  in (1.9 cm) socket and ratchet to take off the nuts on top of the casing. Then, slide a flathead screwdriver underneath the cap to slowly pry it off of the casing and open it up. [4]
    • You might meet some resistance here, especially if you haven’t opened up your well cap in a while (or ever).
  3. Shine a flashlight into the well and look for the pipe with a T-fitting. Slide the end of the T-handle pump tool into the well and turn it clockwise into the pipe to thread it in. Make sure it’s secure before you move on, since this is what you’ll be using to pull up your pump. [5]
    • If you’re having trouble interesting the T-handle tool (which is common, since the pipe may be corroded), try lining it up as best you can and then gently tapping on the top of the tool with a hammer. The slight pressure can help guide the tool onto the pipe to make for an easier job.
  4. This step is really important, since a safety rope is all that stands between you and accidentally dropping your pump into the abyss. Grab a rope that’s at least 3 ⁄ 4 inch (1.9 cm) thick and tie it in a tight knot around the water pipe itself, just below the T-handle tool connection. Leave the rope sticking out of the well cap so you can easily grab it if you need to. [6]
    • If you do drop the pump once you disconnect it from the well line, it will take a whole lot of time and money to get it back.
  5. Here comes the sweaty part of the job. Have one person pull on the T-handle tool while another person holds the safety rope. Start walking backwards as you pull to remove the pipe and the pump at the bottom. [7]
    • This can take a long time, and it takes a lot of work. Feel free to switch out with your friend so you can take turns pulling the pump.
    • Focus on keeping the pipe untwisted as you pull upwards so you don’t rip or tear it.
    • Once you have the pump completely out of the ground, you can take a look at the mechanism itself and diagnose it.
    6. Advertisement
Method 3
Method 3 of 3:

Pulling a Deep Well Pump by Machine

PDF download Download Article
  1. Shut off the breaker to the pump before you start working. Put on non-slip gloves, work boots, thick pants, and safety glasses, then clear a 10 feet (3.0 m) radius around your work area to stay safe. Remove any large rocks or shrubbery that might get in your way.
    • Make sure the machine or vehicle you’re using has a clear pathway to get to the well cap and back.
  2. Use a wrench to loosen the nuts and the bolts on the well cap, then take them off completely. Slide a screwdriver in between the cap and the well, then pry it open gently and set the cap aside.
    • You’ll need the well cap later when you put your pump back, so don’t lose track of it.
  3. Pump pull machines are hydraulic machines that work by grabbing the top of the pump pipe and pulling it upwards. Once you have your machine out and ready, remove the top part that attaches to the top of the pipe and set it on top of the well cap opening. Leave the rest of the machine nearby so you can hook it up in just a moment. [8]
    • You can rent pump pull machines at most hardware stores, or you can buy one for around $200.
    • There are also pulley system pull pump machines, which are slightly less expensive but don’t have the pulling power of a hydraulic machine.
  4. With the top of the machine sitting on top of the well cap opening, thread it 360 degrees in a clockwise motion to attach it to the top of the water pipe. If you need some guidance, shine a flashlight down into the well as you do this so you can see a little better. [9]
    • Some machines may allow you to turn both clockwise and counterclockwise to thread them into the pipe, especially if they’re newer models.
    • If you’re using a pulley system, hook the winch to the top of the water pipe.
  5. If you’re using a hydraulic machine, grab the nozzles that connect to the base and attach them to the top of the machine by twisting them in. Usually, there will be 2 to 3 hoses that connect to the base for an easy hookup. [10]
    • If you’re using a pulley system, you’ll have to attach the line to another surface that’s about 2 feet (0.61 m) away from the well cap, like a tow hitch or a sturdy branch. [11]
  6. Flick the machine to the “on” position and watch the rubber wheels turn! As the water pipe comes out of the well, grab it and walk it backwards or in a circle to make sure it doesn’t get tangled. Once the actual pump itself comes out of the ground, you can turn the machine off. [12]
    • This will go much faster than pulling by hand, but it could still take up to 15 minutes.
    • If you’re using a pulley system, you will have to detach and reattach the winch to another part of the water pipe every time the pulley runs out of slack. Keep doing this over and over until the pump comes out of the ground. [13]
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What are the pros and cons of submersible vs. deep well water pumps?
    Community Answer
    The use of one over the other is determined by the height the water that needs to be lifted.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 7
  • Question
    How do I pull a submersible motor?
    Community Answer
    First, you will need a puller. This is a peace of pipe 6 feet long, threaded on one end. On the top, weld a piece of pipe 16-24 inches long to make a puller that looks like a long legged T. Open your well by removing the well cap. With a flashlight attached to your hand, look down the inside and find the pitless adapter. Thread the puller into the top of the adapter. Take a hammer and tap firmly down. Then tap the underside of the T handles (both sides). Lift the puller and pull your pump out. You'll need the help of at least two more people.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 7
  • Question
    How does water get from the pressure tank into my house?
    Community Answer
    The water from the well enters the pressure tank through a T-fitting. The water can go either into the tank or to the faucet. When you turn the faucet off, the water will continue to go into the tank until the pressure switch turns off the pump. When you open a faucet, the water reserved in the tank will flow until the pressure falls to the point where the pressure switch turns the pump on.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 4
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • When you’re pulling the pump by hand, always have a buddy nearby in case you need help.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always wear close-toed shoes, thick clothing, and non-slip gloves when working on a deep well pump.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      Pulling a Deep Well Pump by Hand

      • Non-slip gloves
      • Safety glasses
      • Wrench
      • Ratchet
      • Screwdriver
      • T-handle tool
      • Rope

      Pulling a Deep Well Pump by Machine

      • Non-slip gloves
      • Safety glasses
      • Work boots
      • Pull pump machine (pulley or hydraulic)

      You Might Also Like

      How to
      Drill a Well
      How to
      Make a Well
      How to
      Build a Dry Well
      How to
      Chlorinate a Well
      How to
      Change a Well Water Filter
      How to
      Replace a Well Pump
      How to
      Build a Stream
      How to
      Make a Water Wheel
      How to
      Build a Waterfall
      How to
      Make a Wishing Well
      How to
      Dam a River
      How to
      Build a Water Hand Pump
      How to
      Get Rid of Algae in Ponds
      How to
      Keep Algae from Growing in Bird Bath
      Advertisement

      References

      1. ↑ https://baileylineroad.com/the-right-way-to-install-a-submersible-pump-in-your-water-well/
      2. ↑ https://www.youtube.com/watch?v=CWqsjc4phm8&feature=youtu.be&t=19
      3. ↑ https://homesteady.com/how-12119388-pull-pvc-deep-well-pipe.html
      4. ↑ https://homesteady.com/how-12119388-pull-pvc-deep-well-pipe.html
      5. ↑ https://www.instructables.com/id/How-to-Replace-a-Submerged-Well-Pump/
      6. ↑ https://baileylineroad.com/the-right-way-to-install-a-submersible-pump-in-your-water-well/
      7. ↑ https://homesteady.com/how-12119388-pull-pvc-deep-well-pipe.html
      8. ↑ https://www.youtube.com/watch?v=mxh4LpkomXw&feature=youtu.be&t=102
      9. ↑ https://www.youtube.com/watch?v=mxh4LpkomXw&feature=youtu.be&t=108
      1. ↑ https://www.youtube.com/watch?v=mxh4LpkomXw&feature=youtu.be&t=117
      2. ↑ https://www.youtube.com/watch?v=Nhqc1ipXtmg&feature=youtu.be&t=507
      3. ↑ https://www.youtube.com/watch?v=mxh4LpkomXw&feature=youtu.be&t=271
      4. ↑ https://www.youtube.com/watch?v=Nhqc1ipXtmg&feature=youtu.be&t=501

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 274,153 times.

      Reader Success Stories

      • Derek J.

        May 18

        "We haven't performed the pump pulling yet! But this has already help a bunch! I offered to help my neighbor ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement