Q&A for How to Hang a Picture

Yes, it generally should. You want to make sure that the picture is at the right height, but more importantly, use the molding as a reference so that the picture is not crooked.

There's no exact answer to this. It depends on the length of the wire you use. You can position the screws near the top or closer to the middle, placed on the sides of the back of the frame. The key is this: decide whether or not you want the wires to show above the frame (they're usually not visible). Put the screws in place on the frame, measure how much wire you need, allow for some stretch, then fasten the wire to the frame.

This is subjective to your taste but most people opt for about eye level.

That depends on your decorating style. Those that like traditional/transitional style decorating choose to hang their picture centered on the wall with balance on each side, matching or coordinating (symmetrical). For those that like modern, eclectic decorating tend to off set the main piece, non-matching or non-coordinating with off-balance pieces on the sides (asymmetrical).

Try using the 3M Command Strips. They are easy to use and won't damage your walls.

You will need to go to your local hardware store and look for concrete screws. Use these just like nails and hang up your photo as usual.

I personally suggest using some Artistic Wire (which you can get from your local craftstore), and either tie it, or put it through.

Purchase a stud finder. They are available at your local hardware store, or from an online retailer like Amazon, eBay, etc.

If you're drilling a screw into the wall, choose a bit that's as large as the screw itself. If you're pre-drilling a hole into the wall for an anchor, choose a bit that's 1/64" larger than the anchor.