How to Know if You Are Ready for a Relationship
Q&A for How to Make a Bow and Arrow
Coming soon
Search
-
QuestionWhat should be the thickness of the bow?Community AnswerYou should aim for around an inch. Don't go too thick because you want it to have a slight bend, but if it's too thin it will snap. Woodlands are great for finding a good bow.
-
QuestionWhy do I have to heat up the stick?Community AnswerIf you mean the arrow, it's to harden the point of the entire thing. If you mean the bow, it's the same principle, it's to make it harder and more durable.
-
QuestionWhat else can be used for fletching?Community AnswerDuct tape, animal furs, feathers, even streamers could be used.
-
QuestionHow bendy do you need it: Super bendy, quite bendy or a little bendy?Community AnswerQuite bendy. Not super bendy, or there won't be as much power to it. However, being too stiff makes it more likely to break if you try to shoot an arrow from it.
-
QuestionAbout how far does this bow actually shoot? Also, what do you think the drawback weight is?Community AnswerIt would be roughly 30-55 pounds depending on how you make it. Likely it shoots anywhere from 100 yards to 600 yards, depending on how you make it.
-
QuestionCan anyone give a few more examples of the types of wood that could be used?Community AnswerRed oak, bamboo, hickory, Osage, ipe, cedar, poplar, black locust, yew, and black walnut. All these work well for making bows, but it really comes down to what you think looks the best.
-
QuestionWhat can I use in place of a knife?Community AnswerObsiderine is usually sharp enough.The right piece may be as sharp as a razor blade. Use the blunt side as a handle and scrape the wood with the sharp end.
-
QuestionWhy is it so important to not have a slack bow?Community AnswerBecause that means there isn't a lot of resistance, and you need some resistance for an effective shot.
-
QuestionHow long does the string have to be?Community AnswerIt needs to be about 4 inches (20cm) from the top when tied to the bottom. That way, it keeps the bow and string taut.
-
QuestionCan I use baker's twine?Community AnswerBaker's twine is more focused on crafting, and is only a little thicker than floss. Use something else.
-
QuestionI already have a bow, but I need to replace the string. It's an older bow that looked like it had cotton string. What string should I use and where can I get it?Community AnswerMeasure the original string length then place two nails in a length of wood this distance apart. Use dental floss to wind between the nails until you reach desired thickness (maybe 10 to twelve strands). Bind the ends with dental floss to form eyes at both ends, then bind a section in the middle for the arrow nock.
-
QuestionDoes the bow have to be that long?Community AnswerNot at all. 1.8 meters is the length of a longbow. Smaller bows, often used in history on horseback, are usually about 3.5 feet long.
-
QuestionWhat is the strongest string to use for the bow?Community AnswerStrings made out of flax, hemp, or silk are among the strongest strings. They have are used on the English longbow, which is one of history's strongest bows.
-
QuestionHow do I make the tip for the arrow?Community AnswerYou can make it with metal, glass, or bone. You will have to mold the shape into a triangle with a small length to attach to the arrow-head, or you can ask a blacksmith to make you a few sets of them to attach to arrow shafts.
-
QuestionCan I use a shoelace for the bow string?Community AnswerYou could, but try juta cord or para cord for a better choice.
-
QuestionHow do I keep the arrow on the bow without slipping?Community AnswerMake a small cut into the feathered end of the arrow, about 1/2 cm or so deep. This will allow the arrow to slip into the string.
-
QuestionWhat do you if there is no stone, bone, or metal nearby to make the arrowhead with?Community AnswerYou can try making an arrowhead out of a stick by sharpening the end of it.
-
QuestionWhere do I find a good, straight stick?Community AnswerA good, straight stick can be found anywhere. You may find some good sticks in the woods or forest. Just look anywhere that has a tree nearby.
-
QuestionHow do you get feathers?Community AnswerFeathers can be found on the ground, or you can buy them.
-
QuestionWhat if we don't have these things?Community AnswerThese can all be found in nature except maybe the yarn. You should be able to find these.
-
QuestionCan I use mahogany wood? Also, where can I find yew? I'm in a tropical country.Community AnswerI'm not sure about mahogany. Yew is indigenous to Europe, from what I know.
-
QuestionHow long does the arrow need to be?Community AnswerIt should be about 3 feet long but if your draw back length is longer when you draw the arrow back it should be about an inch from the tip of the arrow.
-
QuestionCan I use two or three woods glued together?Community AnswerMaybe, but gluing could make it less durable, and then you're relying more on the glue than on the wood and your own skill.
-
QuestionHow do I cut the notch for the arrow head?Community Answerjust slit a hole on the top, where it fits into the bowstring, and wrap some binding material onto the wood and arrow head.
-
QuestionWhat other types of string or wire would work that is cheap?Community AnswerFishing string is cheap, but I would recommend braided nylon or cotton/silk.
-
QuestionCan I use yarn for the bow string?Community AnswerNo, you can't. Yarn isn't strong enough and would come apart very quickly.
-
QuestionCan I use metal string?Community AnswerMetal string is fine, and it is a preference to some. You can use it but you need it to be a metal string, not wire, and they are not to be mistaken for one another. Until your fingers get used to it they will bleed from continuous use, so make sure you wrap the middle of the strand with something more finger friendly!
-
QuestionWhat wood can I use that is native in Europe?Community AnswerYew and wych elm (or Scott's elm) are in Europe, and historically used to make longbows.
-
QuestionCan I use a non-adhesive bandage for the bowstring? Could a knife be used in place of an arrow?Community AnswerA bandage doesn't have enough tensile strength to propel an arrow. A knife wouldn't work because it's not aerodynamically designed to be shot from a bow and doesn't have enough length to be pulled back; however, in an emergency situation, you could fashion an arrow using a knife's blade, if it's small enough, and some sort of shaft. You'd still need something better than a bandage to use as a bowstring, though.
-
QuestionHow do I make the nocks in the back of the arrow?Community AnswerTo make the nocks, use a knife to divide the top of the arrow into thirds. Cut out the middle third.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit