Q&A for How to Remove Sticker Residue

Depending on where the residue is on the book, you probably want to start out with the gentlest option possible. Try to lightly scrub with warm soapy water, and add in some vinegar if more power is needed. Rubbing alcohol can also be used. It would probably be best to stay away from really strong chemicals like the commercial adhesive remover Goo-Gone or acetone.

There are many methods to try to remove sticker residue on plastic. A safe and all-natural way to start with is to mix vinegar and soapy water and submerge the plastic in the mix if possible. Let it sit for 30 minutes, then rub and scrub away the residue. You can apply more vinegar or solution mixture if there is still residue left over. Other ways include using rubbing alcohol, cooking oil, or peanut butter.

Using a cooking oil spray, an oil and baking soda paste, or a product like Goo Gone should help you remove the sticker residue on your white board.

Any of the above options mentioned in the article should help you remove your sticker residue from a magnet: baking soda and oil paste, Goo Gone, soapy water and vinegar, etc.

You can use almost anything on glass besides a metal scraper. Try soapy water or vinegar first, then move on to stronger chemicals like acetone, rubbing alcohol, or oil if needed.

Scrape off what you can and then wipe the squash with a cloth soaked in soapy water or vinegar. Don't use any stronger chemicals to avoid accidentally consuming them.

Soak a cotton ball in rubbing alcohol and rub away as much of the residue as you can. Then, wash the garment with laundry detergent like normal.

Scrape off as much as you can with your fingers or a plastic scraper, then try washing the residue away with hot, soapy water. If that doesn't work, try something stronger like vinegar.

Try a strong solvent like rubbing alcohol, vinegar, or acetone. They're strong enough to dissolve the adhesive residue without damaging the glass. Hot, soapy water may work too.

Nail polish remover works great on electronics. Just make sure to wipe off the residue quickly and change the Q-tip frequently to avoid residue buildup. Also, don't use too much liquid.

Oil or acetone will dissolve the glue, but rubbing alcohol or even dish soap will also help after a short soak.

If it's on the metal or plastic part, I've had good results with vegetable or canola oil. Apply a light coat (so it doesn't run or drip), let it sit overnight, and then just rub it off. If some won't come off, apply more oil and let it sit until it does.

Acetone will dissolve the glue without staining. Let sit for about a minute, and then wipe off. Other items that will help remove glue include: Petroleum jelly (like Vaseline), dish soap (though this may damage some finishes), and oils (like cooking spray, baby oil, or vegetable oil, though these may stain the finish).

Acetone will dissolve the glue without staining. Let it sit for about a minute, and then wipe off. Other items that will help remove glue include: Petroleum jelly (like Vaseline), dish soap (though this may damage some finishes), and oils (like cooking spray, baby oil, or vegetable oil, though these may stain the finish).

Sticker residue will break down with oil. Try soaking a cotton ball with baby oil, and then gently rubbing the sticky patch. Wipe off any residual baby oil with a clean cotton ball.

First, soak the bottle in hot water and vinegar for as long as possible (you can experiment with other detergents as well). Next, wash and scrub the bottle, and repeat as needed.

You might have some success with toothpaste or car body scratch remover. Leave it on for a few minutes and then gently wipe it away with a wet cloth.

You can use a special medical adhesive remover. You can also try some oil-based makeup remover or cooking oil. Lastly, you can also try spirit gum remover; you can find it at a store that sells theatrical make up supplies.

Well, there are several ways to remove a Band Aid . To start, grab one end and pull it off quickly, leaving it to sting for a few seconds. Or, you can pull it off slowly, which might give you more pain and leave marks.

Use some acetone or cooking oil and leave it overnight. Then scrape it off gently.

You'll want to treat the area directly with detergent before putting it through the washing machine. Make sure to follow the manufacturer's instructions. Avoid putting clothes through the dryer until the residue is completely removed.

Use the masking tape method for plastic, it works best (and quickest, plus your card stays dry).

Wet the label with water, and then use a sharp object, like a knife or scissors, to scrape it off.

Try using a sharp razor to peel off a thin layer of paper underneath the residue.

Use hand sanitizer and q-tips. Dab some hand sanitizer on a q-tip and rub lightly until the stickers begin to come off.

You can try using nail polish remover. It works fairly well. Another option is throwing the shoes in the wash. The laundry detergent might wash it away, or make it easier for you to wipe away.