Q&A for How to Set Up Your Nintendo Wii

Return to Full Article

Search
Add New Question
  • Question
    What do I do if there is no sensor, and the cursor doesn't work?
    Community Answer
    If there is no sensor bar, the cursor will not work. You need to set up your sensor bar.
  • Question
    How do I connect a Wii Board to my Wii?
    Community Answer
    The Wii balance board connects just like a Wii remote. Insert its batteries, press the power button on the board, and it should connect as Wii remote 4. The first time you connect it, you may need to hold the small red reset buttons (one in the board's battery compartment, the other behind the Wii's SD card slot cover) simultaneously.
  • Question
    How do I download the Wii Mii channel to play games?
    Community Answer
    The Mii channel comes preloaded on every Wii. It is not used to play games; it is merely where you create characters, "miis" that can be used in many games.
  • Question
    I don't see a yellow plug-in for the Wii cables on the back of my TV. Any suggestions?
    Community Answer
    The bank of plug-ins may be hidden behind a trap door on the back of your TV.
  • Question
    How do I search for a game in the Wii Shop?
    Abbey M.
    Community Answer
    Go to the Wii Shop Channel, then you select Start Shopping, then Virtual Console for older games or WiiWare for newer, more advanced gameplay experiences. Browse with a filter of your choice.
  • Question
    When I apply names and faces to the people in the games, does that stay on the disk or in the Wii unit?
    Community Answer
    It depends on what people you are using. If "people" are mii's (created in Mii channel) they will stay in the console. If they are created inside a game, they will stay in that game where they been created.
  • Question
    How do you connect peripherals to a Wii?
    Community Answer
    Peripherals such as keyboards can be connected using the two USB ports on the back of the console. GameCube controllers can be plugged into the ports on top of the Wii.
  • Question
    What do I do if my system says it can't read the disc?
    Community Answer
    Check the disk for dirt. If it is dirty, clean the disk with a dry soft cloth. If the game is scratched, try replacing the game. If you still cannot get the Wii to play the game, go to a local video game store and ask if they can clean the laser lens for you. If all else fails, contact Nintendo for repairs.
  • Question
    How can I keep the hand cursor from disappearing?
    Community Answer
    Make sure your sensor bar is in an unobstructed location -- either directly above or below your TV. Point the Wii remote at the screen at an optimal distance (3 to 10 feet from the TV).
  • Question
    Why, when I try to access the game, does it tell me to add motion sensor plus to my hand set, and why won't it let me bypass that page in setup?
    Abbey M.
    Community Answer
    Your game requires Wii MotionPlus, a separate accessory for older Wii Remotes. Newer remotes have this feature built-in. You can tell by the text on new Wii Remotes under the LEDs reading "Wii MotionPlus INSIDE." You will not be able to play that game without Wii MotionPlus.
  • Question
    What do I do if my system says that it can't read the disc?
    Sushi_mike
    Community Answer
    Eject the disc and see if it's dirty. Clean it. Restart the Wii console and insert the disc again. If that doesn't work, go to a local gaming shop and ask them what to do.
  • Question
    How do I set up players' names and colors for each controller
    OC_VORTEKS
    Community Answer
    The Wii automatically has different colors for each cursor, and you can create a Mii for each player.
  • Question
    How do I select from the disk?
    OC_VORTEKS
    Community Answer
    On the top-left corner icon of the Wii menu, there is a picture of your game. Press that. Open and press Start.
  • Question
    What setting does my television have to be on to play my Wii?
    Community Answer
    Your TV must be set to an AV input such as Component, AUX, Game, or Line 1. If you purchased a Component cable, set your Wii to Component, and set the resolution to 480p in Wii options.
  • Question
    I keep turning my TV to different channels, but there never is a Wii menu. It's just the regular TV stations. What do I do?
    OC_VORTEKS
    Community Answer
    You need to change your TV input, not channel. On your remote, there should be an input button, press that, and select your Wii input.
  • Question
    When I put a disc in, a message comes up saying the game can't be read. I'm putting the disc in the right way, what do I do?
    OC_VORTEKS
    Community Answer
    Make sure the game disc has no smudges or scratches. If it is smudged, clean it with glasses cleaner. If it is scratched, you can't fix it.
  • Question
    Can I play Wii on a monitor?
    OC_VORTEKS
    Community Answer
    Yes, if the monitor that you want to use has an A/V (audio video) port you can.
  • Question
    I hear the game, but can't see a picture. What can I do?
    OC_VORTEKS
    Community Answer
    Check that the video cord is plugged in properly and that the TV works correctly.
  • Question
    Is the censor bar meant to have a light?
    OC_VORTEKS
    Community Answer
    Technically yes, but that light is only for the wiimote and isn't visible to the human eye.
  • Question
    What if I'm not getting any color?
    Community Answer
    Check your connections and your breakers for dust, debris, etc. Also, plug something else in to test the outlet.
  • Question
    How much does a Wii remote and sensor cost?
    OC_VORTEKS
    Community Answer
    It generally depends where you buy them from. A Wiimote usually costs $60 and a sensor bar usually costs about $12 (CAD).
  • Question
    We have just set up our WiFi and want to play the Mario Kart game. It works fine for one player, but says there is an error code of no Internet connection when we try to set up for two players. What can I do?
    Community Answer
    Nintendo disconnected the Wii from the Internet. If you really want to go online, though, there are third-party programs that will allow you to do so.
  • Question
    How do I connect a Wii and DVD player at the same time?
    Stephen
    Community Answer
    If your TV does not have 2 AV jack groups, then you'll need to connect the DVD player to a different port. If you can't, then you cannot have both the DVD player and the Wii connected.
  • Question
    How do I set up Pure Flix on my Wii ?
    OC_VORTEKS
    Community Answer
    You can't. You cannot download programs that are not designed for the Wii. If you can use it online, it will most likely need Adobe Flash Player, which the Wii doesn't have.
  • Question
    When I press A, nothing happens on the TV. What do I do?
    Stephen
    Community Answer
    Your Wii may not be connected properly. Make sure you're on the right input on your TV.
  • Question
    What if the arrow is not moving?
    Community Answer
    Make sure your sensor bar is plugged in, and make sure the Wiimote is synced. If it is, then try restarting the console.
  • Question
    Will the unit work without the memory cards?
    OC_VORTEKS
    Community Answer
    Yes, the memory/SD cards are just for storing data you want to move/backup.
  • Question
    Do I need a disc for tennis, bowling, etc.?
    OC_VORTEKS
    Community Answer
    Yes, unless you want to buy it from the Wii shop channel or homebrew your Wii.
  • Question
    Why isn't the hand cursor showing up?
    OC_VORTEKS
    Community Answer
    Either the sensor bar hasn't been set up properly, there is something obstructing the Wiimote, or the Wiimote is dead.
  • Question
    What channel should my TV be on to start Wii?
    OC_VORTEKS
    Community Answer
    It depends which input you plugged it into. If A/V is an option, try that. If you don't have an A/V selection, go by trial and error.
Ask a Question

      Return to Full Article