How to Raise a Headboard

PDF download Download Article
PDF download Download Article

Back in the old days, headboards were a way to keep beds warm — otherwise, cold air from nearby walls would flow right on in. [1] Today, they’re mostly a way to make your bedroom look a little less plain. If you've gone to the trouble of getting a headboard, odds are pretty good you want to show it off. Luckily, depending on the type of headboard you have, there are a few different ways to make it stand out.

Method 1
Method 1 of 3:

Raising a Freestanding Headboard with Risers

PDF download Download Article
  1. This method is cheap, easy, and works really well — just as long as your headboard is wedged firmly between your mattress the wall. Simply take a pair of sturdy, plastic containers and place one under each end of your headboard. [2]
    • If you’re worried plastic containers won’t be able to hold your headboard, you can always substitute something heavier, like a couple of boxes of old books.
  2. You can pick up plastic bed risers at most any store that sells bedroom or dorm furniture (they come in a wide range of sizes), then just place them under each side of your headboard. If you've got a drill handy, you can turn basic wood blocks into risers by drilling a hole big enough to hold your headboard's legs. [3]
    Advertisement
  3. You'll need a couple of pieces of plywood about as thick as your headboard's legs. The goal is to cut an L-shaped space, which you'll slide the headboard leg into.
    • Holding the left leg of your headboard over the upper right corner of one plywood piece, trace the leg's outline onto the wood using a pencil or marker. (Do the same with the right headboard leg and the upper left corner of the other plywood piece.)
    • Use a saw to cut away those outlined chunks of wood.
    • Drill two bolts through the middle of each piece of plywood, securely connecting the wood to the legs.
    • Screw nuts onto the end of the bolts to make sure they stay in place.
    • This method only works if your headboard is also made of wood.
    4. Advertisement
Method 2
Method 2 of 3:

Working with a Bed Frame

PDF download Download Article
  1. With many adjustable beds — like the one you might have in your dorm room — the frame can be raised (to give you more storage space) or dropped (to make more of the head and foot of the bed visible). Simply remove the pegs on top of all four bedposts, lower the bed to whatever height you'd like, and pop those pegs back in.
    • You'll need a hammer to get the pegs in and out.
    • With this setup, you'll also have to lower the footboard to the same height.
  2. Using a socket wrench and flat-head screwdriver to tighten the bolts, attach the brackets to the headboard plates currently on each side of your bed frame (you'll need to unscrew your headboard first). You can now attach your headboard to the plate using the upper slots on the extension brackets, increasing the height of your headboard. [4]
    • These brackets are sold at most hardware stores.
    • The size socket you use will depend on the size of the bolts included with your extension brackets.
    • This method will also lower your bed slightly.
  3. If you want your headboard to be higher but like the idea of sleeping closer to the floor, you can use risers to give some extra height to your adjusted bed. Alternately, you can make your own risers by drilling holes in a pair of wood blocks large enough to hold your headboard's legs.
    4. Advertisement
Method 3
Method 3 of 3:

Lifting a Wall-Mounted Headboard

PDF download Download Article
  1. If your headboard is attached to the wall, then it was either put up using metal wall fasteners or screwed directly into a wall stud — a section of the wall that you use to hang really heavy objects. Carefully take down the headboard using a screwdriver or a drill, set to reverse.
  2. Whether you're using wall fasteners or going right into the wall, you've got to make sure you're drilling into the stud. Using a ruler or other straight edge, make a mark on the wall directly above where the previous screws or fasteners were attached. [5]
    • The distance between the old holes and new marks will be however much higher you'd like to have your headboard.
    • Your headboard might have more than one set of mounting brackets or holes. If so, make marks on the wall for each one.
  3. Begin by putting up the wall fasteners, if you're using them. While a friend holds the headboard in place, use a drill to screw it into its new spot on the wall. [6]
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Since you’ll be lifting heavy objects no matter which method you choose, you should ask a friend to help you out.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      Using Risers to Raise Your Headboard

      • 2 large tupperware containers
      • 2 plastic risers or wood blocks
      • 2 pieces of plywood
      • Handsaw (or other small saw)
      • Drill
      • Four nuts
      • Four bolts

      Working with a Bed Frame

      • Rubber mallet
      • Flat-head screwdriver
      • 4 plastic bed risers
      • 2 height extension brackets
      • Socket wrench and socket

      Lifting a Wall-Mounted Headboard

      • Drill
      • Screws
      • Wall fasteners (optional)

      You Might Also Like

      How to
      Clean and Deodorize Your Mattress with Baking Soda
      How to
      Properly Make Your Bed
      How to
      Fix a Squeaking Bed Frame
      How to
      Take Apart a Sleep Number Bed
      How to
      Neatly Make Your Bed the Right Way
      How to
      Keep a Bed from Moving
      How to
      Make Your Top Bunk Cool
      How to
      Make a Hotel Bed: Simple Steps
      How to
      Put a Futon Together
      How to
      Make a Bed on the Floor
      How to
      Fold a Futon
      How to
      Empty a Waterbed
      How to
      Change Sheets in an Occupied Bed
      How to
      Raise Your Bed
      Advertisement

      References

      1. ↑ https://www.bobvila.com/slideshow/make-your-bed-16-easy-diy-headboards-44410
      2. ↑ https://www.youtube.com/watch?v=9wT5Bpcc5T8
      3. ↑ https://todayscreativeideas.com/make-diy-bed-risers/
      4. ↑ https://www.youtube.com/watch?v=V_AnhOxLnI0
      5. ↑ https://www.youtube.com/watch?v=O7bW2Nyvlpw
      6. ↑ https://www.youtube.com/watch?v=O7bW2Nyvlpw

      About This Article

      Thanks to all authors for creating a page that has been read 39,966 times.

      Did this article help you?

      Advertisement