How to Reduce Radon

PDF download Download Article
PDF download Download Article

Radon is a colourless, odourless radioactive gas that naturally occurs in the soil due to the breakdown of uranium. It is a leading cause of lung cancer, so it’s important to contact your state radon office to obtain a test kit or find a professional to test the radon levels for you. While the best thing to do is to install a professional radon reduction system, you can take some preliminary steps by sealing cracks and openings in the building as well as increasing the ventilation.

Method 1
Method 1 of 2:

Making Adjustments Yourself

PDF download Download Article
  1. Without the right equipment and techniques, you could actually increase the levels of radon in your home! If you decide not to use a certified contractor to reduce radon, it’s essential that you contact your state radon office to find training courses in your area. Enroll in and attend these training classes to learn how to properly reduce radon levels. [1]
    • For instance, you’ll learn how to properly test for radon.
    • You may also be taught how air pressure affects ventilation and how radon moves through water.
  2. Cracks and openings in the building can allow radon to flow into your home or office. All entry points (like for utilities), cracks, drains, and openings can be filled with urethane foam. Wall and floor joints can be sealed with polyurethane membrane sealants. [2]
    • Supplies can be found at your local hardware store.
    Advertisement
  3. Ventilation is key for reducing radon levels. Whenever possible, have several windows open on the lowest level of your home or office, which is closest to the soil and source of the radon. Even a small crack allows fresh air to flow in, lowering the concentration of radon in the air. You can opt to open windows on upper levels as well to allow air to flow throughout the entire space. [3]
  4. Fans get the air in your home or office circulating, while a positive ion generator charges the particles of radon. The particles are then attracted to the walls, floor, and ceiling, preventing them from being absorbed into your lungs. [4]
  5. Radon comes into your home or office because the air pressure is lower than it is outside, drawing radon in like a vacuum. Exhaust fans further decrease the air pressure, so using them actually increases the concentration of radon in the air. If you must use an exhaust fan, open several windows in the home or office as well. [5]
  6. If you have exposed earth in your basement, storage area, crawlspace, or another area of your home, you can significantly reduce radon levels by covering the soil. Use high-density polyethylene plastic to completely cover the exposed earth. Seal the seams as well as the edges to the foundation to keep radon from leaking into the air.
  7. Though radon levels in water aren’t usually high enough to significantly impact the levels of radon in the air, you can take steps to reduce the radon in your water, if necessary. The best thing to do is run your water through a granular activated carbon unit to remove the radon. Be sure to replace the unit when necessary and dispose of old units as per the laws in your region. [6]
    8. Advertisement
Method 2
Method 2 of 2:

Installing a Radon Reduction System

PDF download Download Article
  1. Contact your national radon office for a list of certified contractors that can safely make adjustments to your property to reduce radon exposure. Speak with several different contractors and ask them to provide you with a bid. Consider the contractor’s level of experience as well as the price they quote you when deciding which person to hire. [7]
    • Depending on the levels of radon and your home’s construction, a reduction system can cost between $800 and $1,500. [8]
  2. Some techniques work to reduce the amount of radon entering your home, while others focus on removing radon already in the air. Work with your contractor to choose the best techniques for the levels of radon in the space as well as your budget. Ask the contractor to prepare a contract that details the strategy you have chosen, then review and sign it before any work begins. [9]
    • If the levels in your home or office are 4 pCi/L (picocuries per liter) or higher, you should take steps to reduce the radon.
    • Unfortunately, there are no symptoms of radon exposure until it leads to lung cancer, so rely on the radon test results to determine if you need to take action.
  3. After the contractor is finished making adjustments and installations, ask them to walk you through the system. Ask questions if you need clarification and write down any instructions or pertinent information the contractor provides. [10]
    • Radon reduction equipment should be clearly labeled and must have a warning device that alerts you of malfunctions.
  4. Many strategies to reduce radon can impact your heating and cooling bills due to increased ventilation. Fans and other equipment may also raise your electric bill. Speak to the contractor about how much of an increase you can expect. Keep in mind that removing radon from your home can significantly lower your risk of lung cancer, so the extra cost is worthwhile. [11]
  5. Periodically check on the equipment to ensure it is operating correctly. Contact your contractor if there are any issues or malfunctions. Also, fans need replaced about every 5 years, and filters, like for a heat recovery ventilator, may need changed as often as every 6 months. [12]
    6. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Deal With Smoke From Your Neighbor's Apartment
      How to
      Detect Carbon Monoxide without a Detector
      How to
      Recognize the Symptoms of Toxic Poisoning
      How to
      Make an Air Filter
      Asbestos in Plaster Walls: Identification, Removal, & More
      How to
      Use Talcum Powder Safely
      How to
      Test for Asbestos
      How to
      Have Clear Skin Naturally
      How to
      Test for Mercury
      How to
      Know if Your Cosmetics Contain Lead
      Advertisement

      References

      1. ↑ https://www.epa.gov/sites/production/files/2016-02/documents/2013_consumers_guide_to_radon_reduction.pdf
      2. ↑ https://www.abe.iastate.edu/extension-and-outreach/radon-reduction-methods-a-homeowners-guide/
      3. ↑ https://www.abe.iastate.edu/extension-and-outreach/radon-reduction-methods-a-homeowners-guide/
      4. ↑ http://www.inspection-perfection.com/simple-ways-to-reduce-radon.html#.WgILsIFSzrc
      5. ↑ https://www.abe.iastate.edu/extension-and-outreach/radon-reduction-methods-a-homeowners-guide/
      6. ↑ https://www.abe.iastate.edu/extension-and-outreach/radon-reduction-methods-a-homeowners-guide/
      7. ↑ https://www.epa.gov/sites/production/files/2016-02/documents/2013_consumers_guide_to_radon_reduction.pdf
      8. ↑ https://sosradon.org/reducing-radon-in-your-home
      9. ↑ https://www.epa.gov/sites/production/files/2016-02/documents/2013_consumers_guide_to_radon_reduction.pdf
      1. ↑ https://www.epa.gov/sites/production/files/2016-02/documents/2013_consumers_guide_to_radon_reduction.pdf
      2. ↑ https://www.epa.gov/sites/production/files/2016-02/documents/2013_consumers_guide_to_radon_reduction.pdf
      3. ↑ https://www.epa.gov/sites/production/files/2016-02/documents/2013_consumers_guide_to_radon_reduction.pdf

      About This Article

      Thanks to all authors for creating a page that has been read 95,908 times.

      Reader Success Stories

      • Tim Crawford

        Jun 15, 2020

        "I just had my Radon level checked and it was 5.1. I started looking for ways to reduce Radon entering my house. ..." more
      Share your story

      Did this article help you?

      Advertisement