PDF download Download Article
DIY fixes for your interior fridge leaks and when to call a repair person
PDF download Download Article

If water is pooling in the bottom of your fridge or freezer, there are only a few possible causes and we're here to help. The good news is that you can easily fix some of these issues yourself! Check out our guide to determining the cause of the leak in your refrigerator, how to fix it, and how to prevent future leaks from putting a damper on your meal plans.

Why Your Refrigerator Is Leaking Water Inside

A refrigerator that’s leaking water on the inside may have a clogged defrost drain or condensation hole. The temperature inside could also be too warm, causing condensation buildup. Or, the fridge may be sitting unevenly on the floor, preventing the water from draining properly.

Section 1 of 4:

Causes of a Leaks Inside Your Refrigerator

PDF download Download Article
  1. This drain collects water from melted ice after the fridge defrosts. The water flows down the drain hole, which directs the moisture down to the drain pan at the bottom of the fridge. When the drain is clogged with ice, the water overflows the collection trough and leaks inside the freezer. [1]
  2. It’s supposed to drain the naturally forming condensation in your fridge into the drain pan. So if you see water collecting near it and you notice a layer of moisture on the inside walls and shelves, the drain may be clogged with food or other debris. [2]
    Advertisement
  3. A warm, humid environment will cause condensation to drip onto your shelves and walls and collect at the bottom of the fridge, underneath the crisper drawers. [3]
  4. A cracked ice dispenser or one that’s been turned off accidentally and gotten too warm may leak water into the freezer and cause ice to form on the inside of the door. [4]
  5. The front feet of your refrigerator should sit 1 4 to 1 2 inch (0.64 to 1.27 cm) higher than the back feet. This allows the coolant to circulate, the door to shut on its own, and the water in the defrost drain to flow downward more efficiently. [5]
  6. When your refrigerator doesn't sit flush against the floor because of uneven feet or flooring, water may not flow as efficiently through the defrost drain line. If the water can’t drain, it will form a puddle and leak water and ice into the freezer portion of your fridge. [6]
  7. Advertisement
Section 2 of 4:

How to Fix Water Leaks Inside Your Refrigerators

PDF download Download Article
  1. Unplug the refrigerator and take all the items and shelves out of the freezer. Unscrew and unplug the ice dispenser (if there is one) and the back panel covering the drain hole. Then fill a turkey baster with warm water and squeeze it into the drain hole. [7]
    • Keep squeezing warm water into the drain hole until the line unclogs. You’ll know it’s clear when the puddle of water surrounding the drain hole flows away.
    • Clean all the ice out of the freezer, replace all the parts you removed, and plug the refrigerator back in. If a clogged defrost drain was causing your leak, you should be in the clear!
    • If you have a Whirlpool fridge, unplug the fridge, pull it away from the wall, and unscrew the left side of the back plate. Reach in and pull the plastic boot off the end of the defrost drain line, clean the gunk out of it with warm water, and replace it. Repeat this process every few months. [8]
  2. If the seal on the door is damaged, that means it’s not working properly and is letting warm air in, which is the root cause of the humidity. [9]
    • Appliance technician Aaron Beth recommends purchasing a new seal directly from your refrigerator model’s manufacturer. You can’t repair it, he says, because it’s made out of vinyl with magnets inside, and you can’t mend a tear or a split in that type of material.
  3. Unplug your fridge, remove the crisper drawers, and locate the condensation drain hole at the back of the fridge. Use a turkey baster to squeeze warm water down the condensation hole until you notice that water no longer pools around the hole. [10]
    • Clean the water up with a towel, replace the crisper drawers and food items, and plug your refrigerator back in. Ensure the thermostat is set to the optimal temperature of 40 °F (4 °C) and that your door fully seals.
  4. According to the USDA, refrigerators should have an internal temperature of 40 °F (4 °C) to keep the food safe and the air crisp. Adjust the thermostat, wipe up any condensation with a towel, and see if that fixes the problem. [11]
  5. Then check that neither the ice tray nor the ice dispenser have any holes or cracks. If they do, replace them with parts that are compatible with your fridge. [12]
    • If you still notice a leak, ensure the freezer is at the USDA-recommended temperature of 0 °F (−18 °C). If your freezer isn’t cold enough, the ice won’t be able to freeze and may leak out or cause condensation. [13]
  6. Most modern refrigerators come with self-leveling feet, but some older models may require manual adjustments. [14]
    • To adjust the refrigerator feet yourself, gain access to the front feet by removing the front grille and to the back feet by pulling the fridge away from the wall.
    • Use a crescent wrench to raise or lower each foot until the front of the fridge sits 1 4 to 1 2 inch (0.64 to 1.27 cm) higher above the floor than the back. Use a tape measure or yardstick to check your measurements.
    • Place a spirit level on top of the fridge parallel to the door or doors to ensure the feet are adjusted correctly and the fridge is balanced.
    • If the floor is extremely uneven, Beth suggests placing a thin piece of plywood underneath the feet to make them level.
  7. Advertisement
Section 3 of 4:

When to Call a Professional to Repair Your Fridge

PDF download Download Article
  1. There could be a bigger problem that requires a skilled professional. If the problem is that your fridge needs more Freon or a broken fan, for example, those are expensive issues that only the most confident DIY homeowners should tackle.
Section 4 of 4:

Preventing Water from Leaking Inside Your Refrigerator

PDF download Download Article
  1. Remove all the shelves and drawers, then clean all the food debris from the inside of the fridge and freezer. Soak a clean rag in hot, soapy water and wash the walls, then use another wet rag to remove the soap (don’t forget to wipe out the drain holes! [15]
    • After cleaning your fridge with soapy water, you may want to sanitize all the surfaces inside. To do so, make a solution with 1 tablespoon (15 mL) of bleach to 1 gallon (3.8 L) of water, spray it into your fridge, and wipe it down with a clean rag.
    • Wash all the shelves and drawers by hand in the sink with hot, soapy water. Dry them completely before putting them back in the refrigerator.
  2. If you see water starting to pool around the condensation or defrost drain holes, immediately unplug the fridge and use the DIY fixes explained above to address the problem.
  3. If your fridge is an older model and doesn’t automatically defrost, defrost it yourself by removing all the food items and shelves, unplugging the fridge, and leaving the doors open until all the ice melts. [16]
    • Set out towels and bowls on the floor and inside the fridge to collect any water that drips out.
    • Clean the fridge and freezer and dry it thoroughly before replacing all the parts and turning it back on.
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 781 times.

      Did this article help you?

      Advertisement