How to Remove Efflorescence from Brick

PDF download Download Article
PDF download Download Article

Efflorescence is the result of water soluble salts building up over time on the porous surface of bricks. It isn't harmful to the bricks, it just doesn't look good. Efflorescence is easily removed if you catch it right away. Using a stiff scrubbing brush, most of it will easily come off. Add water and vinegar or muriatic acid for a stronger solution. Although it is abrasive, sandblasting also works to get rid of tough cases of efflorescence. However, this will also wear away the brick, so be sure to seal it with a waterproofing material after you are done.

Method 1
Method 1 of 2:

Scrubbing Brick with a Cleaning Solution

PDF download Download Article
  1. In mild cases, efflorescence can be removed just by brushing the dry surface. Use stiff-bristled nylon brush or a wire brush to scrub the brick surface. [1]
    • Using a dry brush is most effective if the efflorescence is only in small patches.
    • It's good to avoid water if you can help it, since water is what causes efflorescence.
  2. For exterior walls, use a garden hose to spray the efflorescence with water. [2] For interior surfaces, use a spray bottle filled with water to wet the surface. Then, use a stiff brush and mild dish detergent to scrub away the powder. Rinse the soap off with fresh water. [3]
    • Once the brick is dry, check to see if the efflorescence is gone. If it isn't, you may need to repeat this or try a stronger cleaning solution.
    • When treating an outdoor wall, make sure the temperatures will be above freezing all day.
    Advertisement
  3. Mix equal parts of water and white vinegar in a spray bottle. Spray the solution onto the surface and let it sit for 5 minutes. Then, spray the bricks with the mixture again and use a stiff brush to scrub away the efflorescence. Scrub in small, circular motions before rinsing the surface with fresh water. [4]
    • Vinegar can be abrasive on old bricks. Use a different solution if your bricks are more than 20 years old.
    • You can neutralize the acidity of vinegar by mixing a solution of 2-3 tablespoons (30-45g) of baking soda with a spray bottle full of water. Spray the solution onto the bricks you treated with vinegar.
  4. A mixture of 1 part muriatic acid and 12 parts water is very effective at removing efflorescence. Presoak the wall with fresh water, then apply the acid mixture using a brush. Let the mixture soak into the brick for about 5 minutes. Then, rinse the brick surface with plain water. [5]
    • Wear rubber gloves, safety goggles, and a respirator when working with acid.
    • When mixing the solution, always pour acid into water, never water into acid.
    5. Advertisement
Method 2
Method 2 of 2:

Using a Sandblaster to Remove Stubborn Efflorescence

PDF download Download Article
  1. A sandblaster will wear away the surface of the bricks, so you should only use one if you have already tried a gentler method of removing efflorescence. A sandblaster will remove more buildup, but will also make bricks more susceptible to efflorescence later. [6]
    • Avoid sandblasting brick older than 20 years. This causes more harm than good.
  2. Sandblasters can cause projectiles of stone, wood, or anything the machine hits to fly back towards you. Wear a face shield with a hood and cover your skin with long sleeves and pants. Wear boots and rubber gloves to protect your hands and feet. [7]
    • It's dangerous to breathe in the debris caused by sandblasting. Make sure your face, especially eyes, nose, and mouth, are completely covered.
  3. Use duct tape to secure dropcloths over anything you don't want damaged by the potential flying brick. This can include any shrubbery, gardens, electrical outlets, or light fixtures. [8]
    • Alternatively, use plastic sheeting to cover anything you don't want damaged.
  4. Use fine sandblasting media for the safest results. Set the sandblaster to the lowest pressure setting to avoid damaging the bricks. [9]
    • The lowest pressure should be strong enough to remove efflorescence, but if it isn't, turn the pressure up a little bit at a time.
  5. Turn the blaster on and use it to wash away the efflorescence from a distance of at least 5 inches (13 cm). Go back and forth across the bricks using smooth, horizontal movements. [10]
    • If you don't feel comfortable using a sandblaster on your own, a contractor should be able to take care of it.
  6. Some sealants need to be applied with a spray bottle, while others can be painted on with a brush or roller. Use a sealant specifically made to keep efflorescence off of bricks. This is especially important after sandblasting, as the process will wear away the protective surface of the bricks. [11]
    • Apply the sealant from the bottom of the wall, up.
    • Keep your plants, windows, and electrical appliances covered up with dropcloths while you are applying the waterproofing material.
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Scrubbing Brick with a Cleaning Solution

      • Stiff scrubbing brush
      • Garden hose or spray bottle
      • Dish detergent
      • White vinegar
      • Muriatic acid

      Using a Sandblaster to Remove Stubborn Efflorescence

      • Sandblaster
      • Sandblasting media (fine)
      • Dropcloths
      • Duct tape
      • Protective clothing
      • Waterproofing sealant

      You Might Also Like

      How to
      Hang Something on Brick
      How to
      Nail Into Brick
      How to
      Build a Chimney
      How to
      Build a Brick Wall
      How to
      Hang on Stucco Without Drilling
      How To Sculpt Stone Like an Artist
      How to
      Stucco a House
      How to
      Drill Into Brick: Preparation, Tools, and Best Methods
      How to
      Make a Brick Kiln
      Guide to Building a Brick Column: Footing, Courses, & Capstone
      An Expert-Approved Guide to Cutting Brick like a Pro
      How to
      Clean Soot from Brick
      How to
      Drill Through Granite
      How to
      Make Bricks from Concrete
      Advertisement

      References

      1. ↑ https://www.masonryinstitute.org/pdf/612.pdf
      2. ↑ Melanie Garcia. Professional House Cleaner. Expert Interview. 10 October 2019.
      3. ↑ https://www.masonryinstitute.org/pdf/612.pdf
      4. ↑ https://www.apartmenttherapy.com/how-to-clean-a-brick-fireplace-with-all-natural-cleaners-apartment-therapy-tutorials-216668
      5. ↑ https://www.bobvila.com/articles/how-to-clean-brick/
      6. ↑ https://www.masonryinstitute.org/pdf/612.pdf
      7. ↑ https://thecraftsmanblog.com/the-dangers-of-sandblasting-old-brick/
      8. ↑ https://thecraftsmanblog.com/the-dangers-of-sandblasting-old-brick/
      9. ↑ https://youtu.be/3sMhRP3Awnw?t=50
      1. ↑ https://youtu.be/3sMhRP3Awnw?t=345
      2. ↑ https://www.masonryinstitute.org/pdf/612.pdf
      3. ↑ https://www.gsa.gov/node/1100?Form_Load=88552

      About This Article

      Thanks to all authors for creating a page that has been read 116,340 times.

      Did this article help you?

      Advertisement