How to Remove Paint from Light Fixtures

PDF download Download Article
PDF download Download Article

Sometimes, in the course of painting a room or ceiling, a small amount of paint will end up on a light fixture. Or maybe it was painted on purpose to create a new look. Either way, if you want to remove it, you can easily strip it from both the fixture and glass with a little elbow work and patience.

Part 1
Part 1 of 3:

Creating a Safe Workspace

PDF download Download Article
  1. Whether you are removing the light fixture from the ceiling or wall, or stripping it as it is, cut off the electricity before you start. Go to your circuit breaker or fuse box. Switch off the appropriate circuit or unscrew the correct fuse. Eliminate the risk of electrical shock and injury. [1]
    • If your circuits or fuses are missing labels, either shut off all the power or test each one until you find the correct one.
  2. If possible, favor taking it down over cleaning it where it is. Reduce the chance of stripping paint from the ceiling or wall by accident. Work in an area of your choosing, with proper ventilation and safer footing than a ladder. Exact instructions for removing light fixtures will vary according to their design, but generally they follow these points: [2]
    • Taking light bulbs out to avoid damage.
    • Unscrewing the plate from the mounting bracket in the ceiling.
    • Using a circuit tester to confirm that the wiring is powerless.
    • Disconnecting the wiring.
    Advertisement
  3. Lay down a dropcloth, tarp, newspapers, or similar material over the floor. If you have removed the light fixture, also cover your worktable. If you are using more than one covering, check for gaps between them. If you are keeping the fixture in place, apply painter’s tape around it to protect the ceiling or wall. [3]
    • Drips from the cleaning agent may strip paint or otherwise mar other surfaces.
  4. Wear cleaning gloves. Protect your eyes with safety glasses, especially if you are working from underneath the fixture. If using a ladder, make sure it is high enough to work safely, rather than overreach and lose balance on a shorter ladder. Open windows and use fans to create cross-breezes for circulation. [4]
    • Fumes from cleaning agents may be overpowering or poisonous. For long projects or areas with poor ventilation, wear a ventilation mask, especially if you are working on a ladder.
    5. Advertisement
Part 2
Part 2 of 3:

Stripping Paint from Fixtures

PDF download Download Article
  1. If you painted the fixture yourself, ask yourself what you used: latex, acrylic, or spray paint. [5] For latex or acrylic, you will need rubbing alcohol to strip it. [6] [7] For spray paint, you will need acetone. [8] If someone else painted it, look for brush strokes, which indicates latex or acrylic paint.
    • If you are still unsure, select two separate areas to test each chemical. [9] Do not mix rubbing alcohol and acetone by applying it to the same area. Wipe off whichever one doesn’t work, wipe again with clean water to rinse, and let it dry before using the other.
  2. If the area to be cleaned is very small, simply wet a corner with rubbing alcohol or acetone. For larger surface areas, pour the agent into a plugged sink or bowl and soak the whole cloth. Wring out any excess to reduce the chance of accidental drips. [10]
    • Both rubbing alcohol and acetone may affect other surfaces if they come into contact by mistake.
  3. Scrub the surface area with your soaked cloth. [11] Soak the paint first so the cleaning agent has time to be absorbed and loosen the paint’s bond. Then scrub more forcefully to remove the paint. [12]
    • Due to the heat generated by light bulbs, the paint may have baked onto the surface, which may make rubbing ineffective.
    • However, always start with cloths to see if that works, since harder tools may damage the metal, wood, or plastic.
  4. If rubbing with a cloth doesn’t work, use a utility knife to cut X’s in the paint. Apply as little pressure as possible to avoid nicking the fixture’s original surface. Then soak a new cleaning cloth with mineral oils and wipe it over the paint. Give it a half-hour or more to sit. Then try rubbing the paint off again. Repeat as needed.
    • Depending on how thick the paint it is, this may require several soaks. Very thick coats may require a few days’ worth of repeated applications.
    5. Advertisement
Part 3
Part 3 of 3:

Removing Paint from Glass

PDF download Download Article
  1. Pour equal parts white vinegar and clean water into a pot. Stir to mix. Set the pot on an oven burner and turn the heat to medium-high. Bring the solution to a boil. [13]
  2. First, put on a pair of heat-resistant cleaning gloves. Protect your hands from scalding, since you want to use the solution while it’s still hot. Immerse a portion of your cleaning cloth into the water. Squeeze out the excess to avoid dripping boiled water on yourself. [14]
  3. Gently rub the cloth over the painted area, rewetting as necessary. Worry less about removing the paint at first and more about soaking it. Let the heated solution weaken the paint’s bond to the glass for easier removal. [15]
  4. Rewet your cloth. Scrub the painted area a second time. Apply more pressure this time, but be careful not to break the glass. Scrub the paint clear of the glass as it continues to loosen. Rewet your cloth and repeat as needed. [16]
  5. If any paint refuses to budge, wet the surface area again with your solution. Depending on how long you’ve been working, it may have cooled off by now, so reheat it if you need to. Wait a moment for the paint to soak it in. Then gently scrape the paint off with a utility knife. Work slowly and surely to avoid scratching the glass. [17]
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you remove paint from vinyl?
    Jeff Baldwin
    Residential Painter
    Jeff Baldwin is a Residential Painter and the Owner of Baldwin Custom Painting, based in San Francisco, CA. With two decades of painting experience, Jeff specializes in high-end residential and small commercial painting projects. Dedicated to quality craftsmanship, Jeff and Baldwin Custom Painting provide bonded/insured, licensed, and lead-safe certified services in residential painting, light commercial painting, and wood refinishing.
    Jeff Baldwin
    Residential Painter
    Expert Answer
    Spray some latex paint remover on the dried water-based paint. Leave it for a few minutes. Then scrub it with a cloth and warm water.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    What should I do to remove acrylic paint from various surfaces and clothing?
    Jeff Baldwin
    Residential Painter
    Jeff Baldwin is a Residential Painter and the Owner of Baldwin Custom Painting, based in San Francisco, CA. With two decades of painting experience, Jeff specializes in high-end residential and small commercial painting projects. Dedicated to quality craftsmanship, Jeff and Baldwin Custom Painting provide bonded/insured, licensed, and lead-safe certified services in residential painting, light commercial painting, and wood refinishing.
    Jeff Baldwin
    Residential Painter
    Expert Answer
    You can use a latex paint remover and a small firm bristle brush to remove acrylic paint from various surfaces and clothing.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 1
  • Question
    I have an electrified Moroccan lantern made of tin. The paint has come off in a few places. Could I use an electric stripper?
    Community Answer
    Yes, that can work. Along with what the article says, paint strippers are a good alternative.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

        • Clothes should not be reused or machine-washed or -dried.
      Advertisement

      Things You’ll Need

      For safety:

      • Cleaning gloves
      • Protective eyewear
      • Drop cloths or other protective covering
      • Ventilation
      • Ventilation mask


      For fixtures:

      • Lint-free cleaning cloth(s)
      • Rubbing alcohol or acetone
      • Utility knife
      • Mineral oils


      For glass:

      • White vinegar
      • Water
      • Pot
      • Oven
      • Heat-resistant cleaning gloves
      • Lint-free cleaning cloth(s)
      • Utility knife

      You Might Also Like

      How to
      Remove Paint from Walls
      How to
      Remove Paint from an Acrylic Tub or Bath
      How to
      Remove Paint from Wood
      How to
      Repair Peeling Paint
      How to
      Remove Paint from Vinyl
      How to
      Remove Primer
      How to
      Strip Paint
      The Top 4 Ways to Remove Powder Coating
      How to
      Remove Epoxy Paint
      How to
      Remove Paint from Iron Railings
      Advertisement

      References

      1. ↑ https://www.apartmenttherapy.com/how-to-remove-a-light-fixture-176020
      2. ↑ https://www.apartmenttherapy.com/how-to-remove-a-light-fixture-176020
      3. ↑ https://www.bobvila.com/articles/how-to-remove-paint-from-metal/
      4. ↑ https://www.diybudgetgirl.com/removing-paint-from-metal/
      5. ↑ Jeff Baldwin. Residential Painter. Expert Interview. 1 March 2021.
      6. ↑ https://www.creeklinehouse.com/2013/04/how-to-get-rid-of-paint-spills.html
      7. ↑ https://www.diybudgetgirl.com/removing-paint-from-metal/
      8. ↑ https://www.diybudgetgirl.com/removing-paint-from-metal/
      9. ↑ Jeff Baldwin. Residential Painter. Expert Interview. 1 March 2021.
      1. ↑ https://www.diybudgetgirl.com/removing-paint-from-metal/
      2. ↑ https://www.diybudgetgirl.com/removing-paint-from-metal/
      3. ↑ Jeff Baldwin. Residential Painter. Expert Interview. 1 March 2021.
      4. ↑ https://www.apartmenttherapy.com/a-nontoxic-scra-109180
      5. ↑ https://www.apartmenttherapy.com/a-nontoxic-scra-109180
      6. ↑ https://www.apartmenttherapy.com/a-nontoxic-scra-109180
      7. ↑ https://www.apartmenttherapy.com/a-nontoxic-scra-109180
      8. ↑ https://www.apartmenttherapy.com/a-nontoxic-scra-109180
      9. ↑ https://www.apartmenttherapy.com/how-to-remove-a-light-fixture-176020
      10. ↑ https://www.diybudgetgirl.com/removing-paint-from-metal/
      11. ↑ https://www.diybudgetgirl.com/removing-paint-from-metal/
      12. ↑ https://www.diybudgetgirl.com/removing-paint-from-metal/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 68,897 times.

      Did this article help you?

      Advertisement