How to Remove Polyurethane

PDF download Download Article
PDF download Download Article

Maybe you're staring at a piece of furniture you want to refinish or perhaps your hardwood floors need a touch up. Either way, you're faced with the challenge of taking off a coating of polyurethane, which is a clear substance used to protect surfaces. You'll need paint stripper and a metal scraper to remove the polyurethane. But don't forget to prep yourself and your work area before you begin.

Part 1
Part 1 of 3:

Prepping Your Work Area

PDF download Download Article
  1. Generally, you need chemicals to remove polyurethane. Because these chemicals are often harsh, you need good ventilation to protect yourself. If you can, go outside to work. If you're working on floors, create cross-ventilation to help keep you safer. [1]
    • To create cross-ventilation, open the doors and windows in the room. Also, it's a good idea to set up one fan blowing inward and one fan blowing towards the outside to get the air moving.
  2. If you're working on a piece of furniture inside, you should put something down to shield the floor from drips. A plastic tarp underneath the piece of furniture should work well to provide protection. [2]
    • You can tape down the edges if you're worried about tripping.
    Advertisement
  3. Paint stripper can do a number on you if you're not careful. You'll need rubber gloves to protect your hands. Wear goggles to protect your eyes. Finally, you'll need a vapor ventilator mask, also known as a respirator, available at hardware stores, so you don't inhale the fumes.
    • You should also wear closed-toed shoes, long sleeves, and pants if possible.
  4. Chemical-based paint strippers, such as those with methylene chloride, are very effective. However, they're also more harsh on your skin and can cause respiratory problems if you're not careful. If you're worried about the effects, you can use water-based strippers instead, though they do take much longer to work. [3]
    5. Advertisement
Part 2
Part 2 of 3:

Applying the Paint Stripper

PDF download Download Article
  1. Completely coat the polyurethane with paint stripper. It needs to look wet with the paint stripper, so be generous with your application. Use an old paintbrush or even a paint roller. Be sure to get into any nooks and crannies. [4]
    • The type of paint brush isn't important, but you may want to get one you'd be willing to throw away afterwards.
  2. The paint stripper is going to do the work for you, so you need to let it soak into the polyurethane. Ten minutes is usually enough for a chemical-based paint stripper. You'll know it's ready when the polyurethane starts wrinkling and bubbling. [5]
    • If you're using a water-based stripper, it will take much longer to work, maybe even six to twenty-four hours. Check the back of the can to find out how long it should take. [6]
  3. If you need to leave the project for longer than it says on the back of the can, then you should try to cover the project to keep the paint stripper wet. The stripper needs to be wet to soak in properly. Another plastic tarp should be sufficient, and you can place it lightly over the furniture or flooring. [7]
    4. Advertisement
Part 3
Part 3 of 3:

Scrubbing off Polyurethane

PDF download Download Article
  1. A metal scraper is a good place to start, though if you're worried about scratching the surface, you can use a plastic one. The polyurethane should peel off fairly easily as you move along. The paint stripper should have done the hard work.
    • Scrape in the direction of the wood grain. Scrubbing against the grain can damage the surface of the floors or furniture. Plus, if you add any scratches, it will look like the grain of the wood. [8]
  2. In curved or decorative areas, a scraper won't work as well. Instead, scrub it with a metal brush, as the bristles will get in all the nooks and crannies and remove the polyurethane. [9]
  3. After wash is a solvent you use after paint stripper. Its purpose is to clean up the end of the polyurethane, as well as remove the paint stripper you used. Just use a paper towel to rub it in. You don't have to leave it on for any time. Just rub it on until the rest of the polyurethane comes up. [10]
  4. If the first round didn't take off enough of the polyurethane, go through the process again. Apply another layer of paint stripper to the area, and then scrape it down again, checking to see if that completed the process.
  5. After you've removed most of the polyurethane, sand down what remains. You can simply use fine steel wool. [11] You can also use 150-grit sandpaper. The sandpaper will smooth it out and take off the last of the polyurethane. [12]
    • The after wash should have taken off most of the polyurethane, which is why you shouldn't need a heavy-duty sandpaper. Always rub with the grain.
  6. Take the water and rags to a hazardous waste disposal unit in your town, along with leftover stripper. Do not throw rags and chemicals directly into the trash or sewer.
    • Contact your city to find your local waste disposal center.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What tools are needed to strip round legs?
    Community Answer
    Steel wool works well on any curved surface or on carved details. Make sure you have relatively fine grade so you don't scratch the wood. A wire brush also works well for curved areas, such as turned legs. I prefer a brass brush over steel as it is softer and less prone to damaging the wood. With either steel wool or brushes you will need to either have enough on hand when they clog up, or spend time cleaning them out with more stripper. And wear gloves to keep the stripper off your skin.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 9
  • Question
    What type of stripper can be used that will not harm the paint underneath?
    Community Answer
    Soy stripper, because it is plant oil based rather than harsh chemical based.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 12 Helpful 26
  • Question
    I'm stripping my kitchen cupboards. I can remove the doors, but not the base. Will the stripper stay on the vertical surfaces?
    Community Answer
    Yes. Don't put as much on and do the whole thing twice.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 7
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • Paint stripper
      • Vapor ventilation mask
      • Safety goggles
      • Thick rubber gloves
      • Work clothes
      • Plastic tarps
      • Metal scraper
      • Fine steel wool or 150-grit sandpaper
      • Paint brush
      • Bucket for discarded rags

      You Might Also Like

      How to
      Build Stairs
      How to
      Cut Stair Stringers
      How to
      Figure Out the Dimensions of a Staircase
      How to
      Close Stairs
      How to
      Build Spiral Stairs
      How to
      Floor an Attic
      An Expert-Approved Guide to Epoxying Floors Yourself
      How to
      Frame a Floor
      How to
      Measure Stair Stringers
      How to
      Stain Stairs
      How to
      Install New Stair Treads
      How to
      Apply a Stain to Laminate Floors
      How to
      Close Off a Spiral Staircase
      11 Easy Ways to Light a Stairway without an Electrical Outlet
      Advertisement

      References

      1. ↑ https://blog.onfloor.com/how-to-remove-polyurethane-from-floors
      2. ↑ https://blog.onfloor.com/how-to-remove-polyurethane-from-floors
      3. ↑ https://www.bobvila.com/articles/how-to-remove-varnish/#.Wa6XU9FGnIW
      4. ↑ https://blog.onfloor.com/how-to-remove-polyurethane-from-floors
      5. ↑ https://blog.onfloor.com/how-to-remove-polyurethane-from-floors
      6. ↑ https://www.youtube.com/watch?v=bMn2K0TjHF8
      7. ↑ http://www.addicted2decorating.com/how-to-strip-paint-stain-polyurethane-from-furniture-my-top-tips.html
      8. ↑ https://www.youtube.com/watch?v=bMn2K0TjHF8
      9. ↑ http://www.addicted2decorating.com/how-to-strip-paint-stain-polyurethane-from-furniture-my-top-tips.html
      1. ↑ http://www.addicted2decorating.com/how-to-strip-paint-stain-polyurethane-from-furniture-my-top-tips.html
      2. ↑ https://www.youtube.com/watch?v=bMn2K0TjHF8
      3. ↑ http://www.addicted2decorating.com/how-to-strip-paint-stain-polyurethane-from-furniture-my-top-tips.html

      About This Article

      Article Summary X

      To remove polyurethane, you'll need to use a chemical- or water-based paint stripper. If you use a chemical-based stripper, make sure you're working outside or in a well-ventilated area and that you wear goggles, gloves, and a respirator. To get started, brush a generous amount of the paint stripper over the polyurethane. Then, let it soak in for 10 minutes if you're using a chemical-based stripper or several hours if you're using a water-based stripper. Finally, use a metal scraper, steel brush, and sandpaper to remove the polyurethane from the surface you're working on. To learn how to use after wash to help remove polyurethane, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 312,674 times.

      Did this article help you?

      Advertisement