How to Remove Scratches from a Car

PDF download Download Article
PDF download Download Article

Scratches in car paint can be caused by a variety of things. Car accidents, vandalism, poor parking, and other parking lot mishaps are all common causes for a scratch or 2 on your perfect paint job. While scratches do detract from the appearance of your car, paying a body shop for a new coat of paint or even a small touch-up can be costly. You can try buffing out surface scratches with toothpaste, using a scratch removal product for small scratches, or sanding and repainting the area if the scratch is deep.

Method 1
Method 1 of 3:

Using Toothpaste for Surface Scratches

PDF download Download Article
  1. If your fingernail does not catch on the scratches, then they are on the surface and using toothpaste might be a good option. If your fingernail does catch on them, then they are deeper and you will need to use a professional scratch removal product. [1]
  2. Before you apply toothpaste to the scratches, make sure that the area is very clean. Rubbing dirt and debris into the scratched area will make the scratches worse.
    • You can take your car to a car wash or wash it yourself.
    • To wash your car yourself, spray it with a hose to wet it all over and remove the majority of the dirt and debris. Then, use a large sponge or car-washing brush to apply soap formulated for vehicles to your car. Work the soap into all surface of your car and then use the hose to spray it off. Dry your car with a clean, dry towel.
    Advertisement
  3. Get the microfiber towel wet enough so that it is just damp. Then, apply a quarter-sized amount of the toothpaste to the towel, or a little more or less depending on the size of the scratch.
    • Whitening toothpaste works best, but you can try removing the scratches with any toothpaste you have on hand.
    • You will need to apply the toothpaste with a soft, clean, microfiber towel to ensure that rubbing in the toothpaste does not cause more damage.
  4. Push down on the microfiber cloth and move it in small circles to buff out the scratches. Do this until the toothpaste is well-distributed on the surface.
    • You will need to apply some pressure as you apply the toothpaste, but not too much.
  5. After you finish buffing out the scratches, rinse the area thoroughly to remove the excess toothpaste. Spray your car with a hose and then dry the area with a microfiber towel.
    • You can also wipe away the excess toothpaste with a wet microfiber towel.
  6. You may need to do more than 1 application to get rid of surface scratches using toothpaste. Check the area to see if the scratches are still visible and then repeat the process 1 or 2 more times if needed.
    • Make sure that you do not do more than 3 applications or you may damage the clear coat of the car’s paint.
    7. Advertisement
Method 2
Method 2 of 3:

Using a Scratch Removal Product for Small Scratches

PDF download Download Article
  1. It is important to make sure that the area is completely clean before you apply any product to it or try to buff the area. Any dirt or debris left on the surface when you buff it will result in more scratches. [2]
    • Spray your car with a hose before applying any soap to it. Then, use a sponge or brush meant for washing cars to work the soap in. Rinse the soap off completely and dry your car with microfiber towels. Be sure to use soap designed for washing cars.
  2. You can buy scratch-removal products at auto supply stores or in the auto supply section of large one-stop stores. These products are often sold as a scratch-removal kit that includes the scratch-removal solution and a buffing pad to apply the product. [3]
    • If you are unsure about what types of scratch removal product to buy, ask a sales associate for help. Employees who work in auto supply stores are usually knowledgeable about these products.
    • A microfiber towel is often a good choice for applying scratch removal products since they are gentle on the surface of your car.
    • Some products even come with a mechanical buffing tool that you can use to get rid of the scratches.
    EXPERT TIP

    Chad Zani

    Auto Detailing Expert
    Chad Zani is an Auto Detailing Expert based in Los Angeles, California. He is the Director of Franchising at Detail Garage, an automotive detailing company with locations around the U.S. and Sweden. He and his team are auto detailing experts that offer detailing and car care services.
    Chad Zani
    Auto Detailing Expert

    Scratch repair pens are best for light scratches in the car's clear coat. However, if the scratch is so deep it's into or past the paint, you'll probably need to go to a body shop.

  3. You may need a little more or less depending on the size of the scratched area. Squirt the product onto the buffing pad or microfiber cloth, and then fold it in half to work the product around the surface of the pad or cloth. [4]
    • Make sure that the product is evenly distributed on the cloth or pad before you begin.
  4. You can work the product in using a circular motion or a back and forth motion. Do what is most comfortable for you and what covers the scratched area best, but do not switch directions! Only go back and forth or in circles. Continue to work in the product for a few minutes so that it is well distributed. [5]
    • Make sure to apply light to medium pressure as you work in the product.
  5. After you have finished buffing the scratched area, use a clean microfiber cloth to wipe away the excess product. Buff the surface of the car where you applied the product using a circular motion. [6]
    • Do not allow the excess product to dry on the surface of your car.
    • Check the manufacturer’s instructions to be sure about how to remove the excess product.
  6. Check the area to see if the scratches are still visible. If they are, then you can repeat the product application 2 to 3 times. Just be careful not to do this too many times or you may damage the clear coat on your car.
    • Check the manufacturer’s instructions before proceeding with another application.
    7. Advertisement
Method 3
Method 3 of 3:

Painting to Fix Deep Scratches

PDF download Download Article
  1. If your car is dirty during scratch repair, that dirt could create more scratches. Wash your car thoroughly to remove all of the dirt and debris. You may want to rinse the scratched area a couple of extra time to be certain that it is clean.
    • Pay particular attention to the area you will be repairing. Spray the scratched area with water, making sure to get any debris out of the scratch. Then, clean the area well with soap formulated for use on cars and rinse it all away with clean water.
  2. Sand the scratched area to strip away the top layers of paint. Wrap 2000-grit wet/dry sandpaper around a sanding pad (a holder for the sandpaper with a handle on it) and begin sanding the scratched area. [7] Sand for 10 to 15 seconds at a time and then check the area to see if you need to sand deeper.
    • Always sand in the direction of the scratch. You do not want to create opposing scratches, which will only add more ridges and valleys in the paint that need to be repaired.
    • Rinse the area with water as needed to check your progress. This will allow you to better see if you have gotten to the bottom of the scratch.
    • If the scratch is slightly deeper than the clear coat, use 1500-grit sandpaper to level the surface and then 2000-grit sandpaper to remove the scratches made by the coarser sandpaper.
    • Avoid getting dirt or debris between the sandpaper and the vehicle. This will cause scratching.
  3. Rinse away the debris left by sanding the scratched area. Then, use a clean microfiber cloth to wipe the surface dry.
    • Avoid using old or dirty rags since these could cause more scratches on the surface of your car.
  4. Get some sandable primer in an aerosol can. Spray the primer onto the area you have just sanded. Use a back and forth motion to spray on the paint. Then, wait 5 to 10 minutes for the primer to dry and spray on another layer. Do this a total of 3 times. [8]
    • Choose a primer that is close to the color of your car’s paint, if possible. It will not be an exact match, but your paint will be.
  5. Next, spray on the same color paint as is on the rest of your car to the area where you applied the primer. Wait 5 to 10 minutes between each application so that the paint dries completely. [9]
    • To ensure that the paint will match, check with your car’s manufacturer to get the same shade of paint. You may be able to purchase the paint from an auto supply store, or you may have to special order the paint from your car’s manufacturer.
  6. Apply a high-quality carnauba wax to the surface of your car and then buff the area with a buffer pad or microfiber cloth. You can purchase a waxing kit that includes everything you need to wax your car , such as the wax and a buffing pad or microfiber cloth.
    • Apply a quarter-size amount of wax to the buffing pad or cloth to start and add more if needed.
    • Use circular motions and press down on the pad or cloth with medium pressure.
    • Keep going until the wax is evenly distributed and the car’s surface looks shiny.
    7. Advertisement


Community Q&A

Search
Add New Question
  • Question
    What is a good quality rubbing compound for scratches?
    Community Answer
    Meguiar’s Ultimate Compound -- this is the best on the market.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 74 Helpful 109
  • Question
    How can I remove scratches from a car bumper?
    Cleton Dias
    Community Answer
    As bumpers are fiber you can't repair them much, but if the scratch is minor you can try the above method and see.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 30 Helpful 49
  • Question
    I have been using T-Cut, but it seems to leave a faded area around it. What should I do?
    Community Answer
    The best one to use is Meguiar’s Ultimate Compound -- try switching to that.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 72 Helpful 46
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If the scratches in your car's paint are deep or excessive, you may want to consider going to a body shop to get them repaired. Auto body shops have the professional set up and know-how to give your car a beautiful, shiny new surface.
        Thanks
        Helpful 5 Not Helpful 3
      Advertisement

      Things You'll Need

      Using Toothpaste for Surface Scratches

      • Soap
      • Hose
      • Sponge
      • Microfiber towels
      • Toothpaste

      Using a Scratch Removal Product for Small Scratches

      • Soap
      • Hose
      • Sponge
      • Microfiber towels (to dry your car)
      • Scratch removal kit
      • Buffing pad or microfiber towel

      Painting to Fix Deep Scratches

      • Soap
      • Hose
      • Sponge
      • Microfiber towels (to dry your car)
      • 1500- and 2000-grit sandpaper
      • Sanding pad
      • Sander
      • Sandable spray primer
      • Spray paint that matches your car’s existing paint
      • Car wax

      You Might Also Like

      How to
      Safely Remove Fine Scratches from Your Car's Paint
      How to
      Touch up Scratches on Your Car
      How to
      Remove Tree Sap From Your Car
      How to
      Buff a Car
      Best Ways to Clean the Outside & Inside of Your Car
      How to
      Fix Alloy Rim Scratches
      How to
      Use Household Ingredients to Clean Your Car
      How to
      Deodorize Your Vehicle with an Ozone Generator
      How to
      Polish a Car
      How to
      Use a Rubbing Compound
      How to
      Buff Clear Coat
      How to
      Clean Fuel Injectors
      The Best Ways to Clean the Inside of Your Windshield
      How to
      Remove Emblems From Cars
      Advertisement

      References

      1. ↑ https://www.racv.com.au/royalauto/transport/cars/how-to-remove-scratches-from-car.html
      2. ↑ https://www.youtube.com/watch?v=m6i8rBrv9Es&feature=youtu.be&t=36s
      3. ↑ https://www.youtube.com/watch?v=m6i8rBrv9Es&feature=youtu.be&t=1m6s
      4. ↑ https://www.youtube.com/watch?v=m6i8rBrv9Es&feature=youtu.be&t=1m2s
      5. ↑ https://www.youtube.com/watch?v=m6i8rBrv9Es&feature=youtu.be&t=1m30s
      6. ↑ https://www.youtube.com/watch?v=m6i8rBrv9Es&feature=youtu.be&t=2m7s
      7. ↑ https://www.youtube.com/watch?v=Zl_iSYYGBiY
      8. ↑ https://www.youtube.com/watch?v=Zl_iSYYGBiY
      9. ↑ https://www.youtube.com/watch?v=Zl_iSYYGBiY
      1. Videos provided by milanmastracci

      About This Article

      Article Summary X

      To remove a surface-level scratch from your car, try using non-gel toothpaste. First, spread a thick layer of the toothpaste over the scratch with a cloth. Then, use a clean toothbrush to work the toothpaste into the scratch. When you've thoroughly brushed the area, rinse off the toothpaste, and the scratch should be gone. For deeper scratches, try using sandpaper. First, sand the scratched area with 2000-grit sandpaper until the surface of your car feels rough. Then, rinse off the area and wipe it dry with a cloth. Next, spray the area you sanded with auto-body primer, and let it dry for 20 to 30 minutes. Once it’s dry, spray the area with auto-body paint that matches the color of your car. Finally, seal the paint with wax or polish. If nothing else is working, try using a car scratch remover kit. For more details about how to use each of these methods, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 2,774,649 times.

      Reader Success Stories

      • Pat Garverick

        Sep 9, 2016

        "The most helpful part is the picture showing the guy using the orbital sander with the relatively small head. It ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement