How to Safely Remove a Light Fixture

PDF download Download Article
Removing a light fixture is easy with our simple steps
PDF download Download Article

Need to remove a light fixture? We can help! Before you begin working on a light fixture, always turn the power off first. Remove the light shade or bowl, unscrew the light bulbs, and take off the fixture plate to expose the wires. Then work on installing the new fixture. Live wires are dangerous, so always use a voltage detector to test any wires first and contact an electrician at any stage if you don't feel confident.

Things You Should Know

  • Ensure the power is off and unscrew the exposed light bulb. Then, remove the knob, screws, or bolts with a screwdriver or drill to extract the fixture cover.
  • Remove the light bulb(s) from the fixture plate by gently twisting each light bulb counterclockwise.
  • Use a screwdriver to remove the screws holding the mounting bracket to the fixture plate. With the fixture plate removed, keep the power off until your new fixture is safely installed.
Method 1
Method 1 of 2:

Removing the Light Fixture

PDF download Download Article
  1. Turn off the power at the fuse box . [1] Open the fuse box and locate the breaker that corresponds to the circuit that powers the light fixture. The circuits in the fuse box are often labeled by room. If the circuits are not labeled or if you don’t know the switch for the circuit that you will be working on, turn off the power for the entire home to be on the safe side. [2]
    • Working with electrical wiring can be a dangerous task. It's essential that all of your equipment is in good working order to keep yourself safe.
  2. Once you have turned off the circuit at the fuse box, double check that it was the correct circuit before you begin working. Press the light switch into an on and off position several times. Ensure that the light doesn’t turn on and that it remains off for the entire time. Never work on a light fixture if the power is on. [3]
    • If you cannot find the switch for the individual circuit that you will be working on, either turn off the power for the entire home or contact an electrician to remove the light fixture for you.
    • Wear a headlamp if it is too dark to see what you are doing without the light on.
    Advertisement
  3. Place the ladder on a flat, stable surface either directly below or next to the fixture. Twist each bulb counterclockwise to remove them from chandeliers and Hollywood light fixtures. For fluorescent light boxes, slide the cover out of place if there is one. Then rotate each bulb counterclockwise until it loosens and can be lifted out of place. [4]
    • Chandeliers, Hollywood lights, and fluorescent light boxes all have bulbs that need to be removed before you can remove the fixture cover.
  4. For flush-mount lights, gently twist the knob in the center of the fixture cover counterclockwise to unscrew it. For Hollywood lights and chandeliers, use a screwdriver or a drill to remove the screws on the base of the fixture. For lights with bolts, unscrew each bolt while supporting the cover to lift it down from the ceiling. [5]
    • Always support the fixture cover during the process. Lift it away from the fixture plate once it is loose to stop it falling. Get another person to help you hold the fixture if it's heavy.
    • Some light fixtures require you to twist the cover to remove it from the fixture plate. Try this method if simply unscrewing the knob or screws doesn't work. [6]
    • Sometimes light covers can stick to the ceiling due to paint. Use a flat screwdriver to carefully pry the light shade free from the ceiling, just as you would open the lid of a paint can. [7]
    • Move your head so that it’s not directly underneath the light cover as you remove it, as sometimes dust or dead bugs may fall out.
  5. Gently twist each light bulb counterclockwise to unscrew it. Set the bulbs to one side as you may be able to use these for your new light fixture. [8]
    • Hollywood lights and chandeliers don't have bulbs in the fixture plate as these are located on the light cover and have already been removed. [9]
  6. Use a screwdriver to remove the screws that hold the mounting bracket to the fixture plate. Hold the fixture plate as you loosen the screws in the mounting bracket to prevent it falling from the ceiling. Since the light fixture is now fully removed, keep the power switched off until a new fixture is safely installed. [10]
    • The mounting bracket is a long, thin piece of metal that runs across the fixture plate to mount it onto the ceiling.
    • You will see many exposed wires once the fixture plate is removed. Don't touch these until you have used a voltage detector to test them first.
    7. Advertisement
Method 2
Method 2 of 2:

Wiring and Installing a New Light Fixture

PDF download Download Article
  1. [11] Place the tip of the non-contact voltage detector on the insulation of each wire that you can see. Ensure that the non-contact voltage detector doesn’t glow as this means that it is safe to continue working. The non-contact voltage detector will glow or make a chirping sound whenever it is close to a live wire. If you find a live wire, stop working on the light fixture immediately and contact an electrician, as live wires are dangerous due to the risk of shock. [12]
    • If you haven't used the non-contact voltage detector for a while, test that it works properly first. Hold it near a light bulb that is on and check that it indicates a voltage. Replace the batteries in the non-contact voltage detector if necessary.
    • Always follow the directions that come with your non-contact voltage detector. For your reference, the white wire is neutral, the black wire is hot, and the copper or green wire is ground. [13]
  2. It is necessary to separate the wires so that you can easily install a new light fixture. If there is a wire nut holding the wires together, turn it counterclockwise to unscrew it by hand. Unwrap each wire and make sure that they aren’t tangled. Sometimes wires are bundled together with electrical tape, so remove this if necessary to separate the wires. [14]
    • Use needle nose pliers to separate the wires if you are having trouble. [15]
    • Put the wire nuts right back on the wires when you're done. That way there's no possible way of getting electrocuted. [16]
  3. Install a new light fixture . Follow the directions closely that come with the new light fixture. Connect the wires in the ceiling to the new fitting as per the instructions, taking care to match up the right ones. Bundle the appropriate wires together using a wire nut and then cover the wire nut in electrical tape. Screw the fixture plate, light bulbs, and light shade onto the ceiling according to the manufacturer's instructions. [17]
    • Although it’s uncommon, some light fittings have several wires rather than just 3. Contact an electrician if this is the case, rather than trying to install a new fixture yourself as it can be easy to make a mistake. [18]
    • Turn the wire nut clockwise to tighten it.
    • After assembling the new light fixture, turn the power back on to test it out.
    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Do I need to use a voltage tester?
    Allen Lee
    Home Improvement Specialist
    Allen Lee is a Home Improvement Specialist and the Owner of Honest Lee Handyman Services, a licensed and insured handyman business servicing Sacramento, California, and surrounding areas. Working with homeowners and businesses to get their small repairs done in a timely and efficient manner, Honest Lee Handyman Services provides gutter and dryer vent cleaning along with fixture, fence, drywall, and toilet repairs.
    Allen Lee
    Home Improvement Specialist
    Expert Answer
    It's optional, but I strongly recommend using one just to be totally sure there's no electricity reaching the wires.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Although there are many different types of light fixtures, the basic procedure tends to remain the same when removing each type. Remove the light shade or bowl first, then the bulbs, and then the fixture plate to expose the wires.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You’ll Need

      • Headlamp
      • Ladder
      • Screwdriver
      • Non-contact voltage detector
      • Needle nose pliers
      • New light fixture
      • Wire nuts
      • Electrical tape

      You Might Also Like

      Easiest Way to Install LED Strip Lights
      How to
      Test LED Lights
      How to
      Cut Led Strip Lights
      How to
      Make a Homemade Flashlight
      How to
      Daisy Chain Lights
      How to
      Hang Fairy Lights
      How to
      Install a New Light Fixture
      How to
      Wire a Light
      How to
      Install a New Ceiling Light Fixture
      How to
      Install a Pendant Light
      How to
      Connect LED Strip Lights
      How to
      Test Fluorescent Bulbs
      How to
      Replace a Fluorescent Light Cover, Tube, or Fixture
      How to
      Replace a Recessed Bulb (Without Removing the Fixture!)
      Advertisement

      References

      1. ↑ Allen Lee. Home Improvement Specialist. Expert Interview. 10 July 2020.
      2. ↑ https://www.apartmenttherapy.com/how-to-remove-a-light-fixture-176020
      3. ↑ http://www.planitdiy.com/how-to/electrical/how-to-replace-a-light-fixture/
      4. ↑ https://www.familyhandyman.com/electrical/fluorescent-light/how-to-replace-a-fluorescent-light-ballast/view-all/
      5. ↑ http://www.planitdiy.com/how-to/electrical/how-to-replace-a-light-fixture/
      6. ↑ https://www.apartmenttherapy.com/how-to-remove-a-light-fixture-176020
      7. ↑ https://manoffamily.com/how-to-open-a-paint-can/
      8. ↑ https://www.apartmenttherapy.com/how-to-remove-a-light-fixture-176020
      9. ↑ https://www.prettyhandygirl.com/how-to-install-a-chandelier/
      1. ↑ https://www.prettyhandygirl.com/changing-out-a-light-fixture-bye-bye-hollywood-strip-light/
      2. ↑ Allen Lee. Home Improvement Specialist. Expert Interview. 10 July 2020.
      3. ↑ https://www.familyhandyman.com/electrical/how-to-use-cheap-electrical-testers/view-all/
      4. ↑ https://www.apartmenttherapy.com/how-to-remove-a-light-fixture-176020
      5. ↑ https://www.apartmenttherapy.com/how-to-remove-a-light-fixture-176020
      6. ↑ http://www.planitdiy.com/how-to/electrical/how-to-replace-a-light-fixture/
      7. ↑ Allen Lee. Home Improvement Specialist. Expert Interview. 10 July 2020.
      8. ↑ http://www.planitdiy.com/how-to/electrical/how-to-replace-a-light-fixture/
      9. ↑ https://www.finehomebuilding.com/membership/pdf/20751/021190076.pdf/
      10. ↑ Allen Lee. Home Improvement Specialist. Expert Interview. 10 July 2020.
      11. ↑ https://www.apartmenttherapy.com/how-to-remove-a-light-fixture-176020

      About This Article

      Thanks to all authors for creating a page that has been read 95,005 times.

      Did this article help you?

      Advertisement