How to Remove a Stuck Bolt

PDF download Download Article
PDF download Download Article

In most cases, you can remove a bolt by unscrewing the nut from the bolt with a wrench. If the bolt is rusted or otherwise stuck in place, however, you’ll need to find another way to remove the bolt. If the hexagonal surfaces of bolt and nut haven’t been stripped, try heating the bolt with a propane torch to loosen it. In some cases, truly stuck bolts cannot be removed and need to be cut off instead. Purchase all of the supplies you’ll need at a large hardware store or a home-improvement store.

Things You Should Know

  • Lubricate the bolt with WD-40 and use vice-grip pliers or a long wrench to twist loose. Heat it with a torch for 15 seconds to loosen it more if needed.
  • For rust, apply rust-penetrating liquid thread loosener and strike the the bolt 6-12 times with a hammer. Twist loose with a long-handled socket wrench.
  • If a screw extractor can’t get the bolt out, cut the screw off with a reciprocating saw.
Method 1
Method 1 of 4:

Loosening a Bolt with a Wrench or Pliers

PDF download Download Article
  1. [1] Penetrating oils like WD-40 will seep beneath the head of the bolt and under the nut and help to lubricate the threading on the bolt. This will make the bolt easier to loosen and will be especially useful if the bolt is rusted in place. Give the oil at least 20 minutes to soak in. [2]
    • Purchase a penetrating oil at any hardware store. You might be able to find it at a large supermarket also.
  2. Use a piece of metal that’s at least 2 feet (0.61 m) long. This will effectively lengthen your wrench by 2 feet (0.61 m) and will give you more torque when you try to remove the stuck bolt. [3]
    • You can find hollow metal bars at large hardware or home-improvement stores. Look for a bar that has a hollow inner diameter of at least 3 ⁄ 4  in (19 mm).
    • If you like, bring your box-end wrench with you to the hardware store to make sure its handle fits inside of the metal bar you choose.
    • Be aware that using a hollow bar to increase the torque of your wrench may damage or snap the wrench.
    Advertisement
  3. Hook the end of your box-end wrench around the head of the stuck bolt, and hold the wrench at the very end of the extender bar. With your other hand, grip the nut with a large pair of pliers. Pull sharply on the end of the wrench to try to loosen the stuck bolt. Ideally, the penetrating spray will have weakened the bolt’s resistance so that it loosens. [4]
    • If it’s too awkward to hold both the wrench and pliers at once, ask a friend or family member to help you by holding the pliers.
  4. If the sharp hexagonal sides of the stuck bolt have been stripped and rounded , a box-end wrench will slip off when you try to loosen the bolt. Vice-grip pliers have teeth on the inside of their rounded jaws and can be fastened tightly around the flat surfaces of a stripped bolt. [5]
    • You should be able to slip a hollow piece of metal over the end of vice-grip pliers just as you would over any other wrench.
    5. Advertisement
Method 2
Method 2 of 4:

Heating the Bolt to Loosen It

PDF download Download Article
  1. If the bolt doesn’t budge when you try loosening it with the extended wrench, it’s time to try using heat to un-stick the bolt. Turn on a propane torch, and hold the flame about 1 ⁄ 2 inch (13 mm) away from the bolt. Keep the flame on the bolt for about 15 seconds. [6]
    • The heat from the propane torch should cause the bolt to expand.
  2. Once you’ve applied the flame to the bolt and it’s begun to expand, switch and heat the nut for 15 seconds. Alternate between the nut and bolt for about 2 minutes total. The end of the bolt that you’re not applying flame to will contract and the end that you’re heating will expand. This will change the overall shape of the bolt. [7]
    • Ideally, the bolt’s expansion and contraction will break whatever corrosion holds it in place.
  3. Insert the end of your box-end wrench into a hollow metal bar. Hook the wrench onto the bolt and grasp the nut with a pair of large pliers. Hold the nut in position and pull on the end of the wrench. Give 4-5 sharp tugs and see if the bolt moves. [8]
    • If the bolt still doesn’t loosen, heat it with the propane torch for another 10 minutes, or move on to another method.
    4. Advertisement
Method 3
Method 3 of 4:

Removing a Rusted Bolt

PDF download Download Article
  1. Take a stiff-bristle wire brush and brush it aggressively against the rust crusted on the stuck bold (and corresponding nut). It’s next to impossible to remove a bolt that’s fully rusted in place, so scrub for 4-5 minutes until you’ve scraped off nearly all of the rust. [9]
    • Large hardware stores may sell wire brushes specifically designed for stripping rust.
  2. Once most of rust has been stripped away, douse both ends of the bolt with liquid thread loosener. Let the liquid soak into the metal and work its way beneath the head of the bolt for about 30 minutes. Effective brands of rust-penetrating lubricants include Liquid Wrench, PB Blaster, and Royal Purple Maxfilm. [10]
    • Do not use WD-40 for this. While it’s an effective lubricant, it’s not effective at penetrating through layers of rust.
  3. Once the rust-penetrating thread loosener has loosened up the rusted bolt, hit it with a hammer to jar the bolt out of the position its stuck in. Blows from a hammer can also create micro-fractures throughout the bolt, making it easier to remove. [11]
    • Vary the position of your hammer blows so they’re not all in 1 place. Hit near all 6 sides of the stuck bolt at least once.
  4. The wrench’s long handle will give you more torque than a typical short-handled wrench. Hold on the very end of the wrench and pull by exerting constant, steady pressure. [12] With enough force, the bolt should loosen and unscrew.
    • If you’re not sure of the size of the bolt, try 3-4 different sizes of socket on the bolt until you find 1 that fits best.
    5. Advertisement
Method 4
Method 4 of 4:

Destroying a Stuck Bolt

PDF download Download Article
  1. [13] Find a correctly-sized screw extractor that can remove your stuck bolt by measuring the diameter of the threaded portion of the bolt. Take this measurement to a hardware store and find a screw extractor that’s about 1 ⁄ 7 inch (0.36 cm) narrower.
    • If you have the bolt measurement, the sales staff can help you find a correctly sized extractor.
  2. [14] A screw extractor is a long, thin piece of threaded metal that screws into an ordinary power drill. Set the point of the extractor into the center of the bolt, and slowly squeeze the power drill’s trigger. Drive the screw extractor down through the shaft of the bolt, and let it unscrew the bolt from within. [15]
    • Although this will destroy the bolt, it should make it much easier to remove.
  3. If the screw extractor doesn’t remove the stuck bolt itself, pull the bolt out with a wrench. Set the end of a box wrench over the head of a drilled-out bolt and turn it counterclockwise to loosen the bolt. [16]
    • If the screw extractor shattered the bolt and pieces of the bolt are left inside the material that the bolt was screwed through, you may need to give the bolt head and nut a few blows with a hammer to remove them.
  4. If the screw extractor fails to pull out your screw—or if the screw is too rusted for the extractor to penetrate—your only other option is to cut the bolt off of whatever it’s attached to. Insert a hacksaw blade into the reciprocating saw, and press the blade against the shaft of the stuck bolt. Turn the saw on, and cut through the bolt and the shaft. [17]
    • Keep your fingers and hands clear of the blade when cutting through a stuck bolt.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you get a stuck bolt off?
    Barry Zakar
    Handyman
    Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.
    Barry Zakar
    Handyman
    Expert Answer
    I suggest first spraying the bolt with WD-40 to see if that loosens it up. If not, you may need to use a tool, like a cold chisel, to knock off the head of the bolt so you can remove it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 13
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Things You’ll Need

      Loosening a Bolt with a Wrench or Pliers

      • Penetrating spray
      • Box-end wrench
      • Hollow metal bar
      • Large pliers
      • Vice-grip pliers

      Heating the Bolt to Loosen It

      • Propane torch
      • Box-end wrench
      • Hollow metal bar
      • Large pliers

      Removing a Rusted Bolt

      • Wire brush
      • Rust-penetrating liquid thread loosener
      • Hammer
      • Long-handled socket wrench

      Destroying a Stuck Bolt

      • Power drill
      • Screw extractor
      • Box-end wrench
      • Hammer (optional)
      • Reciprocating saw
      • Hacksaw blade

      Tips

      • A cold chisel is another useful tool for knocking off the head of a stuck bolt. [18]
        Thanks
        Helpful 0 Not Helpful 0
      • If you’re dealing with a very large stuck bolt—say, one that’s larger than 2 inches (5.1 cm) across—try using a pipe wrench. This will give you plenty of torque, and the wrench’s jaw teeth will clamp firmly on even the most stubborn bolts. [19]
        Thanks
        Helpful 1 Not Helpful 0
      • A screw extractor is your best bet for removing a bolt whose head has been knocked completely off or flattened. [20]
        Thanks
        Helpful 0 Not Helpful 1
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Exercise caution with using a propane torch. The flame burns extremely hot, so never point it towards your face or hands.
        Thanks
        Helpful 3 Not Helpful 0
      • Propane is highly flammable. Store propane in a cool environment away from any open flames or other sources of heat.
        Thanks
        Helpful 2 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Undo Zip Ties Without Breaking Them
      How to
      Set and Use a Torque Wrench
      How to
      Remove Rivets
      How to
      Calibrate a Torque Wrench
      How to
      Make Velcro Stick Again
      How to
      Easily Load a Packing Tape Gun
      How to
      Hang Something on Brick
      The Easiest Ways to Apply Command Strips or Hooks at Home
      Best Ways to Remove a Snapped Off Bolt
      How to
      Make the Coolest Rubber Band Ball Ever
      How to
      Clean Velcro & Make It Stick Again
      How to
      Use Lock Washers
      How to
      Install Grommets
      How to
      Use a Rivet Gun
      Advertisement

      References

      1. ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
      2. ↑ https://www.todayshomeowner.com/video/how-to-loosen-a-stuck-nut-or-bolt/
      3. ↑ https://www.todayshomeowner.com/video/how-to-loosen-a-stuck-nut-or-bolt/
      4. ↑ https://www.todayshomeowner.com/video/how-to-loosen-a-stuck-nut-or-bolt/
      5. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      6. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      7. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      8. ↑ https://www.todayshomeowner.com/video/how-to-loosen-a-stuck-nut-or-bolt/
      9. ↑ https://www.popularmechanics.com/home/how-to/a5754/how-to-free-a-rusted-bolt/
      1. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      2. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      3. ↑ https://www.popularmechanics.com/home/how-to/a5754/how-to-free-a-rusted-bolt/
      4. ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
      5. ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
      6. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      7. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      8. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      9. ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
      10. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/
      11. ↑ https://www.familyhandyman.com/automotive/how-to-loosen-stuck-bolts/view-all/

      About This Article

      Article Summary X

      To remove a stuck bolt, spray some penetrating oil like WD-40 around the head of the bolt. Let the oil soak for about 20 minutes so it can lubricate the threading on the bolt and make it easier to remove. Then, take a box-end wrench and slide a hollow metal bar over the handle so you can add length and give you more torque to turn the wrench. Fit the wrench over the head of the stuck bolt and hold it at the very end of the bar. Pull sharply on the end of the bar to try to loosing the bolt. After the bolt breaks loose, slide the hollow metal bar off and continue to rotate the wrench until the bolt is removed. For more tips about how to remove a stuck bolt, like using a pair of vice-grip pliers for stripped bolts, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 458,495 times.

      Did this article help you?

      Advertisement