Download Article
Unscrew the most stubborn screws with or without a toolkit
Download Article
Stripped, or stuck, screws can quickly derail your projects! When removing a stuck screw, remain patient. When one method doesn’t work, don’t give up! Take a deep breath, gather a new set of tools, and try an alternative method.
If you're dealing with a stripped screw, you can read How to Remove a Stripped Screw ; if it's a one-way screw, see How to Remove a One-Way Screw .
Unscrewing a Stripped or Stuck Screw
Use a shorter screwdriver with a larger head to apply downward pressure to the screw. Or, try rotating the screw with pair of pliers. If the screw still won’t budge, attempt to loosen its grip by applying a lubricant like WD-40.
Steps
-
Switch screwdrivers . When a screw is stripped, attempt to remove it with a different screwdriver.- First, try using a shorter screw driver with a larger head. Apply downward pressure and slowly attempt to remove the screw.
Tip: If this doesn’t work, try using a screwdriver with a different type of head. For instance, if the screw is a philips head, try a flathead screwdriver intead. When using a flathead screwdriver, it must be narrow enough to fit inside the entire hole. Apply downward pressure and try to extract the screw. [1] X Research source
-
Tap the screwdriver into the head with a hammer. Place your screwdriver into the head. Grab a hammer and tap the base of the screwdriver. This will lodge your screwdriver into the head, providing you with more grip. Set down the hammer and attempt to remove the screw. [2] X Research source- This method works best with soft-metal screws.
Advertisement -
Remove the screw with a pair of pliers. If there is a slight gap between the surface and the head of the screw, try rotating the screw out with a pair of pliers, vise (American English) or vice (British English) grips. Secure the screw within the mouth of the locking pliers. Rotate the pliers and try to turn the stuck screw out. [3] X Research source
-
Drill a small hole into the head with an electric drill. [4] X Expert Source Barry Zakar
Handyman Expert Interview. 20 August 2020. Select the correct drill bit and power up your electric screwdriver. Carefully drill a small, shallow hole into the head. This will allow your screwdriver to sit deeper in the head of the screw. Retrieve your screwdriver and insert it into the head. Apply downward force as you attempt to remove the screw . [5] X Research source -
Use a Dremel . Attach a metal cutting disc to the Dremel, or small electronic rotator. Power up the tool and cut a new notch in the screw head. Grab a flathead screwdriver and put it in the newly cut slot. Rotate the screwdriver and try to remove the striped screw. [6] X Research source
Advertisement
-
Drill a pilot hole in the head. Use an electric drill to create a ⅛ inch hole in the center of the head. Increase the size of the drill bit by 1/16 inch and make the hole larger. Continue to increase the size of the drill bit by 1/16 and enlarge the hole until it is the diameter of the screw extractor . Keep the drill in the center of the screw. [7] X Research source
- Note the recommended depth for you specific screw extractor. Don’t make the hole deeper than recommended.
-
Insert the extractor. [8] X Expert Source Barry Zakar
Handyman Expert Interview. 20 August 2020. Insert the extractor into the hole you created. Lightly tap it into the screw with a hammer—make sure the extractor’s threads grip the sides of the screw before proceeding. Locate a T handle—it likely came in your extractor kit—and attach it to the top of the extractor. [9] X Research source -
Turn and remove the screw. Keep the extractor straight while turning it counter-clockwise. Avoid applying any lateral pressure to the extractor as this can cause it to bend. Continue turning the screw until it loosens. Pull up on the extractor to bring the screw to the surface. Pull the screw from the surface with a pair of pliers. [10] X Research source
Advertisement
Method 3
Method 3 of 4:
Improving the Screwdriver’s Grip with Non-traditional Items
Download Article
-
Use a rubber band . To improve your screwdriver’s grip on the head, insert a wide rubber band between the screwdriver and the screw head. Place the rubber band flat against the head and insert your screwdriver. Slowly turn the screw driver and attempt to remove the screw. [11] X Research source
-
Use steel wool. When you can’t find a rubber band, you can substitute steel wool. Place the steel wool on top of the head. Insert your screwdriver firmly into the hole. Rotate the screwdriver slowly and try to remove the screw. [12] X Research source
-
Apply a lubricant. Spray the screw head with a rust penetrant. Allow the rust penetrant to sit for 15 minutes. Reapply the rust penetrant. Tap the stripped head 5 to 6 times with a hammer. Retrieve your screwdriver and attempt to remove the screw. [13] X Research source
- If you are unable to remove the stuck screw, apply a valve grinding compound. This product contains grit that will allow your screwdriver to grip the head. Insert your screwdriver into the head and try removing the screw.
Advertisement
-
Gather the supplies. Even if you are not a skilled welder, it is possible to adhere a nut to the stripped screw head. Purchase a super strong welding adhesive. Find a nut that is the same diameter as the screw head. -
Adhere the nut to the head. Place the nut on the screw head, making sure it is centered. Carefully fill the nut with the super strong welding adhesive. Allow the product to dry the recommended amount of time.
-
Remove the screw. Make sure the nut has completely adhered to the screw. Grab a socket wrench and place it on the nut. Rotate the socket wrench and remove the stripped screw from the surface.
Advertisement
Expert Q&A
Search
-
QuestionHow do you unscrew a broken screw?Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.I suggest trying to drill it out. If that doesn't work, put in a new screw and patch the hole where the old screw was.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Try wrapping a rubber/elastic band around the screwdriver. This can improve your grip as you twist the screwdriver.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- Try using an electric screwdriver or battery-powered drill with a slip clutch. You'll be able to put more pressure on the electric tool then you would on a handheld one.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://removeandreplace.com/2014/04/27/10-easy-ways-to-remove-a-stripped-screw/
- ↑ https://www.youtube.com/watch?v=_mTFQbaT3Zc
- ↑ https://www.tradeskills4u.co.uk/posts/remove-a-stripped-screw
- ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
- ↑ https://removeandreplace.com/2014/04/27/10-easy-ways-to-remove-a-stripped-screw/
- ↑ https://www.tradeskills4u.co.uk/posts/remove-a-stripped-screw
- ↑ https://removeandreplace.com/2014/04/27/10-easy-ways-to-remove-a-stripped-screw/
- ↑ Barry Zakar. Handyman. Expert Interview. 20 August 2020.
- ↑ https://www.tradeskills4u.co.uk/posts/remove-a-stripped-screw
About This Article
Article Summary
X
To remove a stuck screw, place a rubber band or a piece of steel wool on top of the screw head before you try unscrewing it, which will give the screwdriver something to grip onto. You can also tap the screwdriver into the screw head so it has a better grip. If that doesn't help, try grabbing onto the screw head with a pair of pliers and then twisting the screw out. To learn other ways you can remove a stuck screw, like drilling a small hole in the screw head, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,752,434 times.
Reader Success Stories
- "I was trying to remove and replace the handles on my kitchen units. Just one refused to budge, no matter how hard I tried. I used a combination of the lubricant and tapping with a hammer. Voila!" ..." more
Advertisement
"I was trying to remove and replace the handles on my kitchen units. Just one refused to budge, no matter how hard I tried. I used a combination of the lubricant and tapping with a hammer. Voila!"
..."
more
"I was dealing with a stubborn screw and read the list of options from wikiHow on ways to not damage the screw. I chose placing a rubber band on the screw as I turned the screwdriver. It worked!"
..."
more
"When rubber bands were mentioned, it gave me the idea to use one on the screwdriver to improve my grip."
"Liked that there were multiple options. Great to have coverage for, not all problems are the same."
"I used a rubber band to make sure it was more firm and the screw came out without a problem."
