How to Remove a Tub Drain Stopper

PDF download Download Article
PDF download Download Article

Tub drains can quickly become filled with hair and gunk or even get rusty. In order to repair or clean your tub’s drain, you first have to remove the stopper. While there are several kinds of tub stopper, a pair of pliers, a screwdriver, and a suction cup are the most you’ll need to have the stopper disassembled in just a few minutes.

Method 1
Method 1 of 4:

Twisting a Lift-and-Turn or Push-Pull Stopper

PDF download Download Article
  1. If the stopper has a knob coming out of the top, it is almost certainly either a lift-and-turn or push-pull stopper. Both of these varieties can be removed in a similar way, with a twisting motion on either the knob or the whole stopper assembly.
    • The main difference between lift-and-turn and push-pull stoppers is the what you do once you lift them up. As the names suggest, you only have to lift a push-pull stopper, whereas a lift-and-turn stopper must be turned as well.
  2. Underneath the knob, there may be bolt that holds the stopper in place in the drain. In order to access the fastener, remove the knob with a few twists. It may be on loosely, meaning fingers will work just fine, but if it is on too tightly, try using pliers to rotate the knob. [1]
    • Some knobs don’t turn, including many push-pull knobs, so don’t try to twist too hard.
    Advertisement
  3. The bolt will likely stick up where the knob was sitting. The whole plug will pop out in one piece when you have loosened the fastener enough. [2]
    • Closing the drain after removing the knob will help you twist the bolt off more easily.
    • This is more common with push-pull stoppers than lift-and-turn stoppers.
  4. Some stoppers have knobs that are fixed to the base, meaning that the whole stopper must be unscrewed all at once. Use pliers to twist the stopper when you feel it slip into the groove of the drain. The stopper will slip out of the drain in one piece. [3]
    • Lift-and-turn stoppers are often removable with this approach.
    EXPERT TIP

    Greg Jeiranyan

    Licensed Plumber
    Greg Jeiranyan is a Licensed Plumber based in Los Angeles, California. With over 10 years of professional experience, Greg and his team specialize in residential and commercial plumbing service calls. His company, Plumbing Geeks, is rated 5 stars on Yelp and is a family-owned and operated plumbing company. Plumbing Geeks has been serving Los Angeles and its surrounding areas since 2021.
    Greg Jeiranyan
    Licensed Plumber

    Grasp and twist the drain stopper left to remove it. To remove a bottom tub drain stopper, just grasp it firmly and twist left to unscrew from the drain strainer. No special tools needed! This quick tip lets you clean or replace stoppers to keep your tub working properly. Remember "lefty loosey" to undo the stopper.

    5. Advertisement
Method 2
Method 2 of 4:

Unscrewing a Toe-Touch Tub Drain Stopper

PDF download Download Article
  1. This kind of stopper is called a toe-touch stopper, since you can simply press on it with your foot to open and close it. Toe-touch stoppers are one of the simplest to use, but they can be difficult to remove without the right approach.
  2. Pop the stopper up so that water could flow through it, and then grab the cap firmly with your hands or a pair of pliers. You can also press down on the metal ring that the stopper is pressed into when depressed for extra grip. [4]
    • Don’t try to remove a toe-touch stopper while it is in the closed position. It won’t come off and you might scratch the metal.
  3. The metal cap will pop off after a few twists if you are using enough force. If it just rotates without unscrewing, try pulling up vertically as you twist. [5]
  4. Rotate the flat tip of the screwdriver counter-clockwise to unscrew the screw and release the stopper from its position in the drain. You don’t have to remove the screw from the stopper, it simply has to be loose enough to lift. [6]
  5. You can lift the stopper out as one piece, aside from the metal cap you twisted off before. There is no need to disassemble the stopper and you can simply screw it back in when you have finished your repair or cleaning project. [7]
    6. Advertisement
Method 3
Method 3 of 4:

Pulling O-Ring Stoppers Out of a Drain

PDF download Download Article
  1. So-called “Flip-It” and “Press-Flo” stoppers are both brand-name bathtub drain stoppers that can be removed quickly and easily. These stoppers are fixed in place by an o-ring that prevents them from slipping into the drain, and can simply be pulled out.
  2. The lever makes a perfect handle for pulling out a plug. The stopper should lift out of the drain with ease, but if it feels tight, you can jiggle it by the handle until it is loose enough to lift.
  3. This brand-name plug most likely came with a perfectly sized suction cup for you to use, but it may have gotten lost over the years. Any small suction cup will be able to latch onto the stopper when you press on the center. Just pull up on the suction cup to pry the plug out of the drain. [8]
    4. Advertisement
Method 4
Method 4 of 4:

Disassembling Faceplate-Control Drain Stoppers

PDF download Download Article
  1. Usually located below the tub spout, the overflow drain may have a trip lever or the ability to twist. This mechanism is attached to an arm or cable feature that opens and closes the drain stopper. There is typically a grate over the drain with this set-up.
  2. Opening the drain will allow you to remove the drain stopper assembly. If the drain stopper were closed, you would not be able to pull it out all the way through the hole behind the faceplate. [9]
  3. Use a Phillips or flathead screwdriver to rotate both of the screws counter-clockwise to remove them from the faceplate. Unscrew them slowly so that you can avoid dropping any components behind the plate into the tub or drain, particularly if you have removed the metal grate. [10]
  4. The plate you unscrewed from the tub will be attached to an arm or cable mechanism that blocks water from entering the drain pipe below the metal grate in the tub. You simply have to pull the whole assembly out gently through the overflow hole in the tub. [11]
    • Be sure to pull the drain stopper straight away from the wall. The lever assembly will unfold on its own.
    5. Advertisement


Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Use a Ratchet Strap
      How to
      Use a Light Timer
      Homemade Dawn Powerwash: Easy Recipe for Refills
      Moving a Vehicle’s Electric Power Seat Forward or Back Manually
      5 Ways to Reset Any Maytag Washing Machine
      How to
      Make a Smokeless Fire Pit
      How to
      Fix a Leaky Sink Trap
      How to
      Make a Drone
      Safe & Effective Ways to Clean & Unclog Any Sink Drain
      How to
      Clean a USB C Charging Port
      How to
      Paint on Plastic
      How to
      Adjust a Lazy Susan
      How to
      Adjust a Furnace Gas Valve
      How to
      Disassemble and Clean a Honeywell Quietset Tower Fan
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about plumbing, check out our in-depth interview with Greg Jeiranyan .

      References

      1. ↑ https://youtu.be/mnsP8Z953I8?t=19
      2. ↑ https://youtu.be/mnsP8Z953I8?t=33
      3. ↑ https://youtu.be/mqTCZaB1VT0?t=88
      4. ↑ https://youtu.be/xrOIGlPCgtw?t=13
      5. ↑ https://youtu.be/xrOIGlPCgtw?t=13
      6. ↑ https://youtu.be/xrOIGlPCgtw?t=28
      7. ↑ https://youtu.be/xrOIGlPCgtw?t=36
      8. ↑ https://youtu.be/kdLHT1bKySs?t=19
      9. ↑ https://youtu.be/unTzz5b2rFY?t=58
      1. ↑ https://youtu.be/unTzz5b2rFY?t=210
      2. ↑ https://youtu.be/unTzz5b2rFY?t=261

      About This Article

      Thanks to all authors for creating a page that has been read 65,734 times.

      Did this article help you?

      Advertisement