How to Run a Cable Under Carpet

PDF download Download Article
PDF download Download Article

Exposed cables can be bothersome and unsightly. Running cables under carpet is an easy and effective way to stay connected without creating an eyesore in your home. Depending on the space you’re working with, the process of setting up your cables requires only a few tools, including a fish tape or a measuring tape, and pliers.

Part 1
Part 1 of 3:

Preparing the Space

PDF download Download Article
  1. Decide whether to run the cable directly across the room from wall to wall, around the edge for longer cables, or in a pattern that will help avoid major foot traffic.
    • It’s a good idea to make a careful decision about where you want to run your cable, to avoid creating a trip hazard. You may even want to make a sketch of the room before beginning to help you visualize the best spot to place the cable.
    • Try to run the cables as close to the wall as possible so you won't step on them when you're walking. There may even be a hollow space there which will make it easy to tuck the cable out of sight. [1]
    • Avoid placing the cable under heavy furniture, and try to minimize the distance that your cable has to travel.
  2. Use a measuring tape or ruler to find the length of your cable, and compare it to the path you want the cable to take.
    • This is especially important before you start installing the cable under the carpet, so that you avoid losing the cable underneath the carpet, or making any unnecessary incisions in your carpet. [2]
    Advertisement
  3. Cables should be small so as not to cause a trip hazard, and should be non-flammable. Be sure to double check your building’s safety and fire codes before installing cables. [3]
    • To tell if your cable is safe, check that the jacket or the outer layer of the cable is intact, and that there is no exposed wire.
    • Most cable installation under carpeting should be completely safe, but if you're in the attic of an older home, check under the carpet for old electrical wiring before beginning this process, as you will want to avoid overlapping with these wires.
  4. You will need to lift up the carpet along the path of the cable, so be sure to move any furniture that sits on the carpet for your safety and ease. [4]
    • For larger furniture like sofas and coffee tables, it may be useful to enlist a friend's help in safely moving your furniture.
  5. It is important to ensure that the cable is detached from all appliances before running it under carpet in case it pulls on any heavy appliances.
    • If one end of your cable is permanently attached to an appliance, use extra care when pulling the cable under the carpet, and be sure the device is switched to the "off" position.
  6. If you are running your cable along the edge of a carpet where it is held in place by a liner, use a flathead screwdriver to lift up the liner and pull the carpet up slightly along the edge to make space for the cable. [5]
    • Do not completely remove the liner, but rather loosen it enough that you can pull up the carpet that is tucked underneath.
    7. Advertisement
Part 2
Part 2 of 3:

Guiding the Wire

PDF download Download Article
  1. Try to lift only a small section of carpet up. [6] It may be helpful to use pliers to lift the carpet.
    • If your cable is already permanently attached to an appliance, pull up the carpet on the opposite end of the path from where the attached cable is located. This ensures that you can pull the cable back through with ease later on in the installation process.
  2. Fish tape is a tool that is often used for routing wires. To use, simply unwind the reel, and the nylon or steel wire inside should get pushed out. Unwind the wire until it reaches the other side of the room, or the location where you want the cable to emerge from the carpet. [7]
    • The wire from the fish tape should follow the same path where you would eventually like to place your cable. [8]
    • It is helpful to lift the carpet up with your hand at the same time as you unwind the wire and guide it under the carpet. It may be helpful to ask a friend to assist you in lifting the carpet as you go.
    • If you do not have fish tape handy, you can use a measuring tape instead. If you’re using a measuring tape, pull the measuring tape out and push it underneath the carpet along the path that you want the cable to take. [9]
  3. If you are pulling the wire out near a wall, you can use pliers to slightly lift up the carpeting there. If you are hoping to pull the wire through the carpet, you can make a slight incision using a screwdriver or scissors where you want to pull the cable through. [10]
    • If you are using a tape measure, make sure to switch it to the "locked" position so that the tape does not get pulled back through the carpet.
    4. Advertisement
Part 3
Part 3 of 3:

Pulling Through and Attaching

PDF download Download Article
  1. On the end of the fish tape that you just pulled out from under the carpet, there should be a hook which you can attach to your cable. It may be helpful to use a bit of tape to secure the cable to the end of the fish tape.
    • If you are using a tape measure instead, try using duct tape to attach your cable to the end of the measuring tape. [11]
    • Be sure the cable is securely attached to the fish tape or measuring tape so that you don’t lose the cable underneath the carpet and need to start over.
  2. This should pull the cable under the carpet along the path that you made using the the fish tape. Do not stop until you have pulled the cable all the way through the desired path.
    • Apply the same method if you're using a tape measure. [12]
  3. Your cable should now run along your desired path underneath your carpet! You can now hook the cable up as you please.
  4. If you had to loosen your carpet liner to lift up the carpet, retighten it by hitting it gently with a mallet or hammer. [13]
    • In pulling the carpet out, you may have also loosened nails in the floor. Use the hammer or mallet to gently tap on the carpeted area as well, to ensure that the nails are set back in place. [14]
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Will I be able to tell there's a cable under the carpet?
    Jacob Pischer
    Home Improvement Specialist
    Jacob Pischer is a Home Improvement Specialist and the Owner of Helpful Badger, a home repair service in Portland, OR. With over four years of experience, Jacob specializes in a variety of handyman services including pressure washing, cleaning gutters, repairing drywall, fixing leaky plumbing fixtures, and repairing broken doors. Jacob studied at Madison Area Technical College and has a background in real estate investment.
    Jacob Pischer
    Home Improvement Specialist
    Expert Answer
    Yes, and every time you step on it, it's going to hurt. Try to put it as close to the walls as possible so it's not in a walkway. Even better, if you can run it through an exposed basement or a crawlspace, just run the wires underneath your house.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 5
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Fish tape or measuring tape
      • Cable
      • Duct Tape
      • Pliers or flathead screwdriver

      You Might Also Like

      How to
      Wrap Cables
      How to
      Terminate Coaxial Cable
      How to
      Organize Desk Cables
      How to
      Hide a Power Strip
      Advertisement

      References

      1. ↑ Jacob Pischer. Home Improvement Specialist. Expert Interview. 4 September 2020.
      2. ↑ https://www.todayshomeowner.com/how-to-run-wires-in-existing-walls-and-floors/
      3. ↑ https://www.todayshomeowner.com/how-to-run-wires-in-existing-walls-and-floors/
      4. ↑ https://www.youtube.com/watch?v=eqx5f_xdf_Y&feature=youtu.be&t=48
      5. ↑ https://www.youtube.com/watch?v=ZnHTak0PQV0&feature=youtu.be&t=62
      6. ↑ https://www.youtube.com/watch?v=eqx5f_xdf_Y&feature=youtu.be&t=37
      7. ↑ https://www.youtube.com/watch?v=eqx5f_xdf_Y&feature=youtu.be&t=60
      8. ↑ https://www.youtube.com/watch?v=eqx5f_xdf_Y&feature=youtu.be&t=60
      9. ↑ https://www.youtube.com/watch?v=eqx5f_xdf_Y&feature=youtu.be&t=1
      1. ↑ https://www.youtube.com/watch?v=iN8_iULZMQA&feature=youtu.be&t=187
      2. ↑ https://www.youtube.com/watch?v=iN8_iULZMQA&feature=youtu.be&t=283
      3. ↑ https://www.youtube.com/watch?v=eqx5f_xdf_Y&feature=youtu.be&t=96
      4. ↑ https://www.youtube.com/watch?v=ZnHTak0PQV0&feature=youtu.be&t=723
      5. ↑ https://www.youtube.com/watch?v=ZnHTak0PQV0&feature=youtu.be&t=747
      6. ↑ https://www.youtube.com/watch?v=ZnHTak0PQV0&feature=youtu.be&t=136
      7. ↑ Jacob Pischer. Home Improvement Specialist. Expert Interview. 4 September 2020.

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 126,499 times.

      Is this article up to date?

      Advertisement