Download Article
A simple guide to saving and transferring files to and from your flash drive
Download Article
This wikiHow teaches you how to move, save, and download files onto a USB flash drive plugged into your computer.
Saving Files to a Thumb Drive
- Plug your USB drive into you computer.
- Open your computer's file explorer.
- Select your desired file on your computer.
- Copy and paste (CTRL + C) or right click on the file and select "Copy."
- Click on the USB drive in your file explorer.
- Paste (CTRL + V) the file onto the drive.
Steps
-
Locate your computer's USB port. If you have a laptop, the USB ports are probably on the left or right side of the housing. Desktop users may find the USB ports on the back or the front of the desktop tower, though iMacs have the USB ports on the back of the monitor itself. [1] X Research source
-
Determine your computer's USB port type. There are two main types of USB ports found on modern computers:
- USB 3.0 — A thin, rectangular slot that's about 3/4 of an inch (a little under two centimeters) wide. You should see a chunk of plastic in the upper half of this slot. USB 3.0 slots are found on the majority of Windows computers and on most Mac computers manufactured prior to 2016.
- USB-C — A thin, oval slot that's about 1/2 of an inch (a little over a centimeter) wide. These are most commonly found on MacBook and MacBook Pro computers, though some Windows laptops also have USB-C ports.
- If your computer has both types of port, you're free to use whichever port you like depending on your USB flash drive type.
Advertisement -
Figure out which type of flash drive you have. Look at the metal connector end of your flash drive:
- If the connector is rectangular and has a piece of plastic taking up part of the connector, you have a USB 3.0 flash drive.
- If the connector is oval and has no piece of plastic inside of it, you have a USB-C flash drive.
-
Buy and attach an adapter if necessary. If the flash drive that you want to use is a USB 3.0 version but your computer uses USB-C ports, you'll need to buy a USB-C adapter and plug it into the USB-C port on your computer.
- This is most common on MacBooks and MacBook Pros from 2016 and up, though some Windows computers also have only USB-C ports.
-
Plug your flash drive into your computer. If you're using a USB 3.0 flash drive, make sure that the plastic piece in the flash drive's connector is at the bottom of the flash drive so as to slide under the piece of plastic that's at the top of the USB 3.0 port. [2] X Research source
- USB-C flash drives can be inserted either way.
- If you're using a USB-C adapter, you'll plug your USB flash drive into a USB 3.9 slot in the adapter instead.
Advertisement
-
Make sure your USB flash drive is plugged in. If your flash drive isn't plugged into your computer, plug it in before proceeding.
-
Open File Explorer. Click the folder-shaped File Explorer window in the taskbar, or press ⊞ Win + E . [3] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
-
Copy your file. Go to the location of the file you want to copy, then click once the file and press Ctrl + C .
- If you want to copy multiple files, hold down Ctrl while clicking each file you want to copy.
-
Click your flash drive's name. It's in pane on the left-hand side of the File Explorer window, though you may first have to scroll down on the left side of the window.
- If you don't see your flash drive's name, click This PC near the top of the left-hand pane, then double-click your flash drive's name in the "Devices and drives" section.
-
Paste in the file(s). Click a blank space in the flash drive's window, then press Ctrl + V . You should see your copied file(s) appear in the File Explorer window.
- If you want to paste the file(s) inside of a specific folder inside of your flash drive, double-click the folder before pasting in the files.
-
Eject the flash drive before removing it. Ejecting the flash drive causes your computer to save the files on it, thus preventing you from losing your files when you unplug your flash drive: [4] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
- Click the flash drive-shaped icon in the lower-right corner of the screen (you may first have to click here), then click Eject Flash Drive .
-
Remove the USB drive . After ejecting the drive, you can pull it out of your computer by gently tugging on it.
Advertisement
-
Make sure your USB flash drive is plugged in. If your flash drive isn't plugged into your computer, plug it in before proceeding.
-
Copy your file. Go to the location of the file you want to copy, then click once the file and press ⌘ Command + C .
- If you want to copy multiple files, hold down ⌘ Command while clicking each file you want to copy.
-
Open your flash drive. Click your flash drive's name in the lower-left side of the Finder window. You'll find it under the "Devices" heading.
-
Paste in your copied file(s). Press ⌘ Command + V to do so. You should see your copied file(s) appear in the Finder window.
- If you want to paste the file(s) inside of a specific folder inside of your flash drive, double-click the folder before pasting in the files.
-
Eject the flash drive before removing it. Ejecting the flash drive causes your computer to save the files on it, thus preventing you from losing your files when you unplug your flash drive:
- Open Finder, then click the "Eject" icon to the right of the flash drive's name in the bottom-left side of the window.
-
Remove the USB drive. After ejecting the drive, you can pull it out of your computer by gently tugging on it.
Advertisement
-
Make sure your USB flash drive is plugged in. If your flash drive isn't plugged into your computer, plug it in before proceeding.
-
Create your file if necessary. If you're using the program to create a new file to save on your flash drive, create the file before proceeding.
- Skip this step if you just want to create a copy of the file on your flash drive.
-
Open the "Save As" window. If the document hasn't been saved before, you can just press Ctrl + S (Windows) or ⌘ Command + S to bring up this window. Otherwise, do the following: [5] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
- Windows — Click File , then click Save As . If you're using Microsoft Office, double-click This PC after clicking Save As to bring up the File Explorer.
- Mac — Click File , then click Save As... in the resulting drop-down menu.
-
Name your document if necessary. If you want to add a different name to your file, type it into the "File name" (Windows) or the "Name" (Mac) text box.
-
Select your flash drive. Click your flash drive's name in the lower-left side of the window. You may first have to scroll down on the left side.
- On a Mac, you may have to click the Where drop-down box and then click your flash drive's name either in the drop-down menu or on the left side of the Finder window.
-
Click Save . It's in the bottom-right corner of the window. This will cause your file to save onto your flash drive.
-
Eject the flash drive before removing it. Ejecting the flash drive causes your computer to save the files on it, thus preventing you from losing your files when you unplug your flash drive:
- Windows — Click the flash drive-shaped icon in the lower-right corner of the screen (you may first have to click here), then click Eject Flash Drive . [6] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
- Mac — Open Finder, then click the "Eject" icon to the right of the flash drive's name in the bottom-left side of the window.
-
Remove the USB drive. After ejecting the drive, you can pull it out of your computer by gently tugging on it.
Advertisement
-
Make sure your USB flash drive is plugged in. If your flash drive isn't plugged into your computer, plug it in before proceeding.
-
Open your preferred browser. If you want to download a file from the Internet onto your USB flash drive, open a web browser (e.g., Chrome).
-
Make sure download confirmation is enabled. Most browsers will automatically download into your computer's default "Downloads" folder, but you can prompt your browser to ask you where to save your files by doing the following:
- Chrome — Click ⋮ in the top-right corner, click Settings , scroll down and click Advanced , scroll down to the "Downloads" section, and click the "Ask where to save each file before downloading" switch if it's grey.
- Firefox — Click ☰ in the top-right corner, click Options (or Preferences on a Mac), scroll down to the "Files and Applications" section, and check the "Always ask you where to save files" box.
- Edge — Click ⋯ in the top-right corner, click Settings , scroll down and click View advanced settings , and click the grey "Off" switch in the "Ask me what to do with each download" section (if the switch is blue, you're set).
- Safari — Click Safari in the top-left corner, click Preferences... , click the "File download location" drop-down box, and click Ask for each download in the drop-down menu.
-
Go to the file you want to download. In your web browser, navigate to the page or service from which you want to download a file.
-
Click the Download button or link. This will vary depending on what you want to download. Indicating that you want to download a file will prompt a pop-up window to open.
-
Select your USB flash drive. When prompted to select a save location, you'll need to click your flash drive's name in the left-hand menu and then click Save . Doing so will cause the file to download directly onto your flash drive.
- On a Mac, you may click Choose instead of Save .
- If you want to save a file inside of a specific folder inside of your flash drive, double-click the folder before clicking Save .
-
Eject the flash drive before removing it. Ejecting the flash drive causes your computer to save the files on it, thus preventing you from losing your files when you unplug your flash drive:
- Windows — Click the flash drive-shaped icon in the lower-right corner of the screen (you may first have to click here), then click Eject Flash Drive . [7] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source
- Mac — Open Finder, then click the "Eject" icon to the right of the flash drive's name in the bottom-left side of the window.
-
Remove the USB drive. After ejecting the drive, you can pull it out of your computer by gently tugging on it.
Advertisement
-
Ensure the drive isn't full. USB drives tend to fill up quickly—especially older drives that don't have much storage. Try clearing out some files that you don't need if your drive is full.
- You can quickly clear a drive of files by dragging the files in question into your computer's Recycle Bin (Windows) or Trash (Mac).
-
Check the size of the file you are trying to transfer. Many USB drives cannot store files larger than 4 GB. If you need to transfer files larger than this, you'll have to format the USB drive with a different file system. See the next step for details.
-
Format the USB drive . Formatting allows you to change the file system of the flash drive, which is handy if you either need to store files larger than 4 gigabytes or need to set up the flash drive for use on your computer. Formatting will erase the flash drive's contents. [8] X Research source
- If you want to store files larger than 4 gigabytes, select exFAT (Windows) or ExFAT (Mac).
- Flash drives formatted for Windows-only use aren't compatible with Mac computers, and vice versa. Formatting the flash drive for a compatible format will fix this issue.
Advertisement
Community Q&A
Search
-
QuestionCan I add more files to a flash drive that is already holding information, or do I have to format it first?Community AnswerIt depends. If your flash drive has enough space to support more information, then you do not need to format it first. You can just keep adding files to it until it runs out of space. If the information to be added does exceed the storage capacity, you will need to remove some files first, or format the drive to completely remove all existing files.
-
QuestionCan I save items more than once on a USB drive?Community AnswerYes, you can. USB drives are not like DVDs. You can keep adding files to a USB drive until you run out of space. You can also delete files from your USB drive that you no longer need.
-
QuestionWhat if I can't find the USB drive to save to?Community AnswerOpen the Start Menu, click Computer in the right hand pane, and the drive should show up in the Computer Explorer window that opens. It could have various names, but it will be something other than drive C: and the DVD drive. If it doesn't show up, it may have formatting or other issues and the computer isn't reading it.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- You cannot retrieve the prior contents of a formatted flash drive.Thanks
Advertisement
References
- ↑ https://edu.gcfglobal.org/en/windowsbasics/working-with-flash-drives/1/
- ↑ https://edu.gcfglobal.org/en/windowsbasics/working-with-flash-drives/1/
- ↑ https://support.microsoft.com/en-us/windows/find-and-open-file-explorer-ef370130-1cca-9dc5-e0df-2f7416fe1cb1
- ↑ https://support.microsoft.com/en-us/windows/safely-remove-hardware-in-windows-1ee6677d-4e6c-4359-efca-fd44b9cec369
- ↑ https://support.microsoft.com/en-us/office/save-a-document-b7f55d8c-d714-4892-8fde-853a82419027
- ↑ https://support.microsoft.com/en-us/windows/safely-remove-hardware-in-windows-1ee6677d-4e6c-4359-efca-fd44b9cec369
- ↑ https://support.microsoft.com/en-us/windows/safely-remove-hardware-in-windows-1ee6677d-4e6c-4359-efca-fd44b9cec369
- ↑ https://www.bu.edu/comtech/students/technical-guides/hardware/how-to-format-hard-drives/
About This Article
Article Summary
X
1. Plug the drive into a USB port.
2. Open File Explorer.
3. Select the file and press Ctrl + C
.
4. Double-click your flash drive.
5. Click a blank space on the drive.
6. Press Ctrl + V
.
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,726,537 times.
Reader Success Stories
- "This article saved me from having to go to my grandsons yet again for help to do what for them is "easy peasy." It is so easy to follow that I know that someone has taken a great deal of time to get it just right, and I thank that person or persons for their thoughtfulness. " ..." more
Advertisement