Scoring is the iconic crisscross pattern that allows the glaze to penetrate a cooked ham to season it throughout. This technique exposes a juicy layer of fat, and increases the surface area, which helps the seasoning soak through the rind. You'll need a sharp, clean chef's knife and a sturdy surface to cut the ham. [1] X Research source
Steps
-
Prepare to score. First, place the raw ham on a cutting board. Make sure that it sits squarely and securely on the board, so that it won't rock around while you cut. Find a sharp, clean chef's knife.
-
Slice the ham. Use your knife to make shallow, diagonal cuts across the ham. Each score should be about 1/3" deep. The scores should extend all the way from top to bottom on each side of the ham. Leave about one inch between cuts.
- You may score the ham while it is raw, right before you cook, or you may score it at the end of the baking time – just before you add the glaze. [2] X Research source There is no definitive right or wrong way to do this.
Advertisement -
Complete the diamond score. Now, score the ham in the opposite direction. Make cuts of the same depth and spacing, but perpendicular to the original set of scores. Slice a latticework of diamonds along the surface of the ham. [3] X Research source
- Make sure to use a very sharp and clean knife for this.
-
Dress with cloves. It is common to poke small cloves into the ham for added flavor and aesthetic. Put one clove in the center of each latticework diamond. It is usually easiest to insert the cloves where the scores intersect. [4] X Research source
-
Prepare a ham glaze . For a simple glaze recipe, heat 1/4 cup dark corn syrup, 2/3 cup butter, and 2 cups of honey in the top half of a double boiler. [5] X Research source Keep the glaze warm while the ham is baking.
-
Brush the glaze onto the ham at intervals while baking. Bake the ham at 325°F for one hour and 25 minutes. Every 10-15 minutes, remove the ham from the oven and brush the glaze liberally over the surface. Then, in the last five minutes of baking, turn on the broiler to caramelize the glaze. [6] X Research source
- Wait for the ham to reach an internal temperature of 160° F before you add the glaze. Make sure that it is cooked fully through. [7] X Research source
- Alternately, wait to add the glaze until the last 20-30 minutes of cooking. Then, bake at a steady temperature until the glaze begins to caramelize and turn brown. [8] X Research source
- Be generous with the glaze. Make sure that the sauce spills into all of the scored grooves so that the interior fat of the ham absorbs the flavor.
-
Let cool before serving. Remove the ham from the oven and let it sit at room temperature for several minutes. Serve the scored, glazed ham by slicing along the scores.
Community Q&A
-
QuestionHow long should I cook a 12 lb ham?Community AnswerPut the ham, flat-side down, on a rack in a roasting pan. Pour 1/4 inch water into the bottom of the pan. Transfer the pan to the oven and roast until a thermometer inserted into the thickest part of the ham registers 130 F, about 2 hours, 30 minutes (about 15 minutes per pound).
-
QuestionShould I cover it?Community AnswerYou can if you want to, but not if you want it to brown nicely.
Tips
- For decoration and for extra taste, put a clove in each of the diamonds that you created by scoring the ham.Thanks
Things You Need
- Sharp knife
- Large cutting board
Expert Interview
Thanks for reading our article! If you'd like to learn more about cooking, check out our in-depth interview with Ollie George Cigliano .
References
- ↑ http://www.bhg.com/recipes/how-to/handling-meat/scoring-a-ham/
- ↑ http://www.recipetips.com/kitchen-tips/t--743/ham-preparation-guide.asp#glaze
- ↑ https://www.foodnetwork.com/cooking-channel
- ↑ http://allrecipes.com/recipe/14745/honey-glazed-ham/
- ↑ http://allrecipes.com/recipe/14745/honey-glazed-ham/
- ↑ http://www.recipetips.com/kitchen-tips/t--743/ham-preparation-guide.asp#glaze
- ↑ http://www.recipetips.com/kitchen-tips/t--755/glazing-ham.asp
- ↑ http://www.recipetips.com/kitchen-tips/t--743/ham-preparation-guide.asp#glaze
About This Article
To score a ham, place the raw meat on a cutting board and use your knife to make shallow, diagonal cuts across the ham. Each cut should be ⅓ inch deep and 1 inch apart and extend from the top to the bottom on each side. To finish scoring the ham, cut perpendicular to the original set of scores, making the cuts the same depth and spacing. To learn how to glaze the ham, keep reading!