How to Seam Together Granite Countertops

PDF download Download Article
PDF download Download Article

If you're installing granite countertops as part of your kitchen remodel, there's a good chance you'll need 2 or more pieces of granite due to size and transportation limitations. Since granite countertops are expensive, you want to take care when joining seams in order to make them as unnoticeable as possible. Finding the right color epoxy and mixing it well are just as important as a smooth final seam. If you work carefully, you can seam granite in a way that is durable and nearly unnoticeable.

Things You Should Know

  • Dry-fit the granite countertops to ensure they’re level and align with one another before you begin.
  • Then, apply 2 to 3 thread turnbuckles to the backs of the countertops with suction cups.
  • Mix together the epoxy and apply it to the seam, tightening the turnbuckles and allowing the granite to dry for at least 15 minutes.
Part 1
Part 1 of 4:

Inspecting and Masking the Cut Edges

PDF download Download Article
  1. Unlike man-made countertop materials, the colors and patterns of 2 pieces of granite will never match perfectly at a seam. If you’re cutting the granite slabs yourself, or—more likely—picking out slabs from a supplier, take the time to identify pieces that match up as closely as possible in terms of coloring and veining. This will make the seam much less noticeable to the eye. [1]
    • Professional granite suppliers are usually experts at picking out pieces of granite that will create inconspicuous seams--they can often visualize the best cuts from a granite slab with just their eyes, and perhaps with the help of imaging software. Find a supplier you trust and rely on their expertise.
  2. Before you even think about adhering the pieces together, dry-fit them in place. If the seams don’t line up properly or are rough, remedy the problem. Don’t seam your granite until you’re happy with the edges and fit. [2]
    • Smooth, straight, and properly aligned granite edges are the result of careful measuring and cutting with the proper saw, blade, and skill. Most DIYers don’t have the tools or the skills needed to cut granite properly, so it’s essential that you work with a high-quality supplier.
    • Uneven or rough edges can be remedied, but once again it’s best to rely on your supplier to make these adjustments.
    Advertisement
  3. Grab a soft, clean, lint-free cloth and dampen it lightly with water. You don’t need any special cleaners here—just plain, clean water. Wipe the edges that will be joined, along with the surrounding tops and bottoms of the granite pieces. Let them air dry before proceeding. [3]
    • The goal here is simply to remove any dirt or dust before adding the epoxy.
  4. Run the strips of tape along the top faces of the granite pieces, on the 2 sides that will be joined. This simple effort will make cleanup much easier down the line. [4]
    • Some epoxies claim that they don’t stick to polished granite, meaning you shouldn’t need tape. However, even in this case, it never hurts to go with the tape when you seam granite.
    5. Advertisement
Part 2
Part 2 of 4:

Aligning the Seam and Adding Clamps

PDF download Download Article
  1. Place the 2 edges that you’re going to seam together in close proximity—roughly 1–2 in (2.5–5.1 cm) apart. This will give you enough space to apply the 2-part epoxy to the edges, but also make it easier to squeeze the pieces together quickly. [5]
    • This also gives you the opportunity to take one more look at how well the 2 pieces match up.
  2. Buy a kit with rubber suction cups and metal turnbuckles (which look like very long bolts) that are intended for clamping countertop seams. For each pair of suction cups, thread a turnbuckle through the openings in the top by turning it clockwise. You want the suction cups to be spaced about 4–6 in (10–15 cm) apart on the turnbuckle so you’ll have room to work between and beneath them.
    • 2 pairs of suction cups and 2 turnbuckles should be sufficient for most countertop seams, but you can use 3 or more for longer seams.
    • You can also buy or rent a tool known as a “seam puller” or “seam setter” that uses vacuum pumps to pull and hold the granite pieces together. If you choose one of these, follow the instructions for proper use. [6]
  3. Think of it as placing 2 or 3 “bridges” over the seam, with each turnbuckle serving as the bridge span and the suction cups as the bridge piers. Try to space the suction cups an equal distance from the seam—roughly 2–3 in (5.1–7.6 cm) each. [7]
    • Make sure the suction cups stick well to the granite. Try moistening the underside of each cup with a damp fingertip if needed.
    • After you apply the 2-part epoxy to the seam, you’ll tighten the turnbuckles to pull the pieces of granite tightly together.
    4. Advertisement
Part 3
Part 3 of 4:

Mixing and Applying the Epoxy

PDF download Download Article
  1. Scoop or squeeze out a golf ball sized glob of a clear epoxy resin (intended for stone applications) onto a scrap of cardboard. Follow up with a smaller glob of your chosen tint color and place it near the epoxy resin glob. Scrape small amounts of the tint over to the epoxy resin with a putty knife and stir them together completely until you get the color shade you’re seeking. [8]
    • You can also mix up several test batches of tinted epoxy before deciding on a mixture. Blend together lighter and darker shades of a single tint color, or blend multiple tint colors. Let the tinted epoxy dry for 15-20 minutes, then determine the best match.
  2. Follow the package instructions for your 2-part stone epoxy to determine the proper ratio of hardener to resin. Don’t mix the hardener into the resin until you are ready to adhere the granite pieces together. [9]
    • Stir the hardener into the resin thoroughly with a small putty knife.
    • 2-part epoxies don’t become adhesives until they are mixed, but they harden quickly after being mixed. You’ll have 10 minutes or fewer to work with the mixed epoxy before it hardens.
  3. The mixed epoxy will have a similar consistency to peanut butter, and you can similarly spread it onto the 2 facing edges of the granite pieces. Use a small putty knife and spread even layers of epoxy over the entirety of both facing edges. [10]
    • Apply a thick enough layer of epoxy so that there are no gaps along the facing edges. However, you don’t need to plop on huge globs of epoxy—the excess will just get squeezed out when the pieces are pulled together anyway.
    4. Advertisement
Part 4
Part 4 of 4:

Clamping and Cleaning the Seam

PDF download Download Article
  1. Hand-tighten the turnbuckles by rotating the ends clockwise. Don’t over-tighten them—by using a wrench, for instance—or you’ll pull the suction cups off the granite. Tightening the turnbuckles will bring the suction cups together, which in turn will pull the 2 pieces of granite together.
    • If you’re using a “seam puller” or “seam setter,” follow the product instructions for use.
    • Once the 2 pieces of granite are drawn together, make sure they are even and level with each other. If necessary, you can use your hand or a soft rubber mallet to make minor adjustments. [11]
  2. Glide the blade or knife over the 2 strips of tape and the closed seam between them. This will remove the epoxy that was squeezed out of the seam. [12]
    • You don’t have to remove every bit of excess epoxy right now, but it’s easier to remove most of the excess now, before it dries.
  3. Most epoxies set in 15-20 minutes, but follow the recommendations on the package. After this time has elapsed, you can peel up the suction cups and pull off the tape. [13]
    • Some epoxies may take longer to dry in humid conditions, so consider extending the drying time on a hot and sticky day.
  4. After you’ve peeled off the tape, glide a clean, sharp razor over the seam to scrape away any remaining epoxy. Work carefully, but don’t worry too much about scraping or damaging the granite—it’s a very hard surface! [14]
    • The sharper the razor blade, the easier it will be to scrape off the dried epoxy. So don’t try to reuse a dulled blade for this job.
  5. Wipe down and polish the countertop to finish the job. Once you’ve given the granite seam a close shave with the razor, it’s time for the final cleanup. Moisten a clean cloth with acetone and wipe it over the seam to remove any last remnants of dried epoxy. [15]
    • After the acetone evaporates, you can spray on a granite polish, then buff it according to the product instructions.
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Where do I purchase Insta-Bond?
    Community Answer
    Hardware stores always have a large selection. Some automotive and big-box stores carry it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • You can also try using clear, one-part adhesives (e.g., Insta-Bond) to glue together granite pieces, but most pros rely on tinted, 2-part epoxies to get better-looking and more durable seams. [16]
        Thanks
        Helpful 0 Not Helpful 0
      • Practice your seaming technique on scrap stone, if at all possible. Like anything else, creating great seams takes practice, and you don’t want to see your practice mistakes on your counter.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • masking tape
      • suction cups with turnbuckles
      • 2-part epoxy with selected tinting
      • small putty knife
      • sharp razor blade
      • acetone
      • clean cloth

      You Might Also Like

      How to
      Seal Granite Countertops
      How to
      Polish Granite Countertops by Hand
      How to
      Hang Something on Brick
      How to
      Nail Into Brick
      How to
      Build a Chimney
      How to
      Build a Brick Wall
      How to
      Hang on Stucco Without Drilling
      How To Sculpt Stone Like an Artist
      How to
      Stucco a House
      How to
      Drill Into Brick: Preparation, Tools, and Best Methods
      How to
      Make a Brick Kiln
      Guide to Building a Brick Column: Footing, Courses, & Capstone
      An Expert-Approved Guide to Cutting Brick like a Pro
      How to
      Clean Soot from Brick
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about construction and home renovation, check out our in-depth interview with Andrew Peters .

      References

      1. ↑ https://www.stoneworld.com/articles/85422-in-pursuit-of-the-invisible-seam
      2. ↑ https://www.stoneworld.com/articles/85422-in-pursuit-of-the-invisible-seam
      3. ↑ https://www.todayshomeowner.com/video/how-to-join-seams-in-granite-countertops/
      4. ↑ https://youtu.be/A2ukEQYwVxM?t=50s
      5. ↑ https://www.stoneworld.com/articles/85422-in-pursuit-of-the-invisible-seam
      6. ↑ https://www.todayshomeowner.com/video/how-to-join-seams-in-granite-countertops/
      7. ↑ https://www.todayshomeowner.com/video/how-to-join-seams-in-granite-countertops/
      8. ↑ https://youtu.be/A2ukEQYwVxM?t=50s
      9. ↑ https://youtu.be/A2ukEQYwVxM?t=1m20s
      1. ↑ https://youtu.be/A2ukEQYwVxM?t=1m20s
      2. ↑ https://www.todayshomeowner.com/video/how-to-join-seams-in-granite-countertops/
      3. ↑ https://www.todayshomeowner.com/video/how-to-join-seams-in-granite-countertops/
      4. ↑ https://youtu.be/A2ukEQYwVxM?t=1m50s
      5. ↑ https://youtu.be/A2ukEQYwVxM?t=1m50s
      6. ↑ https://youtu.be/A2ukEQYwVxM?t=1m50s
      7. ↑ https://www.youtube.com/watch?time_continue=3&v=Z_mXLTVMx2k

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 188,768 times.

      Reader Success Stories

      • Gilly Bassett

        Feb 13, 2020

        "I wish to make a hearth for a wood-burning heater to be mounted on. Being a handy sort of girl, I now know how to ..." more
      Share your story

      Did this article help you?

      Advertisement