How to Prefectly Sear Steaks on the Grill

PDF download Download Article
Learn the right temperatures and timing for a dlectable sear
PDF download Download Article

Searing a steak over high heat on the grill caramelizes the sugars and proteins on the outside of the meat, creating a crispy and flavorful crust. You can use a sear burner if your gas grill has one. If not, you can also sear steaks on a charcoal grill by moving the grates close to the coals. We'll show you how to prep the steak and sear it both ways, for the perfect brown every time.

Quick Guide to Steak Searing

Wait for your steaks to come to room temperature while your grill heats to 400 °F (204 °C). Then grill the steak on each side for 60-90 seconds, until both sides are evenly browned.

Section 1 of 3:

Preparing the Steaks

PDF download Download Article
  1. Keep them covered or inside their packaging until you are ready to cook them. When the steak is at room temperature, it can quickly get to high-heat on the grill. Leave it cold and the centers will take too long to cook.
  2. This will help you to create a crisper crust on the outside of your steak. Think of the salt as a light snow on a dark road -- you can still see the steak, but there is a light dusting on the entire piece of meat.
    • Use the biggest grains of salt you can, such as course or kosher salt. Bigger grains dissolve slower, leading to a better crust on your steak. [1]
    Advertisement
  3. Depending on your grill, you can get very different flavors from your steak:
    • Propane (Sear Burner): Gas grills don't give much flavor to the meat, but they are easy to adjust and toy with to get the perfect heat. They also get hot much, much faster than other grills.
    • Charcoal: The classic choice, charcoal briquettes light up and get hot faster than woodchips. They give the classic rich, smoky flavor to the steaks.
    • Wood-fire: Hickory or oak chips often give the best flavor to the meat. The trade-off? They are harder to light and keep ablaze. You can also use a mixture of charcoal and wood instead of just wood-chips.
    4. Advertisement
Section 2 of 3:

Searing Steaks on the Grill

PDF download Download Article
  1. Placing the grate 2 to 3 inches above the coals will create high direct heat for searing your steaks. Make sure one section of the grate has no coals under it; that safe zone will stay cooler for cooking the interior of your steak.
  2. Position the grate so that it is 2 to 3 inches above the coals. Leave a safe zone with no coals for cooking the interior of the meat.
  3. Aim to get the inside of the grill to 400°F if you have a grill thermometer. The thinner your steaks are, the hotter you want the grill. This is because you don't want to cook the inside of the steak before the outside is a nice, crispy brown:
    • 1/2 inch thick: 425-450°F. You shouldn't be able to hold your hand over the grill for more than 3 seconds.
    • 3/4-1 inch thick: 360-400°F You shouldn't be able to hold your hand over the grill for more than 4-5 seconds.
    • 1-1 1/2 inch thick: 325-360°F You shouldn't be able to hold your hand over the grill for more than 5-6 seconds. [2]
  4. Then, light the coals directly or light them using a charcoal starter. Allow the temperature to reach 500 degrees Fahrenheit (260 C) before placing the steaks on the grill.
  5. The number of steaks that you can sear at one time will depend on both the size of your grill and the size of your steaks. Make sure that you leave at least a 2” (5 centimeter) clearance around the meat for even cooking.
  6. Cook the second side for 1-1/2 minutes. You should have a crispy brown crust on both sides of the meat. [3]
  7. You can use your fingers to press on the steak and check it's doneness:
  8. You can use the fleshy part of your hand underneath the thumb to test out your steaks. To do so, simply press one finger into the center of the steak, then compare it against the following benchmarks.
    • Raw: Touch the fleshy part of your palm right underneath the thumb. It should have a lot of give.
    • Well done: Using the same hand, touch your thumb and pinky together. For comparison, touch the fleshy part under your thumb with the opposite hand, holding your thumb and pinky together. It will be firm.
    • Medium: Touch your thumb and ring finger, then check underneath your thumb. It will be a little less firm than the well-done version.
    • Medium Rare: Touch the thumb and middle together, then check your palm.
    • Rare: Touch the thumb and pointer fingers, then check your palm. [4]
  9. If you cut into a hot steak right as it comes off the grill it will lose delicious juices. Resist the urge and place a piece of aluminum foil over the meat for 5 minutes or so, then dig in and enjoy. [5]
    11. Advertisement
Section 3 of 3:

Searing Steaks Using a Sear Burner

PDF download Download Article
  1. A sear burner is a separate section of a gas grill that has an infrared plate to create extremely high temperatures. Sear your steaks on this burner and then move them to a cooler section of the grill to cook them through. You do not need to close the lid while the steaks are searing.
  2. Preheat another burner on your gas grill at a medium setting. Coat the burners with nonstick cooking spray.
  3. The quantity will depend on the size of your steaks and the size of your burner. Make sure that you have at least 2” (5 centimeters) of space between the pieces of meat so that they can cook evenly.
  4. Flip the steaks over using a pair of tongs and sear them for an additional 1-1/2 minutes on the other side. Make sure to sear the fatty edges and the bones. Each side of the steaks should have a crisp, caramelized crust that is brown without being burnt. [6]
  5. Use a meat thermometer to ensure that your steaks are cooked to the right temperature depending on your preference for doneness.
  6. You can use your own hand to check how done your steaks are, making sure you get it off perfectly each and every time. Simply press one finger into the steak and compare the feeling to various parts of your hand. This method is useful if you don't have a meat thermometer or don't want to pierce the meat in the process, causing it to lose juices and flavor. To check doneness with your hand:
    • Raw: Touch the fleshy part of your palm right underneath the thumb. It should have a lot of give.
    • Well done: Touch your thumb and pinky together on the same hand. Then touch the fleshy part under your thumb with the opposite hand. It will be firm.
    • Medium: Touch your thumb and ring finger together, then check the palm. It will be a little less firm.
    • Medium Rare: Touch the thumb and middle fingers, then check the palm.
    • Rare: Touch the thumb and pointer, then check the palm. [7]
  7. Standing the meat refers to letting it sit, uncut, for 5-6 minutes. This allows the meat to reabsorb the juices and fats that liquefied in the high heat, and will lead to a juicier, better tasting steak every time. [8]
    8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What temperature should a steak be for medium rare?
    Short Cake
    Community Answer
    130-135 F is the temperature range for medium rare at which steaks are at their most tender, juicy, and flavorful.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • After searing your steak, cook it to an internal temperature of 120 degrees Fahrenheit (50 C) for rare, 125 degrees Fahrenheit (52 C) for medium rare or 130 degrees Fahrenheit (55 C) for medium. The internal temperature will rise another 5 degrees or so after you remove the steak from the grill.
        Thanks
        Helpful 43 Not Helpful 22
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Beef is safest to eat when its internal temperature is at least 135 degrees Fahrenheit (57 C).
        Thanks
        Helpful 9 Not Helpful 4
      Advertisement

      Things You'll Need

      • Grill
      • Olive oil
      • Kosher salt
      • Pepper
      • Tongs
      • Cast-iron skillet (optional)
      • Charcoal
      • Nonstick cooking spray
      • Meat thermometer

      You Might Also Like

      How to
      Pan-Fry the Perfect Steak on the Stovetop
      How to
      Cook Top Sirloin Steak
      How to
      Measure a Tablespoon with and without Measuring Spoons
      How to
      Safely Boil Water in the Microwave
      How to
      Make Perfect Hard-Boiled Eggs Every Time
      How to
      Blanch Green Beans
      How to
      Parboil Potatoes Perfectly Every Time
      How to
      Season a Stainless Steel Pan with Oil
      How to
      Boil Water (& How Long It Takes)
      The Quickest Way to Make a Reduction for Any Recipe
      How to
      Make Olive Oil
      How to
      Defrost Dough
      How to
      Poach an Egg Using a Microwave
      How to
      Make Diffuser Oil
      Advertisement

      References

      1. ↑ http://www.seriouseats.com/2015/05/food-lab-how-to-grill-steak-cuts-of-steak-marbling-salting-charcoal-technique-resting-tips.html
      2. ↑ https://www.heb.com/recipe/recipe-article/grill-times-temperatures-for-steak/1392677044707
      3. ↑ https://www.heb.com/recipe/recipe-article/grill-times-temperatures-for-steak/1392677044707
      4. ↑ http://www.simplyrecipes.com/recipes/the_finger_test_to_check_the_doneness_of_meat/
      5. ↑ http://www.seriouseats.com/2009/12/how-to-have-juicy-meats-steaks-the-food-lab-the-importance-of-resting-grilling.html
      6. ↑ https://www.heb.com/recipe/recipe-article/grill-times-temperatures-for-steak/1392677044707
      7. ↑ http://www.simplyrecipes.com/recipes/the_finger_test_to_check_the_doneness_of_meat/
      8. ↑ http://www.seriouseats.com/2009/12/how-to-have-juicy-meats-steaks-the-food-lab-the-importance-of-resting-grilling.html
      9. https://amazingribs.com/more-technique-and-science/grill-and-smoker-setup-and-firing/best-setups-for-gas-grills/
      1. http://www.grillingcompanion.com/pan-seared-steak/
      2. http://www.grillingcompanion.com/searing-steak/

      About This Article

      Article Summary X

      To sear steaks on the grill, let the steaks come to room temperature and season both sides liberally with salt and pepper. Next, place the grill grate 2-3 inches above the charcoals and coat the grate with nonstick cooking spray. Then, light the coals and let the temperature reach 500 degrees Fahrenheit. Finally, place the steaks on the grill rack and sear the first side for 1 1/2 minutes, flip them, and sear the other side for 1 1/2 minutes until they develop a crispy brown crust. For tips on finishing the steaks on the cool side of the grill, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 248,215 times.

      Reader Success Stories

      • D. Bigler

        Jun 26, 2016

        "We bought a Sears gas grill with a sear burner, but the instruction booklet gave no instructions on how to use it. ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement