PDF download Download Article PDF download Download Article

If you're a fan of non-stick cookware, you may have just bought or are thinking about buying a Red Copper Pan. These pans are especially popular for their impressive ability to keep food from sticking during cooking. However, before you use your new pan, you’ll need to season it in order to make it as non-stick as possible. To do this, apply a thin layer of oil to the pan and then heat it so that any small pores on the surface of the pan are filled in.

Method 1
Method 1 of 2:

Seasoning Your Pan on the Stove

PDF download Download Article
  1. Be very gentle when cleaning your pan if it’s brand new; harshly scrubbing it could cause tiny abrasions in the surface. Instead, use a soft cloth to softly lather the soap into the pan. Rinse the pan to get all the soap off of it before proceeding.
    • It’s very important to clean newly bought pans to make sure they don’t have any harmful chemicals or substances on them.
  2. Use your fingers or a paper towel to spread the oil over the entire inner surface of the pan. Go with vegetable oil if you have it, or opt for an oil with a high smoking point. Using an oil that heats too quickly can lead you to inadvertently burn your pan.
    • Examples of oils with high smoking points include peanut oil, grapeseed oil, and canola oil. Olive oil heats up relatively quickly, so refrain from using it to season your pan.
    Advertisement
  3. You don’t have to wait for the burner to heat to a certain temperature; simply put the pan on it as soon as you turn on the heat. Medium heat is the middle heat setting on a stovetop dial. [1]
    • For example, if the dial on your stove goes from 1 to 10, then you’d have to turn the dial to 5 to set it to medium heat.
  4. It shouldn’t take more than 3-5 minutes for the oil in your pan to start smoking. Be sure to use oven mitts or heat-proof gloves when handling the pan to avoid getting burned. [2]
    • If any puddles of oil begin to appear on your pan during the heating process, gently turn the pan in order to break them up.
    • Don’t forget to turn off the burner once you’ve removed the pan.
  5. It’s very important to let the vegetable oil thoroughly dry so that all the tiny pores on the surface of the pan become filled in. This process should take about 15 minutes. [3]
    • Leave the pan to cool at room temperature. Don’t put in the refrigerator, as this may warp the ceramic.
  6. Most of the oil will have dried after 15 minutes, but the rest of it will need to be gently removed once the pan is cool. After this is done, the pan is ready to use!
  7. Advertisement
Method 2
Method 2 of 2:

Using the Oven to Heat Your Pan

PDF download Download Article
  1. It should take 10-15 minutes for your oven to preheat. Do not put your pan in the oven before it’s preheated all the way.
  2. Lather the soap into the pan with a soft cloth without scrubbing too harshly. Be especially gentle if the pan is brand new, since you may inadvertently cause tiny abrasions in the surface. Once you’ve cleaned the whole surface, make sure to rinse all the soap off of the pan.
    • Cleaning the pan will also ensure you remove any harmful chemicals or substances that may be on it if it’s brand new.
  3. Use vegetable oil or another oil with a high smoking point to oil the pan. Spread the oil around with your fingers or a paper towel, making sure to spread it over the pan’s entire inner surface.
    • Examples of oils with high smoking points include peanut oil, grapeseed oil, and canola oil.
    • Avoid using an oil that heats too quickly, such as olive oil, since this may accidentally burn the pan instead of seasoning it.
  4. Place it on the middle rack of the oven for the best results. If you see smoke coming off the pan before 20 minutes have passed, go ahead and remove the pan.
    • Note that you may not see smoke come off of the pan using this method, even though the pan is still being adequately seasoned.
    • Use oven mitts when putting the pan in the oven to avoid getting burned.
  5. During this time, the oil you put on the pan will dry and fill in the tiny pores on the pan’s surface. This process should take about 15 minutes. [4]
    • Be sure to use oven mitts to remove the pan so that you don’t get burned.
    • Don’t put the pan in the refrigerator to cool it, since this may cause the ceramic to warp. Instead, leave the pan out at room temperature.
  6. You’ll need to remove any oil that hasn’t dried on the pan after 15 minutes before you can cook with it. Then, it’s ready to be used!
  7. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Season your pan at least once a year to maintain its full effectiveness. However, for the best results, aim to season it every 3 months.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Oven mitts
      • Oil
      • A soft cloth
      • Paper towels

      About This Article

      Thanks to all authors for creating a page that has been read 80,531 times.

      Reader Success Stories

      • Mickey Gennuso

        Mar 7, 2019

        "Thanks for nice, easy, specific steps for what's been a disaster to deal with for several months. The ..." more
      Share your story

      Did this article help you?

      Advertisement