How to Set Up Guitar Pedals

PDF download Download Article
PDF download Download Article

Guitar pedals, sometimes called effects pedals, provide an easy and effective way to modulate your electric guitar's tone. The order of your pedals well ensure the best tone, but what tone that is depends on your personal preference. While there are basic guidelines, there's really no right or wrong way to order your pedals. To set up guitar pedals, learn the basic guidelines and experiment to find the arrangement that best creates the style and tone you want in your music. [1]

Method 1
Method 1 of 3:

Ordering a Signal Chain

PDF download Download Article
  1. While there are some standard configurations for guitar pedals, the order of your pedals depends on the tone you want to achieve. This will differ depending on the style of music you play.
    • Make sure you're preserving the functionality of the pedal. Keep in mind that switching the order can have a drastic effect on the tone produced. You may want to experiment with some pedals in different positions until you find the sound you want.
    • There is one golden rule: drives and gain-driven pedals go first in the chain, then come the filters which are followed with modulation, leaving the time-based effects for last. [2]
    • Once you've chosen your order, number your pedals so you can easily reproduce the same order and don't have to memorize it.
  2. When choosing the cables that connect your pedals, be willing to invest in quality. The better the cable, the better the tone from your guitar. [3]
    • Your patch cables should be as short as possible. Longer cables will cause the signal to degrade and your tone will suffer.
    Advertisement
  3. If you use a chromatic tuner pedal, plug your guitar directly into the tuner. You want the pedal to tune your guitar's clean, unmodulated signal rather than the heavily distorted sound produced by first running the signal through other effects pedals.
  4. Filter pedals, such as auto-wahs, envelope filters, and wah-wahs, typically work best when they follow your tuner pedal. If you don't use a tuner pedal, filter pedals should be first in your setup.
    • Any filter should modulate a clean signal. Placing them after other effects pedals limits their ability to function properly.
    • This also may be a good position for phaser pedals, depending on the type of tone you want to achieve.
  5. Compressor pedals "level out" your guitar's volume, boosting the volume of quieter tones.You'll get lots of noisy, unwanted sound if you put the compressor pedal later on in the chain when the guitar's tone has already been heavily modified.
    • Depending on the type of music you're playing, you may actually want your compressor pedal at the end of your chain. For example, if you're playing country music, a compressor pedal at the end of the chain squashes everything, regardless of the effects you're using. With rock music, on the other hand, it typically works better right after the filter pedals.
  6. Overdrive and distortion pedals are some of the most popular types of effects pedals, particularly in rock music. Placing these pedals before filter and compressor pedals can produce an unpleasant tone.
    • Overdrive and distortion pedals generate and amplify the overtones of each note you play. For this reason, you don't want amplified overtones fed into filter or compressor pedals.
  7. In most cases, a pitch-shifting pedal functions best when it's being fed a compressed signal. You generally want to place it after compression or equalizer pedals, unless you've positioned your compressor pedal at the end of your chain.
  8. If you're using any modulation pedals such as chorus, flanger, tremolo, or phaser pedals, you generally want to place them later in your signal chain so they have a richer sound.
    • If you have multiple modulation-style pedals, you may want to experiment with their order until you find the best arrangement that will give your guitar the tone you want.
  9. Whether you put the volume pedal earlier or later in the signal chain affects what part of your guitar's sound the pedal adjusts, and gives this pedal a different functionality. [4]
    • Near the beginning of your signal chain, closest to your guitar, the volume pedal will adjust the volume of your unmodulated signal going into other effects pedals. It can be helpful to clean up your sound if you use overdrive a lot.
    • Placing your volume pedal towards the end of your signal chain adjusts the volume of the finished signal.
  10. When ordering time-based pedals such as delay pedals, think of how the sound you're creating actually occurs in physical space. Since delay or echo is the last thing heard, it makes sense to place these types of pedals at the end of the signal chain. [5]
    • Keep in mind that placing a delay pedal before a volume pedal can make it more difficult to control the volume of each successive delay or echo effect.
    11. Advertisement
Method 2
Method 2 of 3:

Using an Effects Loop

PDF download Download Article
  1. Not all amps have an effects loop, but if yours does, you can experiment with placing some of your effects inside your amp's effects loop to give your guitar a richer, more nuanced tone. [6]
    • The effects loop is before the power amp section but after the preamp of your amplifier. You'll see "Effects Send" and "Effects Return" jacks. On some amps these may also be labeled "Preamp Out" and "Power Amp In."
  2. Most guitarists who use the effects loop to set up their guitar pedals put the time-based effects in the loop to avoid the washed out sound that can be produced if these effects are fed into the overdrive and distortion of the amp. [7]
    • This set-up can give you a clearer sound if your amp is generating sound that is overdriven or distorted. The sound from your amplifier's preamp section feeds into these effects.
  3. Placing modulation pedals in the effects loop will give you a different sound than if you run them through your signal chain directly from your guitar. Experiment with these and see if it suits your style. [8]
    • Moving the volume pedal inside the effects loop allows you to control the entire sound coming out of the amplifier.
    4. Advertisement
Method 3
Method 3 of 3:

Using a Pedal Board

PDF download Download Article
  1. Pedal boards can be bought off the shelf or customized to your particular set-up. Whether you choose a small, medium, or large pedal board generally depends on the number of pedals you're using on a regular basis and the size of those pedals.
    • Generally, if you're using five or fewer pedals, you want a small pedal board. For more than ten pedals, on the other hand, you want a large pedal board.
    • Also take into consideration if you plan to add more pedals over time. For example, if you currently use four pedals but plan on adding three more, it's best to go ahead and get a medium-sized pedal board so you'll have room for the others when you get them.
    • If your pedals are oversized, you may want to get a large pedal board even if you're only using four or five pedals. This will prevent overcrowding.
  2. Whether you're buying a pre-built board or building your own, you need to make sure the pedal board will power all your pedals. While most pedals require 9 volts of power, some require more.
    • Be sure to check the power requirements of every pedal in your set-up – don't just assume they're all the same.
    • You also want to check the power requirements of pedals you plan to add later on to ensure the board you buy can handle them.
  3. Your power supply needs to have the correct voltage as well as be able to handle the number of pedals you have or ultimately will have once your set-up is complete.
    • For example, if you have 10 pedals, all of which require 9 volts, you'll need a 9-volt power supply capable of handling 10 or more pedals.
    • If you have one pedal that requires 12 volts, you'll need to look for a power supply that allows you to isolate pedals, because you don't want 12 volts running through the other pedals that require less power.
  4. While you do want to leave a little bit of space between pedals on your pedal board to keep it from looking cluttered, you still want to use extremely short patch cables to preserve the quality of your sound.
    • Choose cables with right-angle plugs rather than straight plugs, and this will cut down on the amount of space the cables take.
    • If you have the tools to do so, you can pretty easily cut your own cables, which can both save you money and ensure that your cables are the exact length you need for your particular set-up.
    • Avoid black cables, as they can get lost on a stage and you may not be able to easily identify the problem if one is unhooked or damaged.
  5. Because you may want to change the order of your pedals to alter your guitar's tone, use a non-permanent means such as Velcro to fix the pedals in place on your pedal board.
    • Particularly if you're working with a large number of pedals, you may want to stagger them so they alternate between the front and rear edges of the pedal board. This will make it easier for you to differentiate between them and hit the pedal you want during a performance.
    • Make sure the pedals you use most often are laid out so they are easiest for you to reach with your foot.
    • Keep in mind that the location of the pedals on the board doesn't necessarily need to follow the signal chain you've created exactly. However, you do want to follow it as closely as possible to reduce the length of the patch cables.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What pedals should every guitarist have?
    Michael Papenburg
    Professional Guitarist
    Michael Papenburg is a Professional Guitarist based in the San Francisco Bay Area with over 35 years of teaching and performing experience. He specializes in rock, alternative, slide guitar, blues, funk, country, and folk. Michael has played with Bay Area local artists including Matadore, The Jerry Hannan Band, Matt Nathanson, Brittany Shane, and Orange. Michael currently plays lead guitar for Petty Theft, a tribute to Tom Petty and the Heartbreakers.
    Michael Papenburg
    Professional Guitarist
    Expert Answer
    A basic setup for your pedals might be: booster overdrive pedals, modulation pedals (chorus, flange, Tremolo), delay pedal, and reverb.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    Where should a noise suppressor be placed?
    Community Answer
    It depends on what purpose the noise suppressor will fulfill. You may need more than one placement depending on your purpose. If you position it behind the tuner, it will remove any unwanted noise from the guitar signal before it gets modified with the pedals (this is the most common placement). Guitarists also use the noise suppressor or noise gate pedals after an overdrive to cut the riff sharply.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 20
  • Question
    Where should a boost pedal go in the chain?
    Community Answer
    After the compressor, but before the gain (distortion) pedals. This will increase volume on clean tones and boost the drive on lead tones.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 23
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Use a Guitar Pedal
      How to
      Fix Guitar Tuning Pegs
      How to
      Adjust the Truss Rod on a Guitar
      How to
      Make Your Fingers Hard for Guitar
      How to
      Adjust the Action on a Guitar
      How to
      Plug a Guitar Into a Laptop
      How to
      Set Up a Guitar
      How to
      Write Guitar Tablature
      The Best Ways to Personalize Your Acoustic or Electric Guitar
      How to
      Fix a Guitar Bridge
      How to
      Put a Guitar Strap on a Classical Guitar
      How to
      Write a Guitar Solo
      How to
      Block a Floyd Rose Tremolo
      How to
      Find an Octave on a Guitar
      Advertisement

      References

      1. ↑ http://www.rolandus.com/blog/2013/03/06/how-to-chain-your-guitar-effects-pedals/
      2. ↑ https://www.awkwardsound.com/how-to-organize-guitar-pedals-on-pedalboard/
      3. ↑ https://www.premierguitar.com/gear/shifting-gear-patch-cable-considerations
      4. ↑ http://www.strymon.net/setting-up-your-effect-signal-chain/
      5. ↑ http://www.rolandus.com/blog/2013/03/06/how-to-chain-your-guitar-effects-pedals/
      6. ↑ http://www.strymon.net/setting-up-your-effect-signal-chain/
      7. ↑ http://www.strymon.net/setting-up-your-effect-signal-chain/
      8. ↑ http://www.strymon.net/setting-up-your-effect-signal-chain/

      About This Article

      Article Summary X

      To set up guitar pedals, use a short patch cable to connect your guitar directly into the tuner pedal if you’re using one. If you’re using filter effects pedals, like auto-wahs and envelope filters, connect them next. Plug in your compressor pedal after the filter pedals, followed by pitch-shifting, overdrive, and distortion pedals. Set up your modulation pedals, like chorus, flanger, tremolo, or phaser pedals, near the end of the chain so they’ll have a richer sound. Keep reading to learn how the position of the volume pedal can affect its functionality!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 357,909 times.

      Reader Success Stories

      • SiCoul

        Feb 1, 2019

        "wikiHow was recommended by a friend after I'd consulted various other (specialist) sites and was still unsure ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement