How to Set a Timex Ironman

The Timex Ironman is a sports watch that allows you to time and track your athletic performance. It has several features that you have to set for accuracy. Set the date and time so all the clock's readings are accurate. Stay on time by setting the watch's alarm features. Finally, use the Chrono setting to measure and track your laps while you run.

Method 1
Method 1 of 3:

Date and Time Selection

PDF download Download Article
  1. This button is located at the top left side of your Timex. Hold the button down for 3-5 seconds to enter the time set menu. After that time, the screen will read “Set” across the top. [1]
    • At any time during this process, pressing “Set/Recall” again closes the time set menu and saves all your changes up until that point. If you’ve made all the changes you wanted to make, then press “Set/Recall” to save them without scrolling through the whole menu.
  2. The Timex allows you to set the time for 2 or 3 different time zones, depending on the model. You’ll automatically be in time zone 1 when you enter the time set menu. If you want to set time zone 2 or 3, press the “+” button to move the time zone forward. Press the “-“ button to move it back. [2]
    • The + button is located on the front of the watch directly below the watch face, and the - button is located on the bottom right side of the watch.
    • On some Timex models, the + button reads “Start/Split” and the – button reads “Stop/Reset.” [3]
    • This feature is useful for checking the time in another part of the world quickly. If you do business or have to make a phone call to different time zones, it’s handy to stay organized.
    Advertisement
  3. The Mode button is in the lower left of the watch. On the digital screen, this area will read “Next.” This button cycles the menu between the hours, minutes, seconds, day, and date, in that order. Press it to make the hours on the watch face flash. Use the + or – buttons to cycle the hours forward or backwards. Then press Mode again to make the minutes flash. Cycle through the minutes with the + or – keys as well, then do the same for the seconds. [4]
    • If you only wanted to set the time and leave the date alone, press Set/Recall after this step to save your progress and close the menu.
  4. After setting the time, press Mode again. The day section above the time will start flashing. Cycle forward with the + button and backwards with the – button. Then press Mode again when you’ve chosen the right day. [5]
  5. When you press Mode after setting the day, the month (in number form) will start flashing. Select the correct month with the + and – buttons. Then press Mode again and select the current date. [6]
  6. Choose if you want the time displayed in 12 or 24-hour mode. When you press Mode after setting the date, the menu changes to 12 or 24-hour time mode. The mode you’re currently in will flash. Use the + button to cycle between both time settings, and press Mode when you pick one. [7]
    • The advantage of 24-hour time is that you don’t have to check if the time is AM or PM. It’s easier to tell what part of the day it is with a quick glance.
  7. This button closes the menu and brings you back to the normal watch display. The changes you made will be saved. [8]
    • If the time or date looks wrong, you may have set them incorrectly. Press Set/Reset again to open the time menu back up and check your settings.
    8. Advertisement
Method 2
Method 2 of 3:

Alarm Setup

PDF download Download Article
  1. Cycle through the options to get to the alarm menu. If your Timex model allows you to set multiple alarms, select ALM1 by pressing Stop/Reset. [9]
    • To set multiple alarms, keep pressing Mode to find ALM2 and ALM3. Select each one with Stop/Reset.
  2. Set/Recall opens the alarm menu. By default, the time will appear and the hours will be flashing. Adjust the hours up and down with the + and – buttons. Press Mode (Next) to make the minutes flash and do the same thing. Press Mode once more to select whether you want the alarm to sound in the AM or PM. [10]
    • If your watch is set to 24-hour time, you don’t have to select AM or PM.
  3. Press Mode after setting the alarm time. The option above the time will begin flashing. This will say “Daily,” “Wkday,” or “Wkends,” depending on where you last had it set. Press Start/Split to cycle through the options and select how often you want the alarm to sound. [11]
    • If you only want the alarm to ring on one day, disable it after it rings.
  4. This programs the alarm into your watch memory. The alarm will sound on the times and days that you set it to. [12]
    • A small clock icon appears on the left of your watch display to let you know that an alarm is active.
  5. Get to the alarm menu by cycling through the Mode button until you reach ALARM. Then press Start/Split to toggle the alarm off. [13]
    • To reactivate the alarm, do the same actions and hit Start/Split to toggle the alarm back on.
    6. Advertisement
Method 3
Method 3 of 3:

Pace and Splits Tracking

PDF download Download Article
  1. Chrono is the mode you use to track your split and lap times. It’s the second option after the main clock. [14]
    • If you scroll too far and miss Chrono mode, keep pressing Mode to cycle through the watch options. The watch modes are Clock, Chrono, Timer, and Alarm. Cycle back to Chrono if you miss it the first time.
  2. You have 2 options for the Chrono setting. One displays the current lap time larger with the overall split time smaller. The other reverses the order, and shows the split time larger. Cycle between them with the Start/Split button. Then press Set/Recall again when you pick a format. [15]
    • If you’re trying to improve your lap time, set the Lap to appear larger. This way, you can see how your laps are measuring up.
    • If you’re just timing your run without tracking laps, then displaying Split larger is more useful.
    • The watch keeps the format that you picked for every time you use the Chrono unless you change it again.
  3. This begins the timer. Start your workout and use the Chrono to check your current time. If you’re only measuring your overall run or exercise time, then just let the timer go. If you want a specific lap or split time, the Chrono can also measure this. [16]
  4. If you’re tracking your lap progress, press the Start/Split button when you complete a lap. The timer display will show your lap time for 10 seconds so you can read it. The timer continues running in the background and switches back after 10 seconds. [17]
    • You can use this feature for any measurement. Whether you’re tracking your time per lap, mile, kilometer, or another distance, the Chrono will measure it when you hit Start/Split.
    • Repeat this for as many laps as you’re running to get the time for each lap.
  5. If you need a break or want to talk to someone, pause the timer by pressing Stop/Reset. Then when you’re ready to start again, press Start/Split to resume the timer where it paused. [18]
    • Be careful not to accidentally hit Stop/Reset again to start the timer. This will erase your current workout and you’ll have to start over.
  6. When you’re done, stop the timer by pressing Stop/Reset and then holding the same button to reset the data. If you want to store and review your workout results, hold Set/Recall to save the data. [19]
  7. This brings you to the workout data menu. All the results you’ve stored are on this menu by date. To review your workouts, use + and – to scroll to the one you want to view. Then press Next (or Mode) to open a specific workout. [20]
    • When on a specific workout, you can view each lap of your run plus the total time.
    • To clear a workout, hold Stop/Reset for 5 seconds. When the watch beeps, the last stored workout is deleted.
    • Continue holding the button to erase all workouts and free up all the watch memory.
    8. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I properly clean a watch?
    Bill Green
    Jewelry & Watch Expert
    Bill Green is an Expert Jeweler and Appraiser. He is also the Founder & Creative Director of Jewelry & Timepiece Mechanix, and the Founder and Designer of Amaroo Handmade Opal Jewelry, based in Haddonfield, New Jersey. With over 40 years of industry knowledge, he and his team are known for restoring everything from new watches to vintage jewels and being one of the few shops that still design and make jewelry and watches. Jewelry & Timepiece Mechanix is part of the American Society of Jewelers and Gemologists and Ethical Metalsmiths. Bill studied at the Miami Jewelry Institute and the Gemological Institute of America as well as apprenticed with many accomplished craftspeople.
    Bill Green
    Jewelry & Watch Expert
    Expert Answer
    To clean your watch, first, acquire a specialized watch polisher available online or at watch shops. Once obtained, apply a small amount of the polisher to the watch surface. Use gentle circular motions to buff the entire watch, focusing on areas with dirt or grime buildup. After polishing, use a clean microfiber towel to buff the watch, removing any remaining polish residue and restoring shine. However, if you're uncertain about the build quality or materials of your watch, it's advisable to seek assistance from a professional watchmaker to prevent damage.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    How do you count laps on a Timex Ironman?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    You can count laps by putting your watch in CHRONO mode. Hit the Mode button until CHRONO appears on the display, then press START/SPLIT to begin CHRONO. Hit START/SPLIT again to create a split between laps. STOP/RESET will stop Chrono mode, and SET will store your workout. Your watch can count up to 99 laps and will store 50.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 3
  • Question
    How do I set the day on my Timex watch?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Go into TIME mode and press and hold SET. Hit NEXT to cycle through the different elements of the TIME mode until you get to the day of the week or month, then use the +/- buttons to go up or down to the correct day. Press DONE when you’re finished.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 0
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Size & Shorten a Metal Watch Band at Home
      How to
      Adjust a Watch Band
      3 Easy Ways to Open the Back of a Watch With Household Items
      How to
      Set the Time and Date on a Digital Watch
      How to
      Set the Time & Date on Your Armitron Watch
      How to
      Fix a Fast-Draining Apple Watch Battery: 14 Ways
      How to
      Set the Time on a Baby G Watch
      How to
      Change a Watch Battery
      How to
      Tell if a Rolex is Real or Fake: 11 Signs of Authenticity
      How to
      Remove Scratches from Watch Glass
      How to
      Wear a Watch
      How to
      Measure Wrist Size
      How to
      Find Bulova Model Number
      How to
      Wind an Automatic Watch
      Advertisement

      References

      1. ↑ http://assets.timex.com/user_guides/W254_M511/W254_M511_NA_EN.pdf
      2. ↑ http://assets.timex.com/manual/W-191.pdf
      3. ↑ https://youtu.be/mozIqaItjtM?t=20
      4. ↑ https://youtu.be/mozIqaItjtM?t=28
      5. ↑ http://assets.timex.com/manual/W-191.pdf
      6. ↑ http://assets.timex.com/manual/W-191.pdf
      7. ↑ https://youtu.be/mozIqaItjtM?t=38
      8. ↑ http://assets.timex.com/user_guides/W254_M511/W254_M511_NA_EN.pdf
      9. ↑ http://assets.timex.com/manual/W-191.pdf
      1. ↑ http://assets.timex.com/manual/W-191.pdf
      2. ↑ https://youtu.be/vmUOgw5KUIU?t=505
      3. ↑ https://youtu.be/vmUOgw5KUIU?t=521
      4. ↑ http://assets.timex.com/manual/W-191.pdf
      5. ↑ http://assets.timex.com/manual/W-191.pdf
      6. ↑ https://youtu.be/vmUOgw5KUIU?t=218
      7. ↑ http://assets.timex.com/manual/W-191.pdf
      8. ↑ https://youtu.be/vmUOgw5KUIU?t=253
      9. ↑ https://youtu.be/vmUOgw5KUIU?t=279
      10. ↑ http://assets.timex.com/manual/W-191.pdf
      11. ↑ http://assets.timex.com/manual/W-191.pdf

      About This Article

      Article Summary X

      To set your Timex Ironman, you’ll first need to select the correct date and time. Push down on the “Set/recall” button until the Set menu appears. Then, use the plus, minus, and “Mode” buttons to select the correct date and time. When you’re done, press the “Set/recall” button to save your changes. Once you’ve set the time, you can also set alarms. Just press the “Mode” button until the alarm menu appears on the display. Select it by pressing the “Set/recall” button, then select the time for your alarm using the plus and minus buttons. After you set the alarm, you can also choose how often it should ring, such as daily, on week days, or at weekends. For tips on how to measure your running times with your Timex Ironman, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 269,525 times.

      Reader Success Stories

      • Anonymous

        Nov 3, 2017

        "This was great! I was having a hard time figuring out how to set my watch to the correct time and date before this, ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement