Download Article
Download Article
Configuring networks such as a Digital Subscriber Line (DSL) or Asynchronous Digital Subscriber Line (ADSL) primarily used for accessing the internet can be a hassle, especially when you aren't using the same operating system as what the directions were originally written for. This article is a starting point for configuring DSL using Ubuntu Linux.
Steps
Download Article
-
Open Network Connections to set up network settings in Ubuntu. Go to “System”, “Preferences” and chose “Network Connections." -
Under the “Wired” tab, click on “Auto eth0” and select “Edit."Advertisement -
Click on “IPV4 Settings” tab. Chose the “Automatic (DHCP)” option if your network has a DHCP server. The DHCP Server has automatically assigned the IP address to your system. Click "Apply."- You also chose the “Manual” option from the Method drop-down list and assign the IP address, netmask and gateway manually. You'll also have to assign the DNS Server address. Click "Apply."
-
Check the IP address settings. Go to “Applications” “Accessories” and chose “Terminal." -
Type the following command into terminal: “sudo ifconfig” without quotes. -
Get your new addresses. The Ifconfig command will show the inet address, broadcast address and mask address.
Advertisement
Community Q&A
Search
-
QuestionHow do I check the LAN connection on Ubuntu?Community AnswerOpen Network Connections to set up network settings in Ubuntu. Under the “Wired” tab, click on “Auto eth0” and select “Edit." Click on “IPV4 Settings” tab. Check the IP address settings. Type the following command into terminal: “sudo ifconfig” without quotes. Get your new addresses.
-
QuestionHow do I find the DHCP client ID?Community AnswerOpen terminal and type "ipconfig." You'll find your Adapter name there, the IP address, and the broadcast address too.
-
QuestionAfter choosing Terminal, I don't see any option to write a command. What can I do?SomoneCommunity AnswerThere is no 'option'. You can type in the command and press Enter on your keyboard, and it will run the command.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- If you have another way to get online, and don't understand what your service provider has told you (or if they can't help because they do not offer anything besides help with Windows), use an IRC chat program (such as MIRC or XChat) to connect to irc.freenode.net. Type /join #ubuntu and ask your questions there. You will not find out the IP address for your DSL router, but any Ubuntu specific questions should be answered.Thanks
- If you have an ethernet modem instead of a router, you can use the command PPPOECONF, and a wizard will guide you through the configuration steps of a PPPoE Connection.Thanks
- If you have a Live CD, try booting from that. If it successfully configures the network connection, open System->Administration->Networking and make a note of the settings. Reboot to the installation, and apply those settings, and it should work.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- If you are inexperienced with computers, don't do anything that you are not told to do. You can do more harm than good by not following directions provided by technical support, and it could mean that you have to spend more time setting things up for DSL because your box may need to be reset.Thanks
Advertisement
References
- Find help and support at http://www.ubuntuforums.org
About This Article
Thanks to all authors for creating a page that has been read 453,560 times.
Advertisement
