PDF download Download Article PDF download Download Article

Sharpening a pencil correctly can be important, especially if you are an artist or just want your handwriting to look smooth. In fact, it can be an artisanal skill. There are several different ways you can sharpen a pencil.

Method 1
Method 1 of 3:

Using a Pencil Sharpener

PDF download Download Article
  1. Watermark wikiHow to Sharpen a Pencil
    These usually come with two holes in a small plastic square. One hole is for a smaller pencil, and one is for a larger one.
    • The benefit of using a manual sharpener is that they are cheap and portable. Again, if you’re not careful, you can create an irregular pencil point.
    • Simply put the pencil into the sharpener’s hole, and turn it several times to create a point. Sharpen over a garbage can, unless the sharpener has a plastic bubble designed to capture the shaving remnants.
  2. Watermark wikiHow to Sharpen a Pencil
    Try using an electric pencil sharpener. An electrical pencil sharpener will create a pencil that makes a very neat line. Push the pencil into the hole in the sharpener. The sharpener will make a whirring sound as it sharpens the pencil. [1]
    • A downside of electric pencil sharpeners can be irregular sharpening. However, they are the easiest to use. Choose a pencil that is worth sharpening. The pencil’s lead (the graphite core) should not be off-center or it will be hard to shape into the normal conical point shape. Make sure the pencil is not bowed.
    • Use an old rag in order to wipe the residue off the pencil after you sharpen it. [2]
  3. Advertisement
Method 2
Method 2 of 3:

Sharpening a Pencil With a Knife

PDF download Download Article
  1. You want to grab the pencil near its point if you are sharpening it with a knife, about 1 ½ inches from the end of the pencil. This will stabilize the pencil. Hold the pencil in your non-dominant hand, and the knife in your dominant hand. [3]
    • You want to make sure the utility knife is sharp. You can sharpen your knives (carefully) with a knife sharpening stone or steel. Position the knife about ¾ of an inch up the shaft of the pencil. Start to remove the wood. Expose the graphite that is within the pencil itself.
    • Push the blade of the knife through the pencil’s wood with your thumb holding the pencil. Push the knife toward the unsharpened end of the pencil as your non-dominant hand rotates the pencil. A thumb knuckle’s length away from the end of the pencil is how deep you want to go. Once you’ve exposed the graphite, you can shape it into a point.
  2. Watermark wikiHow to Sharpen a Pencil
    You’re ready to refine the graphite when it’s showing about 3/8th of an inch. Keep the blade’s steel on the graphite. Hold it as a low angle. You don’t want to remove too much material. [4]
    • If your knife doesn’t cut through the pencil’s wood easily, it’s probably too dull. If the lead of the pencil is soft, cut small bits away of the wood at a time. If your pencil sharpener will not sharpen the pencil well, check that the space where the pencil tip should go is not blocked by broken graphite (the black part) from the tip of the pencil. If it still will not sharpen well, the blade in the sharpener may be blunt. Do not jam in the pencil too hard.
    • Knives are very versatile tools for sharpening pencils. Make sure you cut in a direction away from your body for safety purposes. Use a utility knife. Hold the edge of the knife so it faces the pencil’s tip. Put your non-dominant hand’s thumb on the non-sharp edge. [5]
    • Use your thumb to push the knife out with your thumb. At the same time, press down with the thump that is holding the knife. You could put a garbage can in front of you between your legs to catch the scraps.
  3. Watermark wikiHow to Sharpen a Pencil
    Take a utility knife. Hold the pencil firmly in one hand and make sure the tip is pointing away from you. [6]
    • Use slow and certain strokes in an outward direction to sharpen the pencil. You can also use a special carpenter's pencil sharpener. Insert the pencil into the hole, and slide it back and forth against the blade of the pencil sharpener.
    • Try an X-Acto knife. These are good for charcoal pencils because charcoal is soft and can be damaged by electric sharpeners. Worse, the charcoal can damage the sharpener if it gets stuck in it.
  4. Advertisement
Method 3
Method 3 of 3:

Refining the Pencil’s Point

PDF download Download Article
  1. There are four points to choose from when sharpening your pencil. The most common is the standard point. It’s a sharpened point that resembles a cone. [7]
    • A chisel point is created by using a knife to cut the end of the pencil into a chisel shape. This allows people to draw two types of lines with the pencil; the tip creates a thinner but darker line, and the flat sides of the chisel point create wider lines with softness to them.
    • The chisel will keep itself sharp as you draw. However, the chisel point can be harder to draw with unless you’re practiced at it. Artists sometimes use this pencil point.
    • The needle point is a sharp concave point carved with a knife. It is a very fine point and can be prone to breaking. However, it’s good for use in drawings with needle-point detail. Carve the wood around the pencil down more deeply to expose more of the graphite.
    • A bullet point pencil carves away wood from the pencil’s last centimeter. Then carve the end into a bullet shape with a knife. You can make many different types of lines with a bullet point.
  2. Watermark wikiHow to Sharpen a Pencil
    A good trick is to use a little bit of sandpaper to sharpen your pencil when the graphite gets a little worn down.
    • This way, you can sharpen the pencil without having to go through the full sharpening process each time. Many artists keep pieces of sandpaper next to their drawing boards for this purpose.
    • Another method is to buy charcoal pencils that are paper wrapped. All you need to do is pull the string on such a pencil to peel off a bit of the paper to expose more of the graphite.
    • Using sandpaper or a sand pad will also polish the charcoal. You don’t want to see indentations when you draw a straight line. [8]
  3. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What do I do if I use a manual sharpener, but it stops working after a few tries?
    Community Answer
    Look inside the sharpener’s hole, there could be a piece of lead blocking it. Remove the lead and that should solve your problem.
  • Question
    How do I prevent the pencil tips from breaking when manually sharpening them?
    Community Answer
    Don’t oversharpen. You should check the tip of your pencil frequently when sharpening.
  • Question
    Can I use construction paper to sharpen a pencil?
    Community Answer
    Sort of. If there is no lead poking out of the wood, then no. You can use construction paper to make the lead sharper, though, just scrape the side onto the paper until it is sharp.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      • If your pencil breaks very regularly, you may be sharpening it too much or the graphite in your pencil may have been broken. Or, you may be pressing too hard on the paper. .
      • Instead of an old-fashioned sharpener, you can buy the ones with a built-in container to hold the shavings. This way, you don't have to keep walking back and forth to the garbage can.
      • Another type of mechanical pencil sharpener has a crank, which you turn clockwise while pushing the pencil in slightly. (operational phrase being 'pushing' slightly)
      Show More Tips

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • Don't be afraid of lead poisoning. Pencil "lead" is an old term from when pencils truly contained lead, a metal soft enough to leave a residue when rubbed on things. Almost all modern pencils contain no actual lead (atomic symbol Pb) but are instead made of graphite and glue. The graphite rod flakes apart and sticks to the paper via the glue. Pure graphite is 100% carbon.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      About This Article

      Article Summary X

      To sharpen a pencil with a utility knife, hold the pencil in your non-dominant hand and the knife in your dominant hand. Next, position the knife about ¾ inch up the shaft of the pencil and push the blade through the wood toward the unsharpened end. Then, slowly rotate the pencil with your non-dominant hand as you continue pushing the blade through the wood until the graphite is exposed. Continue shaping the wood until the pencil point reaches the desired sharpness. You can also use sandpaper to hone the graphite down to a finer point! For more tips on refining the point, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 257,445 times.

      Reader Success Stories

      • Wanda Payne

        Jan 12, 2019

        "I just recently got watercolor pencils, so I appreciate finding ways to sharpen them. Thank you."
      Share your story

      Did this article help you?

      Advertisement