Download Article
Download Article
Perhaps one of your friends has mentioned that they prefer to sharpen pencils with a knife. Or maybe you just need to sharpen a pencil but don’t have a sharpener. Either way, sharpening pencils with a knife is not only especially practical, it is an art in itself. Knife-sharpened pencils offer more variability in terms of the shape and utility of the pencil’s tip. Even if you’ve never carved anything before, you can safely learn to sharpen a pencil with a knife.
Steps
-
Choose a pencil. Your everyday #2 graphite pencil can be sharpened just as well as any other. The most notorious knife-wielding pencil sharpeners are artists who draw with pencils that are very similar to these standard pencils, with different hardness ratings for the graphite core.- The higher the graphite rating, the harder the graphite core, and the lighter the mark made by a pencil applied with a constant pressure. [1] X Research source
-
Choose a sharp knife. A very shape knife is the best tool there is for sharpening pencils. Believe it or not, there are knives designed specifically to sharpen pencils. [2] X Research source However, even a standard pen knife will do. You can also use a knife with a fixed blade, a utility knife, or a razor blade that fits into a handle, such as an X-Acto knife. [3] X Research source The important thing is that the blade is very sharp. Regardless of the knife you choose, make sure it is sharp enough to easily cut through the wood of a pencil.Advertisement -
Hold the pencil correctly. Hold the pencil with your non-dominant hand with the writing tip pointed away from you. (If you are right-handed, hold the pencil in your left hand.) Grip the pencil with only enough protruding from your hand to allow you to sharpen the tip – probably about 2 inches. -
Hold the knife correctly. Use your dominant hand to hold the knife. Hold the handle horizontally in your palm, with the blade coming out of the thumb-side of your grip and the sharp edge of the blade on the pencil.- Always point the blade away from you, with only the end of the pencil you wish to sharpen in front of the sharp edge. Don’t ever push or pull the blade towards your fingers. Don’t ever pull the blade towards your body.
Advertisement
-
Position the blade at a shallow angle. Place the sharp edge of the blade against the pencil about an inch above the lead. Hold the knife so that the blade is horizontal to the pencil, but tilted back so that the back side of the blade is closer to you. -
Cut small strips of wood from the pencil. Use the thumb on the hand that is holding the pencil to push the blade through the wood. Reduce the pressure on the blade as it meets the marking core. Do not force the blade with the knife hand at any point. Rotate the pencil slowly and consistently with each stroke of the blade. Maintain the angle of the blade throughout the cut.- Use both thumbs to push on the back of the blade if you need to. When using two thumbs, push especially slowly and with particular care.
- The strips of wood should be thin enough to ribbon or curl as they separate from the pencil.
-
Reposition the blade on the pencil. Try to move the pencil forward after you complete a cut, as opposed to moving the blade backward. This may feel more comfortable. In between cuts, reposition the knife and pencil relative to one another however you’d like, but do so in a consistent manner. Place the blade the same distance from the tip as the previous cut. -
Taper the wood up to the core. You want a very long point that tapers from the beginning of your cuts to a very sharp point at the very tip of the marking material. The longer the taper is, the stronger the tip. Remember, the shallower the angle of the blade, the longer the taper.
Advertisement
-
Taper your pencil’s graphite core. If you have reduced pressure as you reached the writing core, the tip of the pencil will need a bit of touch up to complete a smooth taper. Hold the blade horizontal to the pencil, but vertically. Brush against the pencil tip very lightly, rotating with each stroke. -
Sharpen a charcoal pencil. As described above, remove the wood first, rotating as you cut off consistently-sized pieces of wood, and leaving the rod of charcoal intact and exposed. When you have at least a ½ inch of charcoal exposed, sand the charcoal to a sharpened point. Use a sanding block, and rub the pencil against it at a consistent angle. Choose whichever angle you prefer, but hold the angle consistently. Use a shallow angle for a sharper tip. Sand very lightly, as charcoal is especially fragile. Rotate the pencil as you’re sanding for a smooth, sharp tip. [4] X Research source -
Practice. Perfect your technique by practicing. Sharpen multiple pencils in slightly different techniques. This will give you practice, as well as differently-shaped tips that you can use for different types writing or drawing. -
Sharpen a carpenter’s pencil. A carpenter’s pencil has a wide, rectangular shaft that cannot be sharpened with a traditional pencil sharpener. It is harder to rotate as you remove strips of wood, though a conical tip is unnecessary (and impossible) given these pencils’ shape and strength. To sharpen a carpenter’s pencil: [5] X Research source- Use a utility knife to remove wood starting roughly ¾ inch from the end you want to sharpen.
- Push the blade through the wood with the thumb of the hand holding the pencil.
- Use your knife hand to maintain a consistent blade angle.
- Don’t worry as much about precision and consistency with carpenter’s pencils. Both the wood and the graphite core are thicker than in other pencils, and they can handle some variability in your stroke.
Advertisement
Community Q&A
Search
-
QuestionHow long does it take to sharpen a pencil with a knife?Community AnswerIt shouldn't take longer than 5-10 minutes.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Cap your newly sharpened pencils. Protect both your pencil tip and the clothes and skin that might otherwise get poked. Get covers at an art supplies store or online. Pencil boxes are another option, though they protect your pencil tips less effectively.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be extremely careful. Again, never position your fingers in front of the sharp edge of the blade. Be conscious of anyone around you. Make sure they know you are holding something sharp.Thanks
Advertisement
References
About This Article
Thanks to all authors for creating a page that has been read 167,011 times.
Reader Success Stories
- "I teach Design in a school. My sixth graders did not believe there was a need to sharpen pencils with a knife. This page X-Actly proves my point that sharpening pencils with a knife is an art in itself." ..." more
Advertisement
82%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I teach Design in a school. My sixth graders did not believe there was a need to sharpen pencils with a knife. This page X-Actly proves my point that sharpening pencils with a knife is an art in itself."
..."
more
"Article was informative; language terse. Love it."
