How to Solder Wires, Electronics, and More

PDF download Download Article
Learn to use a soldering iron for pipes, gadgets, and more
PDF download Download Article

Soldering is a widely used and effective way to bind metal components together. Soldering irons are super easy to use, and all it takes is a little practice and some safety precautions to have you soldering like a pro. With safety gear on, heat up your iron and touch it to the metal pieces you want to join. When they’re hot, touch the soldering wire to them to melt it and fill in the space between them. This article will introduce you to the basics, as well show you how to solder common things like electronics and pipes.

Soldering Metal at a Glance

Plug in your soldering iron and heat it to the desired temperature while you put on gloves and goggles. Gently touch the hot iron to the components you want to join, then touch the solder wire to them. Allow the solder to melt and fill the space in order to join the pieces, then remove the wire and iron to cool.

For popular FAQs on soldering metal, jump to more common questions .

Section 1 of 3:

Soldering Basics

PDF download Download Article
  1. Put into basic terms, soldering is the process of melting a metal onto other metal components in order to bind them. [1]
    • Soldering differs from welding. In welding, the component pieces are melted together; in soldering, a softer metal with a lower melting point is used to connect them. [2]
      • Because soldering doesn't melt components, it's useful for more delicate applications, such as electronics work, or plumbing.
    • The purpose of soldering is to bind two other components. Solder can be thought of as a sort of “metal glue.” It can be used to fill in gaps or hold pieces in place, but doesn't serve any more complicated purpose.
      • Since solder is metallic, it conducts electricity, which is another reason it's so popular for connecting electronic components.
  2. Solder is the name of the actual material used in soldering. Historically, many solders contained lead or cadmium, [3] but that has been recently phased out for health reasons.
    • Solder is typically composed of two or more metals combined into an alloy. Silver, antimony, copper, tin, and zinc are all common ingredients.
    • Solder is soft and flexible. It generally comes in a coil, or spool, that can be stretched and bent.
    • Solder has a low melting point, and cools extremely quickly after it's been melted. [4] (350F - 500F)
    • Solder can contain a flux core of natural rosin (tree sap) or a chemical acid. The metal of the solder encircles the core, like a tube.
      • The purpose of the core is to serve as a flux, or purifying agent. The flux prevents oxidation in the solder as it cools, keeping it strong and pure.
    Advertisement
  3. Soldering irons come in various configurations, but are essentially straight tools with tips that can be heated to melt solder in place. [5]
    • Most soldering irons typically heat to between 800 and 900 degrees Fahrenheit, so exercise caution when using one. [6]
    • Soldering irons tend to catch a veneer of solder after each use, which can oxidize and reduce the iron's effectiveness on the next use. To clean this off easily, secure a wet sponge before you turn your iron on, and gently drag the tip across the sponge once the iron is heated.
      • A layer of fresh solder on the tip can actually make a soldering iron more effective. This process is called “tinning,” and is done by allowing a bit of fresh solder to melt evenly over the tip before use.
    • Better models of soldering iron come with a heat control that can be adjusted for different projects and types of solder.
  4. Soldering isn't especially dangerous or difficult if you take sensible precautions. To solder as efficiently and effectively as possible, there are a few useful pieces of equipment you should have.
    • Clamps or alligator clips, for holding components in place while you solder them
    • Thick gloves, to protect your hands from the tip of the iron as you feed solder to it
    • Safety glasses or goggles, to prevent any errant solder flecks from hitting your eyes
    • A solder stand to rest your soldering iron on between applications.
  5. Be sure you can see everything clearly so that your work will be as accurate as possible.
    • If you need to solder somewhere without much light, bring a bright light (such as a portable lamp) with you.
  6. Even without lead in the mix, solder and flux can produce harmful fumes. Avoid breathing in rosin or metal fumes by opening a window, turning on a fan, and generally doing whatever you can to keep air fresh. [7]
  7. Soldering is a fast process, and it doesn't generally take more than a few minutes to do what needs to be done, but if you find yourself spending more than 15 or 20 minutes on a project, take regular breaks for fresh air.
    8. Advertisement
Section 2 of 3:

Solder Electronics

PDF download Download Article
  1. Most electronic component soldering is done to fasten components to a PCB (printed circuit board). Therefore, an iron with a smaller tip is recommended. Consider a small flathead tip for ordinary work, or a conical point tip for fine detail soldering.
    • Soldering irons don't have exchangeable tips, so you'll need to buy the one(s) you want. Fortunately, they start at around $15 in price, and a good quality iron can be had for around twice that.
    • A typical soldering iron for electronics work will be a 40-watt iron that has a temperature (or a temperature setting) of 900 degrees. This allows the iron to easily melt electronics solder without damaging the small wires of the components themselves.
  2. Both solid wire and Rosin-cored solders area available at stores and online. [8] Be sure the solder you choose will bond to the materials you are trying to solder. Using solid wire solder may require a separate flux to break the oxide coating and allow the solder to bond.
    • Flux is applied when soldering to facilitate the flow of solder and remove oxides from the surfaces joined.
    • It is typically applied before heating the joint.
    • Flux can be in the form of a paste or a liquid. You can use it to clean the surfaces and wet the solder.
    • 60/40 tin and lead solder used to be the standard for electronics soldering, however due to the toxicity of lead it has fallen out of favor. Tin and silver solder is generally preferred today. The silver raises the melting point slightly to 430F, raises the price, but helps the solder to bind more smoothly.
      • The numbers in solder descriptions are percentages of the element in the solder alloy. (60Sn/40Pb = 60% tin and 40% lead)
  3. Plug in the iron and let it warm up on its stand for a few minutes. Be sure to gently wipe it across a sponge if it's been used previously, as described above. Tin it (as described above) once it's clean. When you're ready, set out your components, clips, and solder. [9]
  4. Put a component in the spot you want to solder it. If soldering to a PCB, be sure the wires of the component are appropriately placed through its pinholes. [10]
    • For most components, use a small clip or clamp to hold them in place once you've set them.
  5. Hold a length of solder with your non-dominant hand. Use a long length to ensure that you'll be able to keep your hand well away from the tip of the iron.
  6. Touch the tip of the iron to the component you want to solder. Only touch it for about one second. This warms the metal so that it can handle the solder more flexibly. [11]
    • Quickly touch your solder wire to the soldering point, and apply the iron to it. The solder should melt immediately. Soldering to a PCB board should never require more than about 3-4 seconds' worth of molten solder.
    • If more solder is required to secure the connection, feed it smoothly with your hand.
    • Your solder should pool loosely, forming concave sides as it spreads around the component wire. It shouldn't ball up or look lumpy.
  7. Pull the solder wire away first, wait one second, and then pull the iron away from the soldering point to let the molten solder cool. Again, this should only take 5 or 10 seconds at most.
    • Be sure not to blow on the solder or otherwise try to help it cool. This can make it lumpy or add impurities.
  8. Repeat the above steps for each point you wish to solder.
    • Re-tin your iron's tip every several applications, and once more before you put the iron away. This helps extend the life of the iron. [12]
    9. Advertisement
Section 3 of 3:

Solder Pipes

PDF download Download Article
  1. Soldering copper pipes isn't hard, but it is considerably more involved than soldering electronics, and requires different equipment. People typically engage in pipe soldering to seal joints between sections of pipe, such as elbow turns. [13]
  2. Instead of a soldering iron, a propane torch is generally recommended for soldering copper pipes together. These are widely available at hardware stores. [14]
    • Specialized soldering irons can be used for pipe soldering, but a propane torch is just as effective for most jobs, and much cheaper.
  3. Manufacturers offer specialized solder wire for soldering pipes. It tends to be much thicker, usually 1/8" in diameter. Pipe solders often contain an acid flux, however solid wire works as well. Solid wire solder may need a separate flux. [15]
    • Absolutely avoid using leaded solder for soldering your pipes. Be sure to closely read the label to determine the alloy composition. Pipe solders tend to compose mostly tin and may also contain antimony, copper, and/or silver.
  4. To be sure your solder takes, it's helpful to clean the pipe beforehand by scouring it with an emery cloth, sandpaper, or fine steel wool. [16]
  5. Turn off the water to your plumbing before you begin work. This will allow you to work with your pipes without fear of flooding or spraying the room. [17]
    • Before you turn the water off, pour a bucket of water. Keep the bucket nearby in case your torch catches anything on fire.
  6. If you're installing new piping, use a tube cutter to cut any pipe up to an inch in diameter. [18] Tube cutters are available at hardware stores.
    • Take it slowly. A tube cutter works best with slow, steady movement. Go too quickly and you might dent the pipe.
    • For larger pipe, you'll have to use a hacksaw. File off the ragged edges afterward.
    • Once the pipes are cut, fit them into whatever joints you'll need to solder tight.
  7. Using an emery cloth or similar abrasive item, thoroughly abrade the area of pipe where you'll be applying solder to smooth and clean it. [19]
    • A smooth and clean surface will allow the solder to flow into the joint smoothly and seal it evenly.
  8. Fire up your propane torch and apply heat to the pipe you plan to solder. [20]
    • Maintain even heat by moving the flame all around the work area.
    • Once the pipe is good and hot, apply the tip of your solder wire to the place you need to seal. It should melt right away.
      • Hold the solder on the opposite side of the pipe from your torch. It should flow around the joint and fill it up all the way around.
    • Let the joint cool. It will cool quickly. Move on to the next joint that needs sealing, if necessary.
  9. Once you're finished, wait a few minutes and then turn the water back on. Run water through the pipes you soldered and check for leaks. If there are any, you'll have to repeat the process.
    10. Advertisement

Common Questions: Soldering Metal

What metals cannot be soldered?

Metals like cast iron, titanium, high alloy steel, stainless steel, aluminum, aluminum bronze, and chromium are very difficult to solder and require special pre-cleaning treatments or aggressive soldering tactics. Metals like tin, gold, silver, copper, bronze, brass, and nickel are much easier to solder.

Why is my solder not sticking to metal?

Your soldering iron or the metal parts you’re soldering may not be hot enough. It’s also possible that the solder tip (or the pieces you’re soldering) have oxidized or are dirty. Clean your equipment and metal before trying again, then try increasing the soldering temperature. [21]

Do you need flux to solder metal?

Generally, yes. Flux is an important component of soldering that cleans and deoxidizes metal surfaces, allowing your solder to flow without balling up and form a true metallurgical bond between the metal components.

Video

Tips

Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Submit
Thanks for submitting a tip for review!

Warnings

Advertisement

Things You'll Need

  • A soldering iron or propane torch
  • Appropriate solder for your application.
  • A solder stand
  • Clips or clamps for holding components in place
  • Components to solder
  • Safety equipment
  • A tube cutter or hacksaw, if cutting pipe
  • Abrasive material for smoothing pipe

You Might Also Like

How to
Treat a Burn
How to
Solder Electronics
How to
Desolder
How to
Make an EMP Generator from a Disposable Camera
How to
Make a Simple Electric Generator
How to
Use a Multimeter
How to
Make a Simple Electrical Circuit
How to
Build a Motor
How to
Convert AC to DC
How to
Make a Tesla Coil
How to
Mount and Wire a Junction Box
How to
Make a Burning Laser
Simple Electric Motor Project: Materials & Instructions
How to
Build a High Powered Laser
Advertisement

Expert Interview

Thanks for reading our article! If you’d like to learn more about welding, check out our in-depth interview with Jones Welding & Industrial Supply Company .

References

  1. ↑ https://www.dummies.com/programming/electronics/what-is-soldering-and-how-do-you-use-solder-tools/
  2. ↑ https://www.machinedesign.com/fasteners/whats-difference-between-soldering-brazing-and-welding
  3. ↑ https://www.mayoclinic.org/diseases-conditions/lead-poisoning/symptoms-causes/syc-20354717
  4. ↑ https://www.youtube.com/watch?v=Cay_AI8myZo
  5. ↑ https://www.thisoldhouse.com/tools/21015217/how-to-use-torches-heat-guns-and-soldering-irons-and-when
  6. ↑ https://www.dummies.com/education/science/safe-soldering-checklist/
  7. ↑ https://safety.eng.cam.ac.uk/safe-working/copy_of_soldering-safety
  8. ↑ https://www.sciencebuddies.org/science-fair-projects/references/how-to-solder#materials
  9. ↑ https://www.sciencebuddies.org/science-fair-projects/references/how-to-solder#preparing
  1. ↑ https://www.sciencebuddies.org/science-fair-projects/references/how-to-solder#soldering
  2. ↑ https://www.sciencebuddies.org/science-fair-projects/references/how-to-solder#soldering
  3. ↑ https://youtu.be/2VlvjdaMARM?t=112
  4. ↑ https://www.familyhandyman.com/plumbing/how-to-solder-copper-pipe/
  5. ↑ https://www.familyhandyman.com/plumbing/how-to-solder-copper-pipe/
  6. ↑ https://www.familyhandyman.com/plumbing/how-to-solder-copper-pipe/
  7. ↑ https://www.familyhandyman.com/plumbing/how-to-solder-copper-pipe-joints/
  8. ↑ https://www.dummies.com/home-garden/plumbing/pipes/finding-the-main-water-shutoff-valve/
  9. ↑ https://www.familyhandyman.com/plumbing/how-to-solder-copper-pipe-joints/
  10. ↑ https://www.familyhandyman.com/plumbing/how-to-solder-copper-pipe-joints/
  11. ↑ https://www.familyhandyman.com/plumbing/how-to-solder-copper-pipe-joints/
  12. ↑ https://www.gordakelec.com/news/five-reasons-your-solder-wont-stick.html

About This Article

Article Summary X

If you want to solder something, you’ll need some solder, which is a soft metal that is easy to melt and cools quickly. You’ll also need either a soldering iron or a torch to heat the solder so that it can adhere to the surface that you’re working on. Safety is important while soldering, so be sure to wear safety gear and work in a well-lit and ventilated area. Now that you’re prepared, you can use solder to repair electronics, plumbing pipes, and other metal fixtures. If you want to learn how to properly solder the electronics, keep reading the article!

Did this summary help you?
In other languages
Thanks to all authors for creating a page that has been read 281,737 times.

Reader Success Stories

  • Glynn Brown

    Jun 22, 2020

    "Needed to revise and check my memories and understanding of soldering. I've been doing it over 50 years, ..." more
More reader stories Hide reader stories
Share your story

Did this article help you?

Advertisement