How to Stain and Seal Butcher Block

PDF download Download Article
Protect your beautiful countertops from moisture & damage
PDF download Download Article

Butcher block is a stylish, durable, and budget-friendly alternative to traditional kitchen countertops. Because butcher block is made out of wood, it needs to be sanded, stained, and sealed to make it water and damage-resistant. Luckily, it’s super easy to do. Just keep reading to learn how to finish your butcher block counters!

Things You Should Know

Part 1
Part 1 of 3:

Sanding the Butcher Block

PDF download Download Article
  1. Sand the wood with 80-grit sandpaper . Sanding the butcher block with coarse sandpaper removes any existing scratches, stains, and varnishes on the wood’s surface. Just sand along the grain of the wood using long strokes.
  2. Fill any cracks in the wood with sawdust and wood glue . Collect the sandpaper dust on the butcher block and mix it with enough wood glue to form a thick, putty-like consistency. Then, spread the putty into any cracks or marks with your fingers or a wooden craft stick. [1]
    • Let the homemade putty dry overnight.
    • Alternatively, fill the wood cracks with wood putty or filler sticks.
    Advertisement
  3. Sand the wood with 150-grit sandpaper and wipe off the dust. Fine-grit sandpaper removes any leftover marks and smooths the wood down for a more even staining. Simply sand the butcher block using long strokes in the same direction as the wood grain. Then, wipe off the sandpaper dust with a clean tack cloth , rag, or paper towel.
    • Alternatively, vacuum up the dust and debris.
  4. Brush on wood conditioner and let the butcher block dry overnight. Wood conditioner soaks into the butcher block to help prevent your stain from looking blotchy. Just use a 3-inch (7.6 cm) paintbrush to apply an even layer of conditioner on the butcher block using long, even strokes in the direction of the wood grain. [2]
  5. Sand the butcher block with 120-grit sandpaper and wipe up the dust. Go over the entire surface of the butcher block with 120-grit sandpaper, or finer (150-220-grit), to remove any bumps or spots of discoloration. [3]
    6. Advertisement
Part 2
Part 2 of 3:

Staining the Butcher Block

PDF download Download Article
  1. Use mineral oil , or choose an oil or water-based stain. If you plan to prepare food directly on the butcher block, use mineral oil. It is a food-safe option that adds a natural sheen to the wood. [4] If you don’t plan on preparing food on the butcher block and you want to change the wood color, opt for an oil or water-based stain. Oil-based stains are longer-lasting, more resistant to water and stains, and easier to apply while water-based stains dry quicker and are more environmentally friendly.
    • When you stain with mineral oil, you have to reapply it once per month. This keeps the butcher block from drying out and cracking.
    • Some stains, like Watco Butcher Block Oil + Stain are food-safe and provide color.
    • Choose a stain color that compliments your kitchen cabinets, backsplash, and walls.
    • Bring home several stain samples to see what color you like, like a dark, walnut color, a reddish cherry color, or a light, pine-colored stain.
  2. Use a 3-inch (7.6 cm) paintbrush to apply an even line of stain on a hidden part of the butcher block. Then, wipe the stain with a clean cloth. After 2 hours, look at the stain to see if you like the color and finish. If the wood has an even, consistent tone and the stain brings out the texture of the wood grain, you’re ready to stain the entire counter! [5]
    • Use a clean rag to apply the stain instead of a brush, if you prefer.
    • If you have any spare wood from the butcher block, test the stain on that instead.
    • If the stain looks blotchy or has an uneven tone, use a different color or brand of stain.
  3. Dip your paintbrush or rag in the can of stain and slide it against the side to remove excess stain. Just work in small sections and apply the stain using long, even strokes that go in the direction of the wood grain. [6]
    • For your safety , work in a well-ventilated area. Turn on a fan, open the windows, or wear a respirator mask so you don’t breathe in the harsh fumes.
    • Wear gloves, an apron, and goggles to prevent the stain from splattering on your skin.
    • Make sure to stain the top, sides, and bottom of the butcher block if it’s visible.
  4. Work in the direction of the wood grain to remove any excess stain sitting on top of the wood. This helps even out your application and prevents the stain from drying splotchy. [7]
    • Or, leave the stain on the wood for no longer than 15 minutes before wiping it off. The longer you leave it on, the darker the stain appears. [8]
  5. Read the back of the stain to find out how long it needs to dry between coats. This can range anywhere from 1 hour to 48 hours, depending on the stain you’re using. [9]
    • Avoid touching or setting any objects on the wet stain during this time.
  6. If you want a darker butcher block, apply a second thin layer of stain, working in the direction of the grain. Wipe off the excess stain and wait for it to dry according to the can instructions before applying more coats. [10]
    • If your butcher block feels rough to the touch, sand it with 220-grit sandpaper or a brown paper bag in between each stain application.
    • When you’re satisfied with the color of the butcher block, let it dry overnight.
    7. Advertisement
Part 3
Part 3 of 3:

Sealing the Butcher Block

PDF download Download Article
  1. Apply tung oil or Waterlox on the dry butcher block. Both tung oil and Waterlox are food-safe sealants that protect your butcher block from water, stains, and damage. Just dip a clean paintbrush or rag into the sealant and apply it onto the wood in long, straight strokes that move in the direction of the grain. Then, wipe away excess oil with a clean rag. [11]
    • If you used mineral oil to stain the butcher block, you do not need to seal the wood. Mineral oil acts as both a stain and sealant.
    • If you don’t plan on preparing food directly on the block, use polyurethane . Just use an oil or water-based formula depending on the stain you used.
    • Polyurethane typically provides more durability and greater water resistance than tung oil.
  2. Wood is susceptible to water and damage, so it’s important to apply multiple layers of sealant to protect it. Just allow the first coat to dry for 1 day. Then, dip a brush or rag in the sealant, apply it along the wood’s grain, and let it dry for 24 hours between each additional coat. [12]
    • If desired, use 220-grit sandpaper , or finer, to smooth out the sealant in between each coat.
    • Warning : Separate your used rags and brushes and leave them outside to dry completely before disposing of them. Oil-based sealants can spontaneously combust when they’re left in a wet pile. [13]
  3. Sealants take time to soak into the wood and completely dry, even if your counter feels dry to the touch. Just avoid using your counter for 7 to 14 days to give the wood time to cure. [14]
  4. Tung oil and Waterlox dry out over time, which can leave your wood vulnerable to cracks and damage. Just reapply either sealant about once per month, or when your counter starts to look faded or dry. [15]
    • Additional coats don’t need a full week to dry. To be on the safe side, though, give each layer 3 to 4 days to cure before using the countertop.
    • Polyurethane sealant typically needs to be reapplied every 1 to 2 years, or when it starts to look dull and faded.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can you restain a butcher block?
    Sam Hubbard
    Professional Carpenter
    Sam Hubbard is a Professional Carpenter and the Owner of Highlands Remodeling. He has over 19 years of experience in the carpentry industry. Sam specializes in both home remodels and custom woodworking projects. Highlands Remodel has been recognized for their kitchen remodels, home woodworking projects, cabinetry, closet installations, and handyman services. Highlands Remodeling serves communities throughout both North and South Carolina, and holds an official certification from the Association of Certified Handyman Professionals (ACHP). Sam and his company take pride in their ability to transform their client’s existing spaces into something truly remarkable.
    Sam Hubbard
    Professional Carpenter
    Expert Answer
    Sure, but first you must sand it down to bare wood using 120 sandpaper — follow that with 150 grit and work your way up to 180 grit. Remove the dust with a tack cloth and then apply the new stain.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    How do you finish a butcher block countertop with polyurethane?
    Sam Hubbard
    Professional Carpenter
    Sam Hubbard is a Professional Carpenter and the Owner of Highlands Remodeling. He has over 19 years of experience in the carpentry industry. Sam specializes in both home remodels and custom woodworking projects. Highlands Remodel has been recognized for their kitchen remodels, home woodworking projects, cabinetry, closet installations, and handyman services. Highlands Remodeling serves communities throughout both North and South Carolina, and holds an official certification from the Association of Certified Handyman Professionals (ACHP). Sam and his company take pride in their ability to transform their client’s existing spaces into something truly remarkable.
    Sam Hubbard
    Professional Carpenter
    Expert Answer
    After sanding, remove the dust with a tack cloth and apply three coats of polyurethane finish, sanding between coats with a #00 steel wool. After that, buff the surface with a piece of cardboard.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 4
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      You Might Also Like

      How to
      Fill Gaps between a Stove and the Countertop
      How to
      Repair a Chipped Quartz Countertop + Prevent Future Damage
      How to
      Remove a Scratch from a Laminate Countertop
      How to
      Remove a Countertop
      How to
      Install Quartz Countertops
      How to
      Cut a Quartz Countertop
      How to
      Repair a Crack in Granite
      How to
      Cut Countertops
      How to
      Clean Corian Countertops
      How to
      Replace Countertops
      How to
      Cut Corian
      How to
      Seal Granite Countertops
      How to
      Remove a Scratch from a Granite Countertop
      How to
      Install Granite Countertops
      Advertisement

      References

      1. ↑ https://youtu.be/rNZHNGIH6oE?si=PG5rQXCFVy1WWu3b&t=9
      2. ↑ https://www.thedecorformula.com/home/2021/3/23/how-to-stain-butcher-block-countertops
      3. ↑ https://www.thedecorformula.com/home/2021/3/23/how-to-stain-butcher-block-countertops
      4. ↑ https://www.bobvila.com/articles/sealing-butcher-block-countertops/
      5. ↑ https://www.oliveandjunehome.com/blog/how-not-to-stain-butcher-block
      6. ↑ https://www.consumerreports.org/home-garden/wood-stains/how-to-stain-your-deck-a1462288683/
      7. ↑ https://youtu.be/s88ljYuOetI?si=YTNjKSiXP2tsZIID&t=74
      8. ↑ https://youtu.be/kt7lrXy7D9A?si=Yecr8i9CsLMX_5OH&t=78
      9. ↑ https://www.consumerreports.org/home-garden/wood-stains/how-to-stain-your-deck-a1462288683/
      1. ↑ https://youtu.be/kt7lrXy7D9A?si=PguGwbGsVNVFQIhq&t=113
      2. ↑ https://www.bobvila.com/articles/sealing-butcher-block-countertops/
      3. ↑ https://www.bobvila.com/articles/sealing-butcher-block-countertops/
      4. ↑ https://www.consumerreports.org/wood-stains/oily-paint-rags-can-spontaneously-combust/
      5. ↑ https://generalfinishes.com/faq/what-difference-between-dry-time-and-cure-time
      6. ↑ https://www.bobvila.com/articles/sealing-butcher-block-countertops/

      About This Article

      Article Summary X

      To stain your butcher block, start by sanding the surface with a coarse sandpaper, which will remove any stains or varnishes. Then, sand the block again with a fine-grit paper to remove any marks left by the coarser sandpaper. After you wipe off any dust, brush on 1 layer of wood conditioner. After the conditioner dries, which typically takes 2 hours, sand the block one last time with a very fine sandpaper to remove any splotches or discoloration from the conditioner. Next, paint a layer of stain in long strokes along the direction of the wooden slats. Let the stain dry for 8 hours before applying the next layer. When the stain is completely dry, seal your butcher block by applying 5 layers of tung oil., Allow each layer to dry for a full 12 hours before using a rag to apply the next coat. To learn how to pick the right stain for your butcher block, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 248,127 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement