Download Article
Download Article
Ballet flats are a staple in many girls' closets. They can complete almost any outfit, and make it look chic, cute, or flirty. Unfortunately, it can take a while before ballet flats become comfortable enough to wear. This article will show you a few simple ways on how to stretch your ballet flats and make them more comfortable to wear.
Steps
-
Fill two, plastic resealable bags halfway with water and seal them tightly. The bags need to be big enough to fit inside your shoes. This method is best used for shoes that are a little tight in the toe area.
-
Place the bags inside the shoes. Tuck them down towards the toe area. If you are worried about the bags leaking, place them into another bag before putting them inside the shoe.Advertisement
-
Place the shoes into the freezer. If you are disgusted by the idea of sticking your shoes into the freezer, stick your shoes into plastic bags first.
-
Wait for the water in the bags to freeze. As the water freezes, it will expand and stretch your shoes.
-
Take the shoes out of the freezer and pull out the bags. If the bags are difficult to take out, let the ice melt a little. You can also try breaking the ice with a hammer.
-
Put the shoes on immediately. This will help them retain their shape, and ensure that they don't shrink while they warm back up.
Advertisement
-
Put on a pair of thick socks. [1] X Research source If you don't have any thick socks, put on two pairs of regular socks instead. The socks will help expand the shoes.
- This method is best for shoes that are just a little too snug.
- Use caution for this method. If the soles are glued on, the heat from the hairdryer can cause the glue to weaken and the soles to peel away. [2] X Research source
-
Turn on a hairdryer and point it at the shoes. Focus on the tight sections, such as the toes. The heat will help soften the material and make it more pliable.
-
Slip on your shoes and re-heat them with the hairdryer if needed. They will feel even more snug than before, but after you stretch them, they will feel just right.
-
Wear the shoes around your house until they cool. Give your toes a wiggle from time to time to help loosen them further. As the shoes cool down, they will retain the shape of your foot. This can take a while. Be patient, and don't take them off until they have completely cooled down.
-
Take the socks off and try on the shoes. They should be a bit larger than before, and more comfortable to wear. If they are still too snug, repeat the whole process again.
Advertisement
-
Prepare the shoes for stretching. Depending on what your shoes are made out of, you will need to either dampen them or heat them up. This method will work for most materials, including synthetics. Keep in mind, however, that leather stretches more than synthetic materials, such as vinyl and fabric.
- Dampen leather or fabric shoes. Warm water is the easiest, but can stain or discolor the leather. A leather stretching solution would be safer, if you can find it.
- Heat shoes made from vinyl or urethane with a hairdryer. Keep in mind that this can damage some vinyl or urethane surfaces.
-
Slip a shoe stretcher inside the shoe. Don't worry if the stretcher appears too small. You want it to fit loosely inside the shoe. If you have bunions, consider popping in the bunion attachment into the shoe stretcher first.
-
Twist the knobs clockwise until the shoe stretcher fits snugly inside the shoe. Keep turning until you see pressure on the surface of the shoe. Don't overstretch your shoe; three or four turns will do. You can always repeat the process again if the shoes are still too snug.
-
Leave the stretcher on overnight. While the shoes dry/cool down, they will keep that stretched shape.
-
Loosen the stretcher and pull it out the next morning. Turn the knobs counter-clockwise until the shoe stretcher returns to its original size. Pull the shoe stretcher out.
-
Try the shoe on to see if it fits. If the shoe is still too snug, repeat the process again. Keep in mind that some materials, especially synthetics, may return to their original size over time. If that happens, simply re-stretch your shoes.
Advertisement
-
Wear the shoe out. Most shoes will stretch out on their own, especially if they are made out of leather. If the shoe is just a little too snug and not painful to wear, consider wearing it around the house a few times. It will eventually loosen up and become more comfortable.
- Keep in mind that this will only loosen the shoe in the toe area. It won't work to make the shoe longer.
-
Try dampening the shoes with rubbing alcohol and wearing them. Spray the inside of the shoes with rubbing alcohol until they are damp. [3] X Research source Place them onto your feet and wear them until they dry. The wet material will stretch to the shape of your foot, and it will keep that shape once it dries.
- This method is best for stretching shoes in the toe area. It is not good for lengthening shoes.
- This method works best on shoes made from canvas , leather, and microfiber.
- If you have very sensitive skin, consider diluting the rubbing alcohol with some water first. You can also use just plain water.
- Consider doing a spot test first. Some materials do not react well with rubbing alcohol. [4] X Research source
-
Try using water and newspaper. Dampen the entire shoe with water, then pack the inside firmly with newspaper. Leave the shoes stuffed like this for 24 hours. Dampen them every four to eight hours, as needed. Let the shoes dry fully before you take the newspaper out and try them on.
- If you are worried about the ink staining your shoe, you can use a paper bag or butcher paper instead.
- You can also use olive oil, Goo Gone, or even petroleum jelly (Vaseline), but keep in mind that these may stain your shoe. Use the oil only once during the 24 hour period.
-
Take your shoes to a shoe repair shop. A professional will use his or her tools and experience to stretch your shoes until they fit. Usually, shoe stretching costs between $10 and $25, but this also depends on the shoe cobbler's experience. Keep in mind that shoes can only be stretched so much—about half a size.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- If you ballet flats chaff your feet too much, consider lining them with moleskin. You can also soften the inside with a nail file.Thanks
- Use an anti-blister balm on your heels and upper part of your feet, as you put on your shoes.Thanks
- Most shoes will loosen up and stretch out on their own the more you wear them.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Avoid cutting the elastic if your shoes come with them. This elastic keeps the shoes on your feet. If the elastic keeps biting your heels, consider putting on a thin strip of moleskin along the heel of your shoe instead.Thanks
- If the shoes are too painful to wear, give them to a friend or donate them. No shoe is worth the potential damage to your foot.Thanks
- You can only stretch a shoe so much. It is nearly impossible to stretch a shoe more than half a size.Thanks
- Leather stretches easier than synthetic materials. If you shoe is made out of vinyl, fake leather, canvas, and so forth, it may not stretch that much.Thanks
Advertisement
References
- ↑ http://www.onegoodthingbyjillee.com/2014/01/how-to-stretch-too-tight-shoes.html
- ↑ https://projectgirlagainsttheworld.wordpress.com/2012/04/11/breaking-in-leather-shoes-the-cheats-way/
- ↑ http://www.onegoodthingbyjillee.com/2014/01/how-to-stretch-too-tight-shoes.html
- ↑ http://www.goodhousekeeping.com/home/cleaning/tips/a2445/shoes-stretching-apr02/
About This Article
Thanks to all authors for creating a page that has been read 90,882 times.
Advertisement