Download Article
Download Article
You want to thread a needle! It isn't hard, once you've gotten the hang of it, but it does require careful technique and a good deal of dexterity. Once you've gotten your hands on a needle and thread, read on to learn how to thread the needle!
Steps
-
Cut your thread. The length, color, and type of thread will depend on what you're sewing. Make sure that it's long enough for your purposes! In general, a thread about 18-24 inches in length should be plenty to begin with. [1] X Research source -
Neaten the thread. Examine the tip that you plan to put through the needle, and make sure that it is sharp and tight. Moisten and squeeze the tip by putting it between your lips. Bring the strands to a sharp point that will fit through the eye of the needle. If the tip of the thread is uneven, trim it down with scissors.Advertisement
-
Match needle with thread. Compare the eye (the hole at the top) of the needle with the thickness of the thread. The thread should be able to easily fit through the eye. If the thread is too thick, try to find a thinner thread or a needle with a wider eye. [2] X Expert Source Mia Danilowicz
Master Tailor Expert Interview. 8 January 2021. If you're new to sewing, and the work isn't terribly intricate, try using a needle with a large eye for easier threading. [3] X Research source
Advertisement
-
Hold the thread in one hand and the needle in the other. At first, it's generally easiest to grip the needle between the thumb and forefinger of your non-dominant hand. Hold the thread comfortably between the thumb and forefinger of your dominant hand. Raise the needle and the thread up to your eye level, about two inches apart. Make sure that there's plenty of light to see everything clearly! [4] X Expert Source Mia Danilowicz
Master Tailor Expert Interview. 8 January 2021.- Consider pinching the thread between your fingers so that only the tiniest tip is visible. If you're having trouble, this technique might help you steady the thread. [5] X Research source
-
Guide the thread into the eye of the needle. Line the tip of the thread up with the eye-hole, and make sure that you have a clear view of the hole. Keep your hands steady. Push the thread slowly and surely through the eye-hole until you see it poke through the other side. [6] X Expert Source Mia Danilowicz
Master Tailor Expert Interview. 8 January 2021.- Try holding the needle sideways, so that you can't see the eye, but you can see the thread as soon as it peeks through the eye. [7] X Research source
- This may take a couple of attempts. Keep trying! If you're having trouble, try moistening and smoothing the tip of the thread again.
- If you keep trying, but you can't get it, consider using a needle with a bigger eye-hole. [8]
X
Expert Source
Mia Danilowicz
Master Tailor Expert Interview. 8 January 2021.
-
Pull the thread through. Use your fingertips to carefully tug more of the thread through the eye. Go for at least 10cm (four inches) so that there's little chance of the thread-tip slipping back through. Let this end hang through the needle eye, and shift your attention to the other end of the thread.
Advertisement
-
Pick up the far end of the thread. Let one end of the thread hang through the eye of the needle. Hold the other, longer end between the thumb and forefinger of your non-dominant hand. Make sure that you have a sturdy grip!
-
Wrap the long end around your forefinger. Loosely loop the end of the thread around your finger – enough that it is secure, but not so tightly that it cuts off circulation. Wrap the thread three times around for sturdiness.
-
Roll the thread into a loop. Use the thumb of the same hand to roll and slide the thread off the tip of your forefinger. The thread should form a tangled loop as you do this. Don't worry if it doesn't look neat – as long as there's a loop!
-
Tighten the thread. Grasp the loose loop between your thumb and forefinger. Now, pull it down toward the end of the thread until it tightens into a knot. This process is simple, but may take a little practice. Once you've knotted the end of the thread, you can be sure that it won't slip through the eye of the needle. Make sure that the knot is thicker than the eye is wide! [9] X Research source
Advertisement
Expert Q&A
Search
-
QuestionHow do you thread a needle with a small eye?Mia Danilowicz is a Master Tailor who works onset and on the red carpet in Los Angeles, California. With over a decade of experience, Mia specializes in bridal and gown couturier fittings, garment reconstruction, and custom design. Mia has worked at the Oscars, Grammys, SAG Awards, and Golden Globes. Her clients include a long list of entertainment and fashion industry headliners, major fashion magazines, luxury consumer brands, and popular media. Mia was trained at the Fashion Institute of Design and Merchandising and received her AA in Fashion Design and BS in Business Management.You can use a needle threader, which is a smaller metal device that has a wider wire-like opening. To use the needle threader, insert it into the eye of the needle, put the end of your piece of thread through, and gently pull it out of the eye of the needle leaving only your thread looped through.
-
QuestionWhat is a hand needle?MicheleTop AnswererIt’s a needle used for sewing by hand, as opposed to a needle used by a sewing machine.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Things You'll Need
- a needle
- thread (the same shade as your fabric, or one shade darker)
- scissors
Tips
- Consider using a needle threader . This device can make the process much easier. [10] X Research sourceThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ http://www.sew4home.com/tips-resources/sewing-tips-tricks/hand-sewing-thread-needle-tie-knot
- ↑ Mia Danilowicz. Master Tailor. Expert Interview. 8 January 2021.
- ↑ http://www.realsimple.com/beauty-fashion/clothing-care/how-hand-sew-0
- ↑ Mia Danilowicz. Master Tailor. Expert Interview. 8 January 2021.
- ↑ http://www.artofmanliness.com/2013/12/14/the-easiest-way-to-thread-a-needle/
- ↑ Mia Danilowicz. Master Tailor. Expert Interview. 8 January 2021.
- ↑ https://www.youtube.com/watch?v=5itDoZSqaak
- ↑ Mia Danilowicz. Master Tailor. Expert Interview. 8 January 2021.
- ↑ https://www.youtube.com/watch?v=QBzYqAZRP_A
About This Article
Article Summary
X
To thread a needle, start by cutting a piece of thread and moistening the tip so it's smooth and straight enough to fit through the needle. Then, hold the thread with one hand and the needle with the other, and guide the tip of the thread through the eye of the needle. Next, pull the thread through the needle, and bring the 2 ends of the thread together. Finally, tie the ends of the thread together to make a knot. To learn how to choose the right size needle and thread, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 93,159 times.
Advertisement
82%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Nice and simple, thanks!"
