How to Throw a Pot

PDF download Download Article
PDF download Download Article

Making a pot can be tricky but equally fun for those enthusiastic about pottery. A little care while holding the clay and working with it on a potter's wheel can bring satisfying results. Unleash the potter within you by using this well-established technique for throwing a pot on a circulating wheel head.

Steps

PDF download Download Article
  1. After obtaining the clay for your desired cone firing temperature, either high fire clay (porcelain, stoneware, etc.) or low-fire clay (raku, longhorn red, terracotta, etc.) you need to knead or wedge the clay to get out air bubbles. Gather a small amount of clay - the size of two fists put together is plenty for someone just starting - and form it into a rough ball shape. Then pick the ball up, and slam it against a large slab of plaster. Plaster is best to absorb extra moisture from too-wet clay, but any smooth and hard surface will work. Push the clay with your hands forward in the same manner of kneading bread. Mold it into a ball, and repeat the process. To see if there are still air bubbles, use a piece of wire to cut the ball in half. The air bubbles will look like little craters in the smooth clay. If air bubbles are left in the clay the clay will almost never be centered and impossible to raise. When there are no air bubbles present in the clay, shape it back into a rough ball.
  2. [1] The easiest way to do this is by throwing the clay with some force on the center. Spin the wheel fairly fast. With a bowl of water wet hands and clay. The object here is to cup the clay in the hands, squeeze it using legs for extra strength, and bring it up into a tower shape. If you're using a kick wheel, you can control how fast the clay will spin, but you'll need a lot of strength. An electric wheel takes less energy, but you have less control over the speed. Push the clay down and in on the wheel at the same time, letting extra clay and water slide away from your hands and off the wheel. The first thing you want to do is called centering the clay. The ball of clay should look even, and be rotating evenly, like the wheel of a car when viewed from the side. [2]
    Advertisement
  3. Then push your tower down with one hand and keep it stable with the other hand. This is done three or four times to help center the clay and to keep the clay aligned correctly. [3]
  4. There are different ways of doing this, and there are two methods described here. Use whichever one will work best. The beginning is the same for both methods. Make sure your body is centered over the wheel and legs are planted firmly on the ground. [4]
    1. Make sure that your arms are firmly in position and pressed into your thighs. Start by cupping the clay in both hands with your thumbs over the top. Make sure that your hands and the clay are always wet. Pull your wrists back slightly while pressing down and holding them rigid. Start compressing and smoothing the clay with your palms. Only do slight movements, a little pressure goes a long way.
    2. The second method for centering clay is by using one hand at the side of the clay and one hand on top. Both are pushing on the clay to smooth it out. Again, only use your palms and keep your arms locked against your body.
  5. Once the clay is centered, it is time to open it. To start you need to make a hole in the center. To do this, start by moving your finger across the top of the clay in a straight line. This is so you find the exact center. If the hole is not started in the exact middle, the clay will begin to wobble and you will have to follow the steps above to recenter it. Slowly push your forefinger straight down into the center of the spinning clay, about an inch from the bottom, using the other hand to cup the clay and act as a stabilizer at the same time. Slowly remove your finger from the hole. [5]
  6. To enlarge the hole, put your finger into the hole you've already created and slowly start bringing it towards your body. You will need to use your other hand to brace the wall that is being created. Enlarge this to the size of the base you wish your pottery to be. This created wall would generally be about an inch to two inches thick. With the wall created, the cylinder should spin perfectly symmetrical. In all these steps always remove hands and fingers and take the pressure off slowly. [6]
  7. [7] After you have created an opening the bottom will need to be compressed. To do this you can either use a wooden rib to take out all the off-center clay from the bottom or you can slowly smooth it out with your fingers. The former method will create a flat bottom. [8]
  8. [9] Usually the index finger of the first hand is braced against the inside wall toward the bottom, with the thumb braced across to the second hand or wrist. Because by now the clay is thoroughly soaked with water, a very small, say one inch sponge is held between index finger and thumb of the second hand The index finger and sponge are pressed against the outside wall exactly opposite the finger(s) on the inside. They are squeezed and raised together, thinning the wall and raising the pot. This is done a little at a time from say 6 to 12 times, until the desired thickness of the wall is achieved, from an eighth of an inch to an inch depending on the type of pot or plate. The object is usually to thin the wall to the point where it still has the strength to stand up. The sponge is used to control the wetness and strength of the clay, the more wet the weaker, the less the stronger.
  9. The top often becomes uneven and can be cut off at any time, but especially after the walls are finished. With a pin projecting from a wood cylinder bought at a ceramics shop, with the first hand press the pin into the spinning clay near the top, or cut off where desired. Press into spinning clay until it reaches the index finger of the second hand on the inside. When completely cut all the way around, simply lift up and off. This is a basic cylinder. For shaping and finishing see: How to Shape and Finish a Wheel Thrown Pot
    10. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    How do you center clay on a wheel?
    Deanna Ranlett
    Pottery & Ceramics Professional
    Deanna Ranlett is a Pottery and Ceramics Professional and the Owner of Mudfire Inc. in Decatur, Georgia. With more than 22 years of experience in the ceramics industry and eight years of experience owning a studio, they specialize in glaze formulation, firing ceramic and pottery pieces, general clay projects, and screen printing for ceramics. Deanna holds a BFA in Ceramic Arts and Ceramics from Georgia State University.
    Deanna Ranlett
    Pottery & Ceramics Professional
    Expert Answer
    Start by aligning your nose over the center of the wheel. This way, you'll be more centered when you go to center your clay.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    Why can't I center my clay?
    Deanna Ranlett
    Pottery & Ceramics Professional
    Deanna Ranlett is a Pottery and Ceramics Professional and the Owner of Mudfire Inc. in Decatur, Georgia. With more than 22 years of experience in the ceramics industry and eight years of experience owning a studio, they specialize in glaze formulation, firing ceramic and pottery pieces, general clay projects, and screen printing for ceramics. Deanna holds a BFA in Ceramic Arts and Ceramics from Georgia State University.
    Deanna Ranlett
    Pottery & Ceramics Professional
    Expert Answer
    You might not be using the right amount. Centering too much clay can be too overwhelming, while not centering enough can be difficult when you have average-size hands. One or 2 pounds of clay (0.45 to 0.9 kg) is a good amount to start with.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    How do you perfectly center clay?
    Deanna Ranlett
    Pottery & Ceramics Professional
    Deanna Ranlett is a Pottery and Ceramics Professional and the Owner of Mudfire Inc. in Decatur, Georgia. With more than 22 years of experience in the ceramics industry and eight years of experience owning a studio, they specialize in glaze formulation, firing ceramic and pottery pieces, general clay projects, and screen printing for ceramics. Deanna holds a BFA in Ceramic Arts and Ceramics from Georgia State University.
    Deanna Ranlett
    Pottery & Ceramics Professional
    Expert Answer
    Focus on anchoring your body in some way that's comfortable. You can start by anchoring your elbows into your side; if this doesn't work well, try leaning over a little further and anchoring your elbow into your thigh. This way, your arm can't move, and you're creating a stable push with your body.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Keep a good speed of spin especially when centering.
        Thanks
        Helpful 1 Not Helpful 0
      • The walls of the pot in the cylinder stage are thinned to a thickness that is suitable to the type of pot being made, usually thicker at the bottom to hold outward curves, or even up and down for cups. Keep excess water sponged out of the bottom.
        Thanks
        Helpful 0 Not Helpful 0
      • Save the wet clay that you trim while forming pottery, and the wet clay that collects in the wheel well. This can be set on a plaster slab to dry out a bit, and then reused.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Clay
      • Potter's wheel, either an electric or kick type
      • Wire to cut the completed pot off the wheel
      • Plastic, chamois, or wood tool to smooth the pot's rim
      • Water in a bucket or cup
      • Any tools desired for decorative purposes
      • A sharp needle tool or strong thin stick to trim the pot's rim

      You Might Also Like

      How to
      Make a Silicone Mold
      How to
      Bake Polymer Clay in a Conventional or Toaster Oven
      17 of the Most Valuable Pottery and Porcelain Marks
      How to
      Harden Modeling Clay
      How to
      Make a Clay Person
      How to
      Color Air Dry Clay
      How to
      Soften Polymer Clay
      How to
      Revive Dry Clay
      How to
      Make DIY Clay Dolls at Home
      How to
      Drill a Clay Pot
      How to
      Dry Non‐Hardening Modeling Clay
      How to
      Make a Clay Pot
      How to
      Make a Clay Volcano
      How to
      Bake Sculpey Polymer Clay Like a Pro: Expert Tips & Tricks
      Advertisement

      References

      1. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      2. ↑ https://www.youtube.com/watch?v=Q3P5QrJkzx0
      3. ↑ https://www.youtube.com/watch?v=sO7RWJrF8es
      4. ↑ https://www.youtube.com/watch?v=Q3P5QrJkzx0
      5. ↑ https://www.youtube.com/watch?v=sO7RWJrF8es
      6. ↑ https://www.youtube.com/watch?v=BHzPCqZI0pc
      7. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      8. ↑ https://www.youtube.com/watch?v=BHzPCqZI0pc
      9. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      1. http://www.goshen.edu/~marvinpb/throw/cover39.html

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 144,232 times.

      Reader Success Stories

      • Rick Voss

        Aug 11, 2017

        "Good detail. Process broken down into doable sections. Can't wait to try it!"
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement