How to Troubleshoot Low Water Pressure

PDF download Download Article
PDF download Download Article

Ready to take a hot shower, you turn the faucet handle only to find a sad stream of water trickle out. Or maybe you have a towering pile of dishes in your sink but barely any water to clean them with. Low water pressure is super frustrating! The good news is that most of the time you can pinpoint the cause and troubleshoot the issue yourself. This article will walk you through how to do it step-by-step.

Method 1
Method 1 of 4:

Checking Your Water Pressure

PDF download Download Article
  1. Check various locations that have faucets. [1]
    • The kitchen, the bathroom, basement and outdoor faucets, and hose hookups are common areas where fixture specific low water pressure can occur.
    • Run water in all faucets and showers in your home to identify if there is are one or multiple problem problem areas or to determine that all locations have low water pressure.
    • Run both hot and cold water through all faucets. [2] If your water pressure is low only with hot water, the issue is likely your water heater.
  2. Your problem might only affect one or two locations. In this case, the source of the low water pressure is likely a clogged faucet or aerator. [3] [4]
    • Remove the end of the faucet.
    • Examine your aerator. [5] Check to make sure there are no debris or buildup.
    • If the aerator needs to be cleaned, soak it in a water-vinegar solution. If that doesn't work, buy a replacement. These are very inexpensive. [6] Aerators are sold with different rates of water flow, so you can also try buying one with a higher rate of flow.
    • Turn the water on before you replace the aerator. If the water flow is not restored to normal, the source of low water pressure is likely not the specific faucet but an overall problem.
    Advertisement
  3. If you can't pinpoint the cause of your low water pressure to just one or two faucets in the house, its probably an overall problem. [7]
    • Check the PRV and water shut off valves in your home. This is often the cause of low water pressure.
    • Look for water leaks. A leaking toilet or water main can cause low water pressure.
    • Check your water heater. If you only have low water pressure when you are running hot water, it is likely due to your hot water shut-off valve on your water heater.
    4. Advertisement
Method 2
Method 2 of 4:

Checking PRV and Water Shut Off Valves

PDF download Download Article
  1. Shaped like a bell, the PRV is usually located on the line where it enters the home or office.
    • Adjust it to see if it affects your overall water pressure. There will be a screw on the valve. To increase water pressure, tighten it by turning it clockwise. To decrease water pressure, loosen the adjusting screw by turning it counterclockwise.
    • Replacement may be necessary if the valve has failed or broken. These can be purchased at hardware or plumbing supply stores.
  2. This valve can influence water pressure, even if it has been turned slightly. [8]
    • Most homes and buildings have a master shut-off valve. This is located near the PRV valve or in a separate box near the water meter.
    • This valve can shut off water to the entire home, and restrict flow if it is slightly closed.
    • Turn the valve so it is completely open.
  3. If the problem is resolved, the source was likely the PRV valve or water shut-off valve
    • If you are still experiencing water pressure issues, you may have a water leak. Water leaks are a common source of low water pressure in a house.
    • You should consult a plumber to fix a water leak or mineral buildup in your water lines.
    4. Advertisement
Method 3
Method 3 of 4:

Locating A Water Leak

PDF download Download Article
  1. Running or leaking toilets are one of the most common source of water leaks in a home. This can cause very high water bills, so it is a good idea to determine if this is the root cause of a water pressure problem.
    • Start by removing the lid from the tank of the toilet.
    • Put a few drops of food coloring or a dye tablet into the tank.
    • Do not flush the toilet for at least one hour.
    • If color has leaked into the bowl, your toilet has a leak. This can usually be fixed by replacing the toilet flapper or filling mechanism.
  2. This can help you determine if you have a service line leak.
    • Locate your service meter. Take a reading of the meter and check to see if the indicator gear is turning.
    • The leak indicator can be a small triangle shaped dial or disk that rotates when water is flowing.
    • If the leak indicator is turning, you likely have a leak. If it is not turning, it does not mean there isn't a leak. A slow leak may not register on the leak indicator.
    • Don't run any water for 2 hours and do another service meter reading. If the numbers have changed you are losing water and have a leak
    • Call your water company or a plumber to help you find the source of a leak and to arrange repairs.
  3. This can be a clear indication of a water leak. [9]
    • In many cases you can hear a dripping sound in the case of a leaking faucet. Usually this requires a simple home repair.
    • If there are large areas of water in the basement, there may be a water main leak.
    • You should also check the ground in the area outside your home where your main meets the local supply. If the weather has been dry and the area around this junction is wet, there could be a leak at this spot. Contact your water company to resolve this issue.
    4. Advertisement
Method 4
Method 4 of 4:

Troubleshooting Hot Water Low Pressure

PDF download Download Article
  1. In this case the water heater shut off valve is the most common source of this problem.
    • Verify the shut-off valve is completely open. For safety, each water heater includes a shut-off valve to use in case of emergencies.
    • If the valve is shut even slightly, this can affect your water pressure.
  2. The water pressure issue should be resolved when hot water is run through a faucet.
    • If the hot water low pressure problem is not resolved, it could be the water lines into the water heater or the appliance itself.
    • In this case, call a plumber to troubleshoot further.
  3. Blockages can occur within the lines, and plumbers have efficient ways of checking them. [10]
    • The appliance itself may also be causing a problem. A licensed plumber will need to evaluate it to see if it needs to be replaced.
    • Working with water heaters can be dangerous, so it is best to leave this job to a professional.
    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Why would only one faucet in a two-sink bathroom have low pressure?
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Dave Jones is a Professional Plumber and the Midwest Regional Vice President at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a drain service technician at the age of 18. Since then, he has risen through the ranks into positions of increasing authority. Dave served as general manager of Roto-Rooter’s Charlotte, North Carolina, and Atlanta, Georgia branches before being promoted to Contractor Area Manager and later to Regional Vice President. Dave holds Master Plumber Licenses in Pennsylvania, North Carolina, and Georgia.
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Expert Answer
    This is almost certainly the aerator. That's the little net cap on the faucet where the water comes out. Sometimes, debris builds up on that thing, which cause the water pressure to be artificially low.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 9
  • Question
    What causes low water pressure in the whole house?
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Dave Jones is a Professional Plumber and the Midwest Regional Vice President at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a drain service technician at the age of 18. Since then, he has risen through the ranks into positions of increasing authority. Dave served as general manager of Roto-Rooter’s Charlotte, North Carolina, and Atlanta, Georgia branches before being promoted to Contractor Area Manager and later to Regional Vice President. Dave holds Master Plumber Licenses in Pennsylvania, North Carolina, and Georgia.
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Expert Answer
    This is typically a problem with your water heater. The first thing you should do is check the shutoff valve on the water heater. Sometimes, people forget to open it up all the way, which can cause the pressure to be a little wonky.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 8
  • Question
    How do I increase the water pressure in my shower?
    James Schuelke
    Professional Plumber
    James Schuelke, along with his twin brother David, is the co-owner of the Twin Home Experts, a licensed plumbing, leak detection, and mold inspection company based in Los Angeles, California. James has over 32 years of home service and business plumbing experience and has expanded the Twin Home Experts to Phoenix, Arizona and the Pacific Northwest.
    James Schuelke
    Professional Plumber
    Expert Answer
    If the hot and cold are both coming out slow, then that means it's most likely the shower head that is causing the low water pressure. Remove the shower head and dislodge any debris that's caught up in the screen. If you have plenty of cold pressure and low hot pressure, then that is most likely the result of the valve itself. In that case, you will need to dislodge the debris that's caught up inside the actual handle where you demand the water.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 10
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Call your neighbors to see if they are experiencing water pressure issues, too. If they are, there may be a leak in the lines. Call the water department to report the issue.
        Thanks
        Helpful 39 Not Helpful 51
      • Ask a plumber to check the water lines within your home or building. Older water lines sometimes become clogged or filled with mineral deposits. When this happens, replacement of your lines with copper or PVC piping to restore water pressure is necessary.
        Thanks
        Helpful 37 Not Helpful 64
      • Pay attention to when your water pressure fluctuates. Water pressure can decrease during times when more people on your line use water. Mornings and early evenings often account for peak usage times.
        Thanks
        Helpful 23 Not Helpful 52
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Adjust a Pressure Switch
      8 Easy Ways to Repair a Leaky Pipe
      How to
      Turn Your Water Back On After It’s Been Shut Off
      How to
      Detect Water Leaks in Walls
      How to
      Boil Water (& How Long It Takes)
      How to
      Chug Water Safely: Tips and Tricks
      How to
      Calculate and Measure Water Pump Horsepower
      How to
      Raise the pH of Water
      How to
      Check Your Water Quality with or without a Kit
      How to
      Increase Water Pressure
      How to
      Prime a Water Pump
      How to
      Increase Well Water Pressure
      How to
      Fix Hard Water
      How to
      Use a Stovetop or Electric Tea Kettle to Boil Water
      Advertisement

      References

      1. ↑ Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 29 March 2021.
      2. ↑ James Schuelke. Professional Plumber. Expert Interview. 1 October 2019.
      3. ↑ http://www.bobvila.com/articles/low-water-pressure/#.VH5SJN5bzww
      4. ↑ Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 29 March 2021.
      5. ↑ James Schuelke. Professional Plumber. Expert Interview. 1 October 2019.
      6. ↑ http://www.bobvila.com/articles/low-water-pressure/#.VH5SJN5bzww
      7. ↑ James Schuelke. Professional Plumber. Expert Interview. 1 October 2019.
      8. ↑ James Schuelke. Professional Plumber. Expert Interview. 1 October 2019.
      9. ↑ http://www.bobvila.com/articles/low-water-pressure/#.VH5SJN5bzww
      1. ↑ http://www.bobvila.com/articles/low-water-pressure/#.VH5SJN5bzww

      About This Article

      Article Summary X

      To troubleshoot low water pressure, start by running all of the faucets and showers in your home to determine whether the problem is with one single faucet or with all of them. If it's just one or two faucets that aren't working, try cleaning or replacing the aerator on the end of the faucet. If it's all of your faucets, make sure the pressure-reducing valve and the water shut-off valve in your home aren't broken or slightly turned. To learn how to troubleshoot low hot water pressure, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 2,024,951 times.

      Reader Success Stories

      • Anonymous

        Dec 24, 2016

        "The reason my kitchen faucet water pressure was low was because of the aerator was clogged, as suggested in the ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement