Rit Dye Instructions for Dyeing Your Clothes

PDF download Download Article
How to use Rit Dye in a sink, bucket, on the stovetop, or in the washing machine
PDF download Download Article

Rit Dye is an all-purpose dye that can be used to color most natural fabrics, along with other materials like paper, wood, rope, and even nylon-based plastics. There are several dyeing methods to choose from, based on how vibrant you want your colors to be, and how much work you want to put into the process! Keep reading to learn everything you need to know about using Rit dye.

Things You Should Know

  • Check the material you want to dye and weigh it to determine which dye to get and how much to use.
  • For an easy method, fill a bucket with enough hot water that the fabric can move freely and is completely covered. Use 3 gallons (11 L) for each 1 pound (0.45 kg) of fabric.
  • Pour the dye into the water, put the fabric into the water, and stir continuously for 10-60 minutes. Take the fabric out, rinse it with cool water, and wash it with mild detergent.
Section 1 of 5:

Prep & Dye Selection

PDF download Download Article
  1. Rit makes two kinds of dyes, one for natural fabrics and one for synthetic materials. If you’re dyeing cotton, linen, rayon, wool, silk, lamé, or nylon, get Rit All-Purpose Dye . If your fabric is more than 35% polyester, acrylic, or acetate, get Rit Synthetic Dye . [1]
    • For the best results, use white or off-white fabric. If you want to use a colored fabric, either remove the color using a product like Rit color remover , or choose a dye that mixes well with the color (for example, if you want to dye a yellow shirt orange, choose a red dye).
    • Even if you remove the color, the patterns and logos will often stay in the fabric.
  2. Before washing your fabric, weigh it on a kitchen scale. For every 2 pounds (0.91 kg) of fabric, use 1 bottle of liquid dye or 2 packets of powdered dye. Double the amount of dye if you want a darker color. Wash your fabric with a mild detergent, and remove any stains. [2]
    • Don’t use fabric softener while prewashing fabrics.
    • Never dye dirty clothing, or the color can come out splotchy.
    Advertisement
  3. Lay out a few sheets of newspaper or some old towels on the floors, countertops, and surfaces in your dyeing area. Rit dyes stain most materials, so by taking a few extra moments to prepare, you can spare yourself an extensive cleanup process.
    • Wear gloves while handling dye to avoid staining your hands and to protect them from hot water.
    4. Advertisement
Section 2 of 5:

Using a Sink or Bucket for Dyeing

PDF download Download Article
  1. Get a container that can hold several gallons of water, plus whatever you’re dyeing. [3] A plastic bucket or dish pan that holds around 5 gallons (19 L) is often large enough for your fabric to move freely. You can also do your dyeing in a sink, provided that it’s stainless steel.
    • Don’t use Rit Dye in white porcelain or fiberglass sinks, as it can leave permanent stains.
  2. For effective dyeing, use water around 140 °F (60 °C) (hot enough to release steam). [4] The intense heat softens the fibers of the fabric and helps them accept the dye. If your tap doesn’t get hot enough, heat the water on the stove. Use 3 gallons (11 L) for each 1 pound (0.45 kg) of fabric.
  3. Pour 1 bottle of liquid dye per 2 pounds (0.91 kg) of fabric. For powdered Rit Dye, mix 2 packages into 2 cups (470 mL) of hot water, then incorporate the mixture slowly until you achieve the desired depth of color. Stir the dye until it’s completely distributed. [5]
    • Shake liquid dye before adding it to the water.
    • Stir with a stainless steel spoon or similar utensil.
    • If you’re dyeing a single t-shirt or a couple of pairs of underwear, you can use less dye, whereas you’ll likely need more for a heavy sweater or multiple pairs of jeans.
  4. If the item you’re dyeing is cotton, dissolve 1 cup (300g) of salt into 2 cups (470 mL) of hot water and add it to the dye bath. For wools, silks, or nylons, use 1 cup (240 mL) of distilled white vinegar instead. [6] Stir the dye bath once again to disperse the additives.
    • Some fabrics tend to resist dyes. The salt or vinegar will serve to condition the fabric and promote consistent coloration.
    • Adding 1 teaspoon (4.9 mL) of dish soap also helps to evenly distribute the dye.
  5. Dip the corner of the paper towel into the solution and note the color. [7] If it’s too light, add more dye. If it’s too dark, add more water.
    • Repeat your color test on another part of the paper towel as many times as necessary until you get the color just right.
  6. Wetting your fabric beforehand helps the dye penetrate the fibers more easily. Wring out your fabric and slowly lower it into the bath. Make sure the entire piece sits below the surface of the dye. [8]
    • Keep the fabric as unfurled as possible when you put it into the dye to prevent lines from forming in the color.
  7. Stir the water with a spoon or drag the garment around with a pair of tongs. Keep the garment moving constantly so that every part of the fabric is exposed to the solution. The longer you leave it in the dye bath, the more intense the final color will be. [9]
    • Stir diligently for the first 10 minutes, since they are the most important for allowing the dye to absorb.
    • Nylon dyes very quickly, so take it out after 10 minutes.
    • Cotton polyester blends take at least 30 minutes to fully dye.
    • If you use tongs, switch up where you hold the fabric to allow every part to touch the dye.
    • Colors appear darker when the garment is wet.
  8. When you're satisfied with the look of the item, take hold of one corner with your tongs and lift it out of the dye bath. Wring out as much dye as you can by hand, then rinse it with cool water. [10]
    • To avoid leaving a colorful trail of drips all over your home, set up your dyeing station close to the area where you'll be doing your rinsing.
  9. Use Rit ColorStay Dye Fixative or use a DIY dye setting technique to lock in the dye, then wash the fabric on low heat with a mild detergent. [11] Dry the item on a high setting to further lock in the color.
    • Some materials may fade a little following a few washings, so consider using color-preserving detergents and fabric softeners to maintain the appearance of your dyed clothing.
    • Wash the fabric with like colors and old towels to prevent bleeding.
    • Hand wash and dry delicates, like wool, silk, and lace in a sink full of clean, warm water. Press out the excess water gently, then hang each garment separately and allow them to air dry.
    10. Advertisement
Section 3 of 5:

Using the Stovetop Method to Dye Synthetic Fabrics

PDF download Download Article
  1. Choose a stainless steel pot that’s large enough to hold at least 3 gallons (11 L) for each 1 pound (0.45 kg) of fabric you’re dying. Turn on your stove and get the water to 200 °F (93 °C), or to where it’s just simmering. [12]
    • The stovetop method is great for getting more vibrant colors with natural fabrics, however, it is the only method you can use for synthetic fabrics.
    • If you’re dyeing natural fabrics, you can have the temperature as low as 140 °F (60 °C).
    • Wear rubber gloves to protect your hands from the heat.
  2. Add 1 teaspoon (4.9 mL) to the water to help the dye spread evenly. [13] If you’re dying cotton, rayon, ramie, or linen, add one cup (300 g) of salt to the water. If you’re dying nylon, silk, or wool, add 1 cup (240 mL) of vinegar to the mix.
  3. Add 1 well-shaken bottle of liquid dye or 2 packets of powder for every 2 pounds (0.91 kg) of fabric you’re dyeing. [14] Stir until the dye is completely dissolved.
    • Add more dye for darker colors.
  4. Wet and wring out the fabrics you want to dye, then add them to the bath. Stir the fabric so all parts evenly come in contact with the dye. The first 10 minutes are crucial for letting the dye absorb into the fabric, so stir diligently! [15]
    • Keep the water at a low simmer the entire time.
    • Keep polyester cotton blends in the bath for at least 30 minutes, and take nylon out after 10 minutes.
  5. Once your fabric has reached your desired color (wet fabrics will look darker), take it out of the pot and wring out the excess water. Rinse it in warm water and slowly switch to cool. Stop once the water runs clear. [16]
  6. If you dyed fabric with cotton, linen, ramie, or rayon, use Rit ColorStay Dye Fixative , or use a DIY method to set the color. Wash the fabric with like colors and a mild detergent on a low heat setting, then dry it on hot. [17]
    7. Advertisement
Section 4 of 5:

Using a Front-Load Washing Machine to Dye Fabric

PDF download Download Article
  1. Wet your fabrics and put them into the barrel, then turn your washer to its hottest setting. Set the wash cycle to be at least 30 minutes (before the rinse cycle). [18]
    • Only dye a few, lightweight items at a time in front load washers. For large batch dyeing and bulky items, use the stovetop or bucket method.
  2. Mix enough powder or liquid dye for the amount of fabric you’re dyeing with 4 cups (0.95 L) of very hot water. In a separate container, mix 1 cup (300g) of salt or 1 cup (240 mL) of vinegar with 4 cups (0.95 L) of hot water. Mix 1 teaspoon (4.9 mL) dish soap in with the salt or vinegar. [19]
    • Use salt for cotton, linen, rayon, or ramie, and vinegar for silk or nylon.
    • Wear rubber gloves to protect your hands.
  3. Once the cycle has started, take out the dish detergent tray and pour in the dye. Next, pour in the vinegar or salt, then flush the tray with 4 cups (0.95 L) of hot water. [20]
  4. Once the cycle is done, use Rit ColorStay Dye Fixative or try a DIY method to extend the life of the color, or immediately wash the fabric again in warm water with a mild detergent. Dry the items on the hottest setting the fiber type can handle. [21]
  5. Wipe down the inside of the lid and all of the plastic parts of your machine. Pour a small amount of bleach into the internal dispenser (if you have one), then put a few old towels and 2 cups (470 mL) of bleach into the barrel and run a cycle on the largest load and hottest water setting. [22]
    6. Advertisement
Section 5 of 5:

Using a Top-Loading Washing Machine to Dye Fabric

PDF download Download Article
  1. Pour 1 container of liquid dye into 4 cups (0.95 L) of hot water, or 2 packets of powdered dye in 2 cups (470 mL) of hot water. [23] If you’re dyeing cotton, linen, rayon, or ramie, mix 1 cup (300g) of salt with 4 cups (0.95 L) of hot water, or use 1 cup (240 mL) of vinegar if you’re dyeing silk or nylon.
    • Use the correct amount of dye for the weight of your items.
    • Wear rubber gloves for the entire dyeing process.
  2. Pour all the liquids, as well as 1 teaspoon (4.9 mL) of dish soap into the barrel. Wet the items you’re dyeing and add them in, too. [24]
  3. Make sure the wash cycle lasts at least 30 minutes before the rinse cycle starts. You may have to stop and restart the cycle if your washer doesn’t have an extended setting. [25]
    • If you’re washing bulky items (drapes, sheets, slipcovers) periodically stop the wash to untangle everything.
  4. Use Rit ColorStay Dye Fixative or try a DIY method to lock in the color, or immediately rewash the fabric in warm water with a mild detergent. [26] Dry the items afterward.
  5. Wipe the inside of the lid and pour bleach into the internal dispenser, if you have one. Fill the washing machine as high as it can with hot water, then add detergent and 2 cups (470 mL) of bleach and wash 3 old towels in it. [27]
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    With the purple dye, how can I make it darker? I am trying to make an eggplant purple.
    Community Answer
    If you are using Rit dye, use 3 parts purple and 1 part black. Mix with water as directed on the back of the box.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 20
  • Question
    How much Rit Dye do I use for 5 gallons of water?
    Community Answer
    You will need 2 bottles. One bottle is used for each three gallons of water. Use two to be safe. Also, measure the weight of the clothing you plan to dye. More clothing may need more dye. Heavier clothing, such as jeans, may need more dye. Plan with these factors in mind.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 15
  • Question
    Is it possible to dye orange fabric to red?
    Community Answer
    I would imagine so, just make sure you leave it in the dye for a long time. The only color you're trying to remove is the yellow that is already mixed with red to make orange, and since red is a more dominant color, enough dye and time should turn it all a solid red.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 7
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Wash dyed garments with like colors only.
        Thanks
        Helpful 3 Not Helpful 0
      • To dye items black, double the time in the dye bath and use a color fixer. If the item isn’t white, pre-dye it with a color on the opposite side of the color wheel. For example, dye a red shirt green before dyeing it black.
        Thanks
        Helpful 0 Not Helpful 0
      • Thoroughly clean your dyeing container and other tools when you’re finished, using bleach if needed to remove stubborn dye residue.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Do your best to avoid spills and splashes. If you accidentally get the dye somewhere it’s not supposed to be, it can be a pain to get the stains out.
        Thanks
        Helpful 4 Not Helpful 0
      • Dyeing multicolored items can be tricky since it’s not always possible to tell how each color will react.
        Thanks
        Helpful 1 Not Helpful 0
      • Read the ingredients listed on the label of the bottle carefully if you have reason to suspect you may be allergic to Rit Dye.
        Thanks
        Helpful 1 Not Helpful 1
      Advertisement

      Things You'll Need

      Bucket or Sink Method

      • Large stain-resistant container
      • Salt (for cotton, ramie, rayon, or linen garments)
      • Distilled white vinegar (for wools, silks, or nylons)
      • Dish soap
      • Metal spoon or tongs
      • Paper towel (for color testing)

      Stovetop Method

      • Large metal pot
      • Tongs or metal spoon
      • Salt (for cotton, ramie, rayon, or linen garments)
      • Distilled white vinegar (for wools, silks, or nylons)
      • Dish soap
      • Paper towel (for color testing)

      Washing Machine Methods

      • Salt (for cotton, ramie, rayon, or linen garments)
      • Distilled white vinegar (for wools, silks, or nylons)
      • Dish soap
      • Bleach

      You Might Also Like

      How to
      Set Dyed Fabric
      How to
      Dye Fabric Black
      How to
      Bleach Jeans
      Dyeing Clothes White with Bleach or Color Remover
      How to
      Dye Clothes with Food Coloring
      Dyeing Fabric with Tea: An Inexpensive & Eco-Friendly DIY Project
      How to
      Fade Clothes with Bleach
      Step-by-Step Instructions for Dyeing Jeans Black
      How to
      Dye Polyester
      How to
      Dye Faux Fur
      How to
      Dye Nylon
      How to
      Make a Bleach T Shirt
      How to
      Dye Denim: A Step-by-Step Tutorial
      How to
      Bleach White Clothes
      Advertisement

      References

      1. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      2. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      3. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      4. ↑ https://www.ritdye.com/techniques/tie-dye/immersion-technique/
      5. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      6. ↑ https://www.ritdye.com/techniques/tie-dye/immersion-technique/
      7. ↑ ​​ https://www.ritdye.com/faq/how-can-i-test-the-color-of-the-dye/
      8. ↑ http://www.rookiemag.com/2012/04/rit-dye-tutorial/
      9. ↑ https://www.ritdye.com/techniques/tie-dye/immersion-technique/
      1. ↑ https://www.ritdye.com/techniques/tie-dye/immersion-technique/
      2. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      3. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      4. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      5. ↑ https://www.ritdye.com/techniques/tie-dye/immersion-technique/
      6. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      7. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      8. ↑ https://www.ritdye.com/instructions/how-to-use-dyemore-for-synthetic-fibers/
      9. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/
      10. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/
      11. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/
      12. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/
      13. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/
      14. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/
      15. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/
      16. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/
      17. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/
      18. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-washing-machine/

      About This Article

      Article Summary X

      Before you use Rit Dye on a garment, make sure to wash and dry the item since dirt and oils may prevent the dye from setting. Then, stir half a bottle of liquid dye into 3 gallons of hot water, and add 1 cup of salt for cotton items, or 1 cup of white vinegar for wools, silks, or nylons to ensure even coloration. Next, place the garment in the dye and use metal tongs to swish it for 30 minutes before removing. Afterwards, rinse the item with warm water, then wash it with a mild detergent and run it through the dryer to lock in the color. To learn how to wash delicate dyed fabrics that won’t’ hold up in the washing machine, read on.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 277,819 times.

      Reader Success Stories

      • Caroline Paget

        May 1, 2018

        "Thanks to wikiHow I'm ready to dye some curtains, knowing I'll be doing it correctly. I often use Google ..." more
        Rated this article:
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement