How to Use Your Own Router With Verizon FiOS

PDF download Download Article
An easy-to-follow guide on using your own router with Verizon FiOS
PDF download Download Article

To use your own router with Verizon Fios, ask Verizon to activate the ethernet port on the ONT. Once activated, you can run an ethernet cable from your router's WAN/internet port to the ethernet port on the ONT. If you have TV service, you'll also need a MoCA adapter. Read on to learn how!

Quick Steps

  1. Contact Verizon to ask them to activate the ethernet port on the ONT.
  2. Buy a MoCA adapter if you have FIOS TV service.
  3. Log in to your Verizon router and release the DHCP lease.
  4. Disconnect the FIOS router and connect your router to the ONT via ethernet.
  5. Connect the MoCA adapter to resume TV service.
Part 1
Part 1 of 2:

Preparing the Network

PDF download Download Article
  1. If your Verizon router has an Ethernet cable connected to its WAN/internet port and the port's light is on, you're all set. This is the typical setup. If the router is connected to the ONT with a coaxial (cable TV) cable but not via Ethernet (true of older setups), you'll have to perform some additional steps. [1]
  2. If you're already connected via Ethernet, you can skip to the next step. If not, perform the following steps to switch to Ethernet:
    • Find the ONT in your home. It's usually in a white or silver box with the Verizon logo, and it's typically installed out of the way of foot traffic. It could even be mounted on the outside of the house near your telephone box.
    • Find the Ethernet port. It's usually near some green LED lights on the bottom of the unit. You may have to unscrew or unhinge the cover to get there.
    • Run an Ethernet cable from the Verizon FIOS router's WAN/Internet port to the Ethernet port on the ONT. Leave the coaxial cable intact for now, as the Ethernet port is not actually active yet.
    • Call Verizon FIOS support (800-837-4966) to have the Ethernet port on the ONT activated. Until support makes the switch, continue using the coaxial connection. [2]
    Advertisement
  3. If you have TV service through Verizon FIOS, switching to a new router will prevent internet-specific TV features (such as the guide, On Demand, and the DVR) from working. A MoCA adapter should make your TV service work almost exactly as it did before. Some popular manufacturers are Actiontec and TRENDnet. [3]
    • You may lose the ability to program your DVR remotely when using your own router. You should still be able to use regular DVR functions in your home.
    4. Advertisement
Part 2
Part 2 of 2:

Connecting the New Router

PDF download Download Article
  1. If you had to call Verizon to switch to Ethernet, make sure you are able to access the internet once coaxial service is deactivated. [4]
  2. 2
    Open a web browser and navigate to https://192.168.1.1. This is the default gateway address on your Verizon router.
  3. The username is admin and the password should be printed on the router's sticker. If you changed the router password, use the one you selected instead.
  4. It's near the top-left corner.
  5. It's in the menu on the left side.
  8. This will disconnect the router from the internet.
  9. You should unplug both the power and Ethernet cable from the back of the Verizon router a few seconds after clicking Apply for best results.
  10. It's the same end of the Ethernet cable that was formerly plugged into the Verizon router.
  11. After a few minutes, it should receive a Verizon FIOS IP address from the ONT and connect to the internet.
  12. The instructions to do this will vary by router. If the router supports Wi-Fi, you can connect that way. If you prefer to connect via Ethernet, run an Ethernet cable from your computer's network port to one of the LAN ports on the router.
    • The router's wireless access point name usually has something to do with its make or model. Check the manual for login instructions.
    • If the new router was specially configured for another network, you may need to do a full reset of the router. Specific instructions can be found in the router's manual, but it's usually as simple as pressing the end of a straightened paperclip into the small hole labeled "Reset" on the back of the router.
  13. Follow these steps to get your TV set-top box back online:
    • Connect the coaxial cable that once ran to your Verizon router to the coax-in port on the MoCA adapter.
    • Plug an Ethernet cable into the port on the MoCA adapter.
    • Plug the other end of the Ethernet cable into one of the available LAN ports on your router.
    • Unplug the TV set-top box for a few seconds and then plug it back in.
    14. Advertisement

Common Questions

Does a Fios router need an ethernet cable?

You can use a coaxial cable, ethernet cable, or Wi-Fi with your Fios router. [5]

Does Fios Gigabit require ethernet?

While you can use Wi-Fi, you'll get the best speeds when connected via a wired gigabit ethernet connection. [6]

Can I buy my own modem for Fios?

You must use the Verizon modem, but you can buy your own router if you prefer not to use the one provided by the service.

Video

Tips

Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Submit
Thanks for submitting a tip for review!

Warnings

  • Verizon does not officially support the use of third-party routers. If there is trouble on your network, you may be asked to restore the previous setup to correct the problem.
    Thanks
    Helpful 1 Not Helpful 0
Advertisement

You Might Also Like

Access Your Router: Easy Steps to Log In & Change Settings
How to
Connect Two Routers
10 Ways to Fix the Red Light on Your Spectrum Router
How to
Find a Router Password: Admin & Wi-Fi Passwords
How to
Forward a Port on Any Router: Easy Guide
4 Simple Ways to Configure Your Home Router
How to
Connect One Router to Another to Expand a Network
Cox Modem or Router Blinking Orange: Why It Happens + Troubleshooting
How to
Update Your Router's Firmware
How to
Clear the Router History
Simple Guide on How to Connect 2 Internet Routers for Wi-Fi Boost
How to
Change a TP Link Wireless Password
Why Is My Spectrum Router Blinking Blue? Troubleshooting Guide
How to
Change a Router Password
Advertisement

Expert Interview

Thanks for reading our article! If you’d like to learn more about dealing with routers, check out our in-depth interview with Steven Racz .

References

  1. ↑ https://forums.verizon.com/t5/Fios-Internet/Using-your-own-router-with-Verizon-FiOS/td-p/851632
  2. ↑ https://www.groundedreason.com/use-router-fios-internet/
  3. ↑ https://www.newegg.com/
  4. ↑ https://www.groundedreason.com/use-router-fios-internet/
  5. ↑ https://www.verizon.com/supportresources/content/dam/verizon/support/consumer/documents/internet/fios-router-user-guide.pdf
  6. ↑ https://www.verizon.com/support/residential/internet/getting-started/fios-gigabit

About This Article

Article Summary X

1. Switch to Ethernet if you're using coaxial.
2. Buy a MoCA adapter if you have FIOS TV service.
3. Log into the Verizon router through the admin site.
4. Clear the DHCP lease.
5. Turn off and unplug the router.
6. Connect the new router and power it on.
7. Connect the MoCA to the coaxial cable and new router.
8. Connect your computer to the internet.

Did this summary help you?
In other languages
Thanks to all authors for creating a page that has been read 523,106 times.

Reader Success Stories

  • Anonymous

    Jul 14, 2016

    "This article was very simple, but also extremely helpful. I tried various methods, but none worked until I found ..." more
Share your story

Is this article up to date?

Advertisement