Download Article
A complete guide to making your carpets look brand new again
Download Article
Using a carpet cleaner makes removing carpet grime quick and easy, and a Bissell carpet cleaner is one of the best options out there. If you want to learn how to use your carpet cleaner to get rid of dirt, stains, and debris in your carpets, you’ve come to the right place! We’ll go over the cleaning process step-by-step, so that you can get your carpets looking absolutely pristine. We’ve also consulted carpet cleaning specialist, Andrew Rohr, for some expert tips. Keep reading for everything you need to know!
Using a Bissell Carpet Cleaner
First, vacuum the area to lift up excess dirt and dust, and pre-treat stains with carpet shampoo. Fill the water tank of the cleaner with hot water and carpet cleaning formula, then plug it in and turn it on. To clean, press the trigger on the handle while moving the cleaner forward and backward over the carpet.
Steps
-
Clear the area of any furniture. Move any furniture off the carpet and out of the room, if possible. Give yourself plenty of room to maneuver and reach stains in tight spaces.- Work around furniture you can’t move, and make sure to move the carpet cleaner around carefully to avoid leaving marks or scratches on the furniture.
-
Vacuum the carpet thoroughly to remove dirt. Rohr recommends going over the carpet with your regular vacuum to remove as much dirt, dust, and debris as possible first. “Before any carpet cleaning takes place, the first step is to use a traditional vacuum with a beater bar to remove the dry soil from the carpet,” he says. “I would also use a carpet rake to remove additional pet hair, if present.” [1] X Expert Source Andrew Rohr
Carpet Cleaning Specialist Expert Interview. 15 April 2021. This prevents the dirt from being worked further into the carpeting later. [2] X Research sourceAdvertisement -
Treat heavily stained areas with a carpet shampoo (optional). Target areas that handle a lot of foot traffic, as well as any deep stains you find. A carpet cleaner alone sometimes isn't enough to clean these areas, so pre-treating with carpet shampoo can help you achieve a spotless carpet. Spray the shampoo onto the carpet directly, or blot it on with a wet paper towel, then let it soak in for about 3 minutes before operating the carpet cleaner. [3] X Research source- You can find bottles of carpet shampoo at any general store.
- Some carpet shampoos require different application methods, so make sure to read the instructions on the back of the bottle.
Advertisement
-
Fill the water tank with hot water. Detach the tank on the carpet cleaner’s front end. Run your sink until the water is hot, then place the tank’s spout under the faucet. The tank should have a line, about ¾ of the way up, indicating how far to fill it up. [4] X Research source- For help locating and removing the cleaner’s tanks, consult your owner’s manual. Usually, all you’ll have to do is lift up some plastic clips to free the tank.
-
Add carpet cleaning formula to the water tank. Check the instruction manual to make sure you pick a carpet cleaning formula that is specially designed to work with your machine. The tank should have a second fill line above the first one; pour the formula directly into the hot water until it reaches that line. [5] X Research source- Some cleaners have separate hot water and formula tanks. For these, fill the hot water tank full with water, then fill the formula tank to the fill lines with hot water and formula.
- You might be tempted to pour in extra cleaning formula to tackle a particularly dirty carpet, but Rohr cautions against this, as it ends up hindering the cleaning process. Instead, always use the recommended amount. [6]
X
Expert Source
Andrew Rohr
Carpet Cleaning Specialist Expert Interview. 15 April 2021. - Keep in mind that these carpet cleaning formulas are designed to work with the carpet cleaning machine, so they’re different from the carpet shampoo you may have used to pretreat stains.
-
Set the cleaning dial if your cleaner has one. Find the dial located on the front side of the cleaner, next to the tank. The dial will have settings for light, normal, and heavy cleanings. Depending on how dirty your carpeting is, select the correct setting and adjust it as you go. [7] X Research source -
Turn the tools dial to the floor cleaning option. The tools dial is the large one on top of the water tank. Spin the dial until the marked arrow on it points down, towards the floor cleaning option. Your machine is now loaded and ready to go. [8] X Research source
Advertisement
-
Flip on the power and heater buttons. Plug the power cord into a nearby outlet, then locate the buttons on the cleaner's back. Press both buttons down to turn the machine on and activate its heating system. -
Pull the handle’s trigger while moving the cleaner forward and back. Pull the trigger to spray water onto the carpet. While holding the trigger, push the cleaner forward, then pull it back. Focus on cleaning small areas at a time by moving the cleaner forward as far as you can reach without walking. [9] X Research source- Try not to overwet areas while you clean. “If you leave the carpet and pad soaked, it can take days to dry,” cautions Rohr. [10]
X
Expert Source
Andrew Rohr
Carpet Cleaning Specialist Expert Interview. 15 April 2021.
- Try not to overwet areas while you clean. “If you leave the carpet and pad soaked, it can take days to dry,” cautions Rohr. [10]
X
Expert Source
Andrew Rohr
-
Let go of the trigger to make a dry pass over the same area. Go back over the same area, this time without pulling the trigger. Move the cleaner forward again, then pull it back to suction up the dirt and water. Continue doing this until no more water can be pulled up from the carpet. You can see this by watching the tank, since no more water will flow into it. [11] X Research source -
Continue cleaning until the water tank is full. Move on to other areas, alternating between wet and dry passes to remove dirt. You may need to run the cleaner over heavily soiled areas a second time to get them truly clean and pristine. -
Empty the water tank when it fills with dirty water. As you use the cleaner, it sucks dirt and water into a second tank next to the water tank you filled earlier. This second tank will also have a fill line showing its maximum capacity. Once the soiled water reaches this line, pour it out into the sink. [12] X Research source \- The dirty water tank is attached to the clean water tank as one unit, so you’ll need to remove the whole thing to empty it. Undo the plastic clips like you did earlier to detach the unit.
-
Refill the clean water tank to continue cleaning. Run the hot water again. Using the guidelines, replenish the tank with water and formula. Your cleaner will be ready for action again. Depending on the size of your carpets, you will need to dump out the dirty water and refill the tank several times before you’re finished using the machine. -
Attach a tool to the end of the hose to clean hard to reach areas. Some carpet cleaners come with a hose and extra tools, such as a vacuum attachment. Slide the tool into the free end of the hose to tackle areas such as tight corners or stairs. [13] X Trustworthy Source Consumer Reports Nonprofit organization dedicated to consumer advocacy and product testing Go to source- Make sure to set the tools dial before using the tools. This is the same dial you set to the floor cleaning option earlier.
- Spin the dial to point up towards you. This is the tools option, which switches the power settings from the floor cleaner to the hose. Use these tools to finish up the last of your carpet cleaning. [14] X Research source
- You don’t have to do this part last, but it’s usually easier to target the larger areas first and come back for the difficult spots.
-
Rinse your carpets (optional). After you’ve gone over your entire carpet with your carpet cleaner, fill the water tank with hot tap water only and no cleaning formula. Go back over the carpet with your carpet cleaning machine one more time to make sure there’s no more carpet cleaning formula leftover. [15] X Research source -
Let your carpets dry completely. Drying times will vary from a couple of hours to a full day, depending on the thickness of the carpet. If you’re in a hurry, Rohr recommends using a wet/dry vacuum, or opening up the windows in your house. He also suggests setting up three simple box fans around the area in a triangle, which creates a sort of “vortex” and speeds up the drying process. [16] X Expert Source Andrew Rohr
Carpet Cleaning Specialist Expert Interview. 15 April 2021.
Advertisement
Expert Q&A
Search
-
QuestionCan I use vinegar in my carpet cleaner?Andrew Rohr is a Carpet Cleaning Specialist and the President of MSS Cleaning out of Denver, Colorado. With over five years of cleaning experience, he specializes in carpet cleaning, stretching, and repairs as well as upholstery cleaning, water damage restoration, and tile and grout cleaning. Andrew holds a BA in Psychology and Business Administration from The University of New Hampshire and an MBA in Corporate Finance from The University of Denver.No, don't bother using homemade vinegar and baking soda-type solutions with your equipment. Instead, just use the recommended cleaning product.
-
QuestionHow can I get rid of pet urine in my carpet?Andrew Rohr is a Carpet Cleaning Specialist and the President of MSS Cleaning out of Denver, Colorado. With over five years of cleaning experience, he specializes in carpet cleaning, stretching, and repairs as well as upholstery cleaning, water damage restoration, and tile and grout cleaning. Andrew holds a BA in Psychology and Business Administration from The University of New Hampshire and an MBA in Corporate Finance from The University of Denver.It's best to call a professional to either deep-clean or replace your carpet padding. Unfortunately, pet urine typically soaks deeper into the pad than a standard carpet cleaner can reach.
-
QuestionWhy won't the water suck up into the return tank?Community AnswerIt could be clogged. If you're comfortable doing this, try taking everything apart and cleaning it out. Then try again; if clogging is the problem, then it will start sucking up debris into the tank again. If not, take it to a repairer for help.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- It’s recommended that you clean your carpets at least 2 times a year. Clean areas with deep stains and heavy traffic more often.Thanks
- Using formula products not made by Bissell can void your cleaner’s warranty.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
- Carpet cleaner
- Hot water
- Carpet shampoo
- Carpet cleaning formula
- Electrical outlet
References
- ↑ Andrew Rohr. Carpet Cleaning Specialist. Expert Interview. 15 April 2021.
- ↑ https://www.bissellrental.com/cleaning_tips/How-to-Deep-Clean
- ↑ https://www.bissell.com/support/helpful-resources/cleaning-tips/carpet-cleaning/no-clean-like-deep-clean
- ↑ https://www.bissell.com/carpet-cleaners/carpet-cleaning-the-best-way-to-deep-clean.html
- ↑ https://www.bissellrental.com/cleaning_tips/How-to-Deep-Clean
- ↑ Andrew Rohr. Carpet Cleaning Specialist. Expert Interview. 15 April 2021.
- ↑ https://youtu.be/7tuNaJjAQUk?t=195
- ↑ https://youtu.be/JBuzaEUsxsc?t=103
- ↑ https://www.bissell.com/support/helpful-resources/cleaning-tips/carpet-cleaning/no-clean-like-deep-clean
- ↑ Andrew Rohr. Carpet Cleaning Specialist. Expert Interview. 15 April 2021.
- ↑ https://www.bissell.com/support/helpful-resources/cleaning-tips/carpet-cleaning/no-clean-like-deep-clean
- ↑ https://www.bissellrental.com/cleaning_tips/How-to-Deep-Clean
- ↑ https://www.consumerreports.org/appliances/carpet-cleaners/buying-guide/
- ↑ https://youtu.be/JBuzaEUsxsc?t=103
- ↑ https://www.bissell.com/carpet-cleaners/carpet-cleaning-the-best-way-to-deep-clean.html
- ↑ Andrew Rohr. Carpet Cleaning Specialist. Expert Interview. 15 April 2021.
About This Article
Article Summary
X
To use a Bissell carpet cleaner, start by filling the cleaner’s tank with hot water and cleaning formula. Then, if your machine has a cleaning dial, set it to light, normal, or heavy, depending on the dirtiness of your carpet. Next, turn the dial to the floor cleaning option, and press the power and heater buttons. As you clean, pull the trigger to spray the carpet, then let go of the trigger and pull the cleaner back to suction up the dirt and water. For tips on how to clean tough stains and hard to reach areas, scroll down.
Did this summary help you?
Thanks to all authors for creating a page that has been read 441,724 times.
Advertisement
"An easy explanatory, practical thank you."
