The Best Way to Use a Screw Extractor

PDF download Download Article
Remove a screw with ease using this simple guide
PDF download Download Article

If you need to remove a broken screw or bolt, a screw extractor is the perfect tool to use. Screw extractors have reverse threads that grip onto the screw so you’re able to turn them and take them out more easily. We interviewed professional handymen to put together our helpful guide, so keep reading and we’ll walk you through using a screw extractor from start to finish.

Things You Should Know

  • Put on a pair of safety glasses . Tap the middle of the screw with a center punch to make an indent.
  • Use a drill bit narrower than the screw to make a shallow hole in the head.
  • Turn the screw extractor counterclockwise into the hole to loosen and remove the screw.
1

Put on safety glasses.

PDF download Download Article
  1. Using a screw extractor requires drilling into the metal, which can create sharp metal shavings or even break the tool. [1]

    Wear a pair of thick safety glasses made with polycarbonate lenses to protect your eyes while you work. [2]
    2. Advertisement
2

Tap the screw head with a center punch.

PDF download Download Article
  1. A center punch is a cylindrical piece of metal with a pointed end. Align the tip with the center of the screw head. Then, just tap the other end of the punch with a hammer to make a small indent. [3]

    The indent will help prevent the drill bit or extractor from slipping away from the center of the screw.
3

Drill out the center of the screw.

PDF download Download Article
  1. Choose a drill bit that’s slightly narrower than the screw head and attach it to your drill . Barry Zakar, a handyman, says that, “the screw extractor instructions will tell you what size bit to use for a given screw.” [4]

    Then, place the drill bit in the divot on the center of the screw. Apply downward pressure so you drill straight down into the screw head by about 1 ⁄ 8 – 1 ⁄ 4 inch (0.32–0.64 cm).

    Instead of a separate bit, some screw extractors fit into your drill and have ends made to cut through the metal. Ryaan Tuttle, a handyman, notes, “you're going to use one end to the extractor bit and screw into the screw head and make it look like a little divot.” [5]

    Pro Tip: Apply cutting oil to the screw to lubricate the metal so you spend less time drilling and create less wear and tear for your drill bit.
    2. Advertisement
4

Turn the screw extractor counterclockwise.

PDF download Download Article
  1. Place the pointed threaded end of the screw extractor into the hole you just drilled.

    If your extractor came with a tap handle, attach it to the end of the extractor and turn it counterclockwise by hand. Alternatively, grip the extractor with a wrench to turn it.

    If your extractor is made to fit into a drill, Handyman Ryaan Tuttle says, “flip the extractor bit around and drill in reverse.” [6]

    Keep twisting the extractor counterclockwise until you completely remove the screw. [7]
5

Apply penetrating oil for stubborn screws.

PDF download Download Article
  1. Penetrating oil loosens the screw, making it easier to remove. Add a drop of the oil onto the screw head and around the threads to help make the extractor work better. [8]

    If the screw is attached to non-flammable materials such as metal, try heating it with a torch to expand the metal and make it easier to pull out.
    2. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can you use this procedure if screw is just rusted into metal shower door frame?
    Community Answer
    Yes, use penetrating first. Penetrating oil loosens the rust. Then you should be able to drill the screw.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 10
  • Question
    The meager instructions included with my Yamo screw extractor kit imply that I first drill a hole using the drill bit, but drill counter clockwise. Is this correct?
    Community Answer
    There are two kinds of extractors. 1. Self drilling extractors that you simply use on the screw in a reverse direction and it will drill + extract. 2. (The kind you have) where you drill a hole, normally as you would, and then you extract with the extractor in a reverse direction so that it pulls the screw out.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 16 Helpful 27
  • Question
    How do I extract the threaded remnant of a screw that broke inside something?
    Community Answer
    You could epoxy a small rod or weld it on and twist it out. But depending on what material you're working with, it could be tricky.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 20 Helpful 4
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Avoid using a screw extractor on screws or bolts longer than 2 inches (5.1 cm) because they could damage the tool. [9]
        Thanks
        Helpful 0 Not Helpful 2
      Advertisement

      You Might Also Like

      10 Different Ways to Get a Stripped Screw Out
      How to
      Use a Tap
      10 Ways to Remove a Stuck Screw
      How to
      Remove a Stripped Allen Screw
      How to
      Measure Screw Size
      How to
      Unscrew a Screw Without a Screwdriver
      How to
      Remove a Screw without a Head
      How to
      Use a Rawlplug
      How to
      Fix a Loose Screw That Won’t Tighten in Wood
      How to
      Read a Screw Thread Callout
      How to
      Replace a Ceiling Fan Pull Chain Switch
      How to
      Put Anchor Screws in a Wall
      How to
      Remove One Way Screws
      How to
      Remove a Rounded Nut or Bolt
      Advertisement

      References

      1. ↑ https://www.bobvila.com/articles/how-to-use-a-screw-extractor/
      2. ↑ https://www.coopersofstortford.co.uk/images/pdf/st11128i.pdf
      3. ↑ https://www.bobvila.com/articles/how-to-use-a-screw-extractor/
      4. ↑ Barry Zakar. Handyman. Expert Interview. 16 July 2020.
      5. ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 18 June 2021.
      6. ↑ Ryaan Tuttle. Home Improvement Specialist. Expert Interview. 18 June 2021.
      7. ↑ https://www.coopersofstortford.co.uk/images/pdf/st11128i.pdf
      8. ↑ https://www.gfii.ca/images/Ezy_Out_Screw_Extractor.pdf
      9. ↑ https://www.coopersofstortford.co.uk/images/pdf/st11128i.pdf

      About This Article

      Article Summary X

      To use a screw extractor, first align a center punch over your screw and hammer the punch to make an indentation to guide your drill bit. Then, attach a drill bit that’s slightly smaller than your screw to your drill. Next, put the drill bit in the indentation you made and drill ⅛ to ¼ of an inch into the screw head. When you’ve drilled a hole big enough for your screw extractor, put the spiral end of your extractor in the hole and twist it counterclockwise until it won’t go any farther. Finally, continue twisting it with a wrench until your screw pops loose. To learn how to use thread cutting oil or penetrating oil to make using your screw extractor easier, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 703,160 times.

      Reader Success Stories

      • John Hagenbrock

        Mar 13, 2017

        "The Irwin brand extractor did not come with any instructions or guidance. This article was all I had to go off of. ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement