Easy Steps for Using a Socket Wrench (AKA Ratchet)

PDF download Download Article
Tighten and loosen nuts & bolts with this versatile tool
PDF download Download Article

Are you tired of refitting a standard wrench on a nut or bolt every time you finish turning it? If you want something quicker and easier to use, a socket wrench (ratchet) is the perfect addition to your toolbox. Socket wrenches have so many uses around the house for home and automotive repairs—if it has a nut or bolt, it’s time to use one. Since they only move in one direction, you don’t have to reposition your socket wrench after each turn and repairs go by so much faster. If it’s your first time with a ratchet, keep reading and we’ll walk you through exactly how it works!

Things You Should Know

  • Choose a socket that’s the same size as the nut or bolt. Push the socket onto the square end of the wrench so it clicks into place.
  • Set the wrench’s lever to set the ratchet direction. Put it to the left if you’re tightening the fastener or to the right if you’re loosening it.
  • Fit the socket over the nut and turn the handle clockwise to tighten or counterclockwise to loosen the fastener.
  • ​​Keep the socket on the nut or bolt, and move the wrench handle back to the starting position. It will not move the fastener.
1

Pick a wrench based on the fastener size.

PDF download Download Article
  1. 3 ⁄ 8  in (0.95 cm) wrench has the widest range of sockets and works for most standard sizes of nuts and bolts. If you need a smaller socket for more precision, like if you need to tighten a vehicle drive belt , opt for a 1 ⁄ 4  in (0.64 cm) wrench instead. For large fasteners on heavy machinery, use a 1 ⁄ 2  in (1.3 cm) wrench . [1]
    • The wrench size is determined by the size of the “drive,” which is the square-shaped knob at the end. The drive size is also the smallest socket that will fit onto the wrench. [2]
    • If you need to tighten lug nuts on a vehicle, use a torque wrench instead so you don’t overtighten them.
    2. Advertisement
2

Choose a socket matching the nut or bolt size.

PDF download Download Article
  1. If you already know the size of the nut or bolt you need to remove, then just choose the socket that’s exactly the same size. Otherwise, try fitting a socket onto the nut. If the socket completely covers the nut and doesn’t wiggle around, then you have the correct size. [3]
    • Use a deeper socket if the nut or bolt is in a hard-to-reach spot. Otherwise, a shallow socket will work just fine.
    • Ratchets come with multiple sockets either in standard (SAE) or metric sizes. If you don’t have the right size, get another socket set that has a wider range.
3

Push the socket onto the end of the wrench.

PDF download Download Article
  1. Line up the square hole on the back of the socket with the drive on the end of the wrench. Push the socket onto the wrench until you hear it click and lock into place. [4]
    • If you’re trying to access a nut or bolt that’s difficult to reach, put a socket wrench extension on first. Then attach the socket to the extension.
    2. Advertisement
4

Flip the wrench’s lever to choose the turning direction.

PDF download Download Article
  1. Look for a lever or knob near where you attached the socket. If you need to tighten the nut or bolt, set the lever or knob to the left side. If you need to loosen the fastener instead, set the lever to the right. [5]
    • Socket wrenches have a ratcheting mechanism inside the drive that only allows the socket to turn in one direction. If you try turning it in the other direction, it will stay in place so it doesn’t re-tighten or re-loosen the fastener.
    • Test the wrench’s turning direction by holding onto the socket with one hand. Try to spin the handle in each direction. If the handle moves clockwise, then it’s set to tighten. If it moves counter-clockwise, then it’s set to loosen.
5

Turn the wrench to tighten or loosen the fastener.

PDF download Download Article
  1. Slide the socket onto the nut or bolt. Turn the handle as far as you can to either tighten or loosen the nut. When you can’t move the handle any further, leave the socket on the fastener and move the handle back to where it started. Keep turning the handle until the fastener is completely tight or loose enough to remove. [6]
    • The wrench handle will click when you return it to the starting position, but that’s normal. The ratcheting mechanism inside is moving so you don’t turn the nut or bolt in the wrong direction.
    • Since you don’t need to lift and reposition it each time, a socket wrench allows you to tighten or loosen nuts and bolts faster than a standard wrench.
    2. Advertisement
6

Remove the socket by pressing the wrench’s button.

PDF download Download Article
  1. Press the large button down on the back of the wrench and gently pull the socket straight down. Put the socket back in its container so it doesn’t get lost or damaged. [7]

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Use a Manual Can Opener
      How to
      Read a Multimeter
      How to
      Remove a Drill Bit
      How to
      Change a Dremel Bit
      How to
      Set Up an Oxy Acetylene Torch
      How to
      Tell Wood and Metal Drill Bits Apart
      2 Ways to Fill and Prime a Grease Gun
      How to
      Use a Level
      How to
      Use an Air Compressor
      How to
      Find the Weight of an Object Without a Scale
      How to
      Make a Vacuum Pump
      How to
      Mount a Pegboard
      How to
      Read a Torque Wrench
      How to
      Make a Stone Axe
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car maintenance and repair, check out our in-depth interview with Michael Dey .

      References

      1. ↑ https://youtu.be/HJEU0OKA3EM?t=43
      2. ↑ https://krankengineering.com/wp-content/uploads/2017/04/Wrenches.pdf
      3. ↑ https://youtu.be/s9XkCs8N1Z8?t=41
      4. ↑ https://youtu.be/Xh0uZCneXso?t=9
      5. ↑ https://youtu.be/l5tb6rRRP3Q?t=117
      6. ↑ https://www.artofmanliness.com/lifestyle/gear/toolmanship-your-complete-guide-to-wrenches/
      7. ↑ https://youtu.be/Xh0uZCneXso?t=26
      8. ↑ https://youtu.be/l5tb6rRRP3Q?t=556

      About This Article

      Thanks to all authors for creating a page that has been read 69,617 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement