How to Adjust or Dial in a Rifle Scope

PDF download Download Article
PDF download Download Article

Learning to properly mount, sight and adjust a rifle scope will result in accurate shots and saved ammunition. If you want to learn how to do it yourself, you can learn to install and adjust your scope safely and efficiently.

Part 1
Part 1 of 3:

Installing the Scope

PDF download Download Article
  1. Start with a good quality base mount and mounting rings to ensure that your scope will be held sturdy for years to come. It's often better to spend a little more on the mount than on the scope itself, so you won't have to continually adjust things when you've got it sighted in. [1]
    • To install the mount, you'll tighten the screws into the mounts according to the manufacturer directions. It's best to proceed in an X pattern, so that you are not pulling the scope one way or the other. Start the screws loosely at first, so you can make adjustments if necessary.
  2. Lay the scope into the bracket, according to the manufacturer's directions, with the eyepiece oriented in the correct direction. Use a small torpedo level, laying it on the top of your scope to check for level, and tightening the rings firmly. [2]
  3. Set the distance to your shooting eye so the position is correct when in your shooting position. Your image should be sharp and clear when you look through the eyepiece, when this is achieved your know you are in the correct place.
  4. Your rifle should be held in a steady position, mounted on a stand so that the rifle stock is level and square to the ground level. Start rotating the cross-hair so that the vertical cross-hair is at top dead center, or 12 o'clock. [3]
    • Imagine a line through the cross-hair that runs directly through the center of your rifle. You can make further adjustments later, but it's important to get the cross-hairs oriented in the correct position now, before you tighten it down.
  5. Make sure that the cross-hair remains top dead center, then gradually tighten your mounting rings. Tighten each screw only half a thread at a time constantly checking the cross-hair hasn't moved. Go slowly.
Part 2
Part 2 of 3:

Setting Your Zero

PDF download Download Article
  1. The only way to accurately sight-in a rifle scope is to shoot it from a variety of positions. The easiest way to do this is at the gun range, typically, where you can be sure of the distances and your backstops. As always, practice good gun safety while you're handling a firearm and bring eye protection and ear protection, as well as enough ammunition for a day of shooting. [4]
    • Use a bulls-eye target specifically for zeroing. These will typically have lots of measurements that will let you make accurate adjustments on the rifle. The more sure how "off" each hit is, the more accurately you'll be able to sight it in.
    • Follow the specific regulations and rules at the range at which you're shooting.
  2. When you're zeroing a rifle, you need to eliminate user-error from the equation as much as possible. In other words, you can't miss. To give yourself the most accurate zero, you need to mount your gun into a rest specifically for this purpose, which are available at all sporting goods outlets, and may be available at a gun club near you, which you can borrow. All the more reason to head to the range. [5]
    • If you don't have a solid gun rest, get in as solid a position for shooting as possible. Even just setting up a couple of steady books, or your boots, or your jacket, will help you to rest the gun on something and shoot more accurately. Just make sure whatever you're resting it on is clear of the bolt.
  3. Wait for the signal that the range is hot, and look through your scope, training the sight on the bulls-eye. Using a proper stock to cheek weld and maintain the same sight picture as you usually do. Take the safety off the rifle. At the end of your exhale, hold for a split-second, then squeeze the trigger firmly without jerking it for the most accurate shot. Repeat 3-5 times for the most accurate first run. [6]
  4. Wait for the signal that the range is cold, then safety and unload your rifle, checking it twice to be sure. Retrieve your target, or examine it through a range sight to get an accurate picture of your shots. [7]
  5. Return to your rifle, and make adjustments using the adjustment knobs on the top and one side of the scope. Each scope will have a slightly different mechanism for making adjustments, but the principles are basically the same. For specific instructions about adjusting the zero, read the next section. [8]
    • Once you've made your adjustments, repeat this process. Fire a few more rounds, check the grouping, and readjust. That's the process.
    • It's a good idea to mark the holes in the target that you've already made, so you don't get confused later, or to use a new target. Some targets come with four or five different bullseye, just for this process.
  6. Generally speaking, most marksmen will want to sight-in the rifle from a variety of different positions, focusing most on the distances at which you'll be likely to fire. The same basic process and adjustments can be made at each position, but you'll probably want to measure from at least two, and probably more like three or four distances. [9]
    • Start at 20 yards (18.3 m), then move out to about 75. Try not to move more than 50 yards (45.7 m) at a time, to keep yourself making little adjustments. If you have time and feel like you could still make more adjustments, you can move into the 200–300 yard (180–270 m) range and get ambitious. At that point, however, wind will be a big factor. [10]
Part 3
Part 3 of 3:

Making Adjustments

PDF download Download Article
  1. Most scopes should have two dials on it, one on the top and one on the side, which are used to adjust the scope and will allow you to zero it, so what you're seeing and where the rifle is aimed will be in line. The top knob is used to adjust the up and down of the cross-hairs, and the one on the side will adjust the scope left to right. [11]
    • On some older sights, you'll need to use a penny or a small key to turn the knobs gently, though on most sights you can just use your fingers to twist the knob, like a dial.
  2. If you missed high, adjust the scope to go higher. If you missed left, adjust the scope toward the left. Continue making the necessary adjustments until your secured and steady rifle is hitting bull's eye regularly, then move elsewhere on the range to try from another distance.
  3. On most scopes, each click you turn either dial that moves the zero 1/4", so four clicks of the knob would be about an inch. Read the user manual that came with your scope to be sure about adjustments, but always move little.
  4. If you have access to a laser bore sighter that will save you a lot of ammo and less wear on the shoulder. If not, take your rifle it to your local sporting goods dealer and have them bore sight it. It's a very inexpensive process that will result in a pretty accurate rifle.
    • Once the gun has been bore sighted and is ready to shoot you should still test it yourself using these directions and make the necessary adjustments. Some difference will come from different user variables.

Expert Q&A

Search
Add New Question
  • Question
    What is the best way to use a rifle scope?
    Dr. Jeffrey S. Harmon
    Firearms Instructor
    Dr. Jeffrey S. Harmon is a Firearms Instructor based in Southern New Jersey. He is the Owner and Chief Operating Officer of Ironsights Academy, a firearms education & training organization that he launched to continue his love of teaching and learning. Dr. Harmon is a higher education educator with over 20 years of experience who blended his passion for teaching with shooting sports as he launched Ironsights Academy: Firearms Education & Training. Dr. Harmon is an NRA Certified Instructor in Pistol, Rifle, Shotgun, Personal Protection Inside & Outside the Home, Concealed Carry Weapons, Defensive Pistol, and a certified Chief Range Safety Officer. Dr. Harmon is also certified by the American College of Surgeons to teach Stop the Bleed courses.
    Dr. Jeffrey S. Harmon
    Firearms Instructor
    Expert Answer
    Magnification and cost of scope vary greatly. So, depending on whether you're shooting 50, 100, or 1000 yards, you may need a different type of scope, but once you're sighted in and that scope is sited in for the correct distance, using a scope is fairly easy and intuitive. Most have a simple crosshair. Some have more advanced radicals where they have what we call bullet drop compensators, different hash marks on the scope reticle for different distances that allow you transition between close and far distances relatively easily.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 3
  • Question
    How do I get rid of a black circle inside the eye piece?
    Community Answer
    Move the scope closer to your eye. This will increase your field of vision and eliminate the black ring you see inside the scope eyepiece.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 35
  • Question
    Do the left buttons make it go up and down? Also, what do the knobs do?
    Community Answer
    Refer to your user manual for the specifics of any particular scope. If the knobs click, they probably adjust the reticule. If not, they could adjust magnification. Or, it could be a rheostat if your scope is illuminated.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 13
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      You Might Also Like

      How to
      Use Adjustable Objective Rifle Scopes
      How to
      Sight In a Rifle
      How to
      Use a Rifle Scope
      How to
      Calculate Distances With a Mil Dot Rifle Scope
      How to
      Accurately Aim a Rifle
      How to
      Disassemble an Ak 47
      How to
      Measure the Length of Your Pull for a Rifle
      How to
      Use a Bolt Action Rifle
      How to
      Bed a Rifle Stock
      How to
      Zero a Rifle
      How to
      Snipe or Be a Marksman With a Rifle
      How to
      Shoot an Assault Rifle
      How to
      Fire a Rifle
      How to
      Adjust Hop Up on an Airsoft Rifle

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about firearm safety, check out our in-depth interview with Dr. Jeffrey S. Harmon .

      References

      1. ↑ https://www.youtube.com/watch?v=8rFOtmWqBUI
      2. ↑ https://www.youtube.com/watch?v=8rFOtmWqBUI
      3. ↑ https://www.youtube.com/watch?v=8rFOtmWqBUI
      4. ↑ https://www.youtube.com/watch?v=8rFOtmWqBUI
      5. ↑ http://thecmp.org/wp-content/uploads/Gary_OTMFall2011.pdf
      6. ↑ http://thearmsguide.com/7150/long-range-shooting-how-to-zero-your-scope/
      7. ↑ https://www.armystudyguide.com/content/army_board_study_guide_topics/m16a2/zero-and-m16a2-rifle.shtml
      8. ↑ https://www.armystudyguide.com/content/army_board_study_guide_topics/m16a2/zero-and-m16a2-rifle.shtml
      9. ↑ http://thecmp.org/wp-content/uploads/Gary_OTMFall2011.pdf
      1. ↑ http://www.armystudyguide.com/content/army_board_study_guide_topics/m16a2/zero-and-m16a2-rifle.shtml
      2. ↑ http://thecmp.org/wp-content/uploads/Gary_OTMFall2011.pdf
      3. Videos provided by MidwayUSA

      About This Article

      Article Summary X

      To zero your rifle scope, head to your local gun range and mount your rifle in a rest. When the range is clear and it's safe to shoot, take 3-5 shots at the bull’s eye. After you’ve taken your shots, examine your shot grouping through the scope. Or, wait until the range is cold and take the target down. Once you know where your shots are missing the target, make adjustments with the dials on your scope. For example, if your shots are all mostly high, adjust the scope a little higher to account for that. Use the top dial to make vertical adjustments and the side dial for horizontal adjustments. Make very small adjustments at a time, since a click usually moves the scope about ¼ inch. For more tips, including how to install your scope onto your rifle, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 704,768 times.

      Reader Success Stories

      • Gordon Nicholas

        Dec 30, 2016

        "As a novice in setting up and sighting a rifle, I found this to be the best covered and user friendly advice on the ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?