How to Adjust a Compound Bow

PDF download Download Article
PDF download Download Article

Archery is a unique activity that has been practiced as both a sport and skill of hunting and warfare for thousands of years. Advances in technology in recent years have led to the design and creation of bows that can shoot great distances with astounding accuracy. Because of the incredible balance, technique and precision that goes into shooting a bow, it is essential that the bow itself be tuned to meet the specific attributes of the archer wielding it. Adjusting the firing mechanisms of a modern compound bow is as simple as a few turns of a wrench and getting a feel for the exact weight you need.

Things You Should Know

  • Change the draw weight by loosening your bow’s limb locking screws and tightening or loosening the limb bolts to your desired weight.
  • Adjust to a draw weight that is comfortable, matching both your upper body strength and your draw length.
  • Draw and hold the bow for several seconds to get an idea of how it needs to be adjusted; you can also use average draw weights for reference.
Part 1
Part 1 of 3:

Changing the Draw Weight

PDF download Download Article
  1. Look for the limb bolts near the center of your compound bow. The limb bolts lie in large circular knobs that attach the bow’s arms to the riser. These bolts must be manipulated to tweak the draw weight, or the amount of tension that is placed on the bow string as it is pulled. [1]
    • The riser is the central part of the bow that connects to the limbs and other mechanical components.
  2. Certain compound bow models use a second set of bolts or screws to hold the limb bolts in place once they’re in the right position. These can usually be found on either side of the limb bolts. They can sometimes be undone with the same Allen wrench you’ll use to adjust the limb bolts, or they may require a separate screwdriver. Loosen the locking screws to allow the limb bolts to be adjusted.
    Advertisement
  3. Insert the short arm of an Allen wrench (most commonly a 3/16 size, usually included with the bow) into the bolt and make sure it is properly slotted. Then, turn the wrench either clockwise to tighten the bolt or counterclockwise to loosen it. Adjust the tension of each arm of the bow to the preferred weight. Do this for both limb bolts, turning each bolt the same amount. [2]
    • Tighten or loosen the limb bolts one full rotation at a time. This will help you keep track of the level of tension in each of the limbs. [3]
    • On most compound bows, one rotation of the limb bolt translates to roughly a pound and a half of weight.
    • Remember to adjust the tension equally on both limbs.
  4. Secure the limb locking screws if your bow has them. Hold the bow as you ordinarily would and pull back the bowstring to test the draw weight. If you’re satisfied with how it feels, you’re done. If not, continue tinkering with the draw weight until you get it how you want it. [4]
    • You should be able to draw the bow in one smooth, controlled motion.
    5. Advertisement
Part 2
Part 2 of 3:

Finding the Right Draw Weight

PDF download Download Article
  1. The draw weight of the bow should be determined by your level of upper body strength. If the draw feels too heavy, or it becomes difficult to continue drawing the bow after multiple shots, the tension may be too high. An excessively heavy draw weight can wear you out and throw off your shot. [5]
    • Light draw weights are more manageable, but sacrifice force and velocity when propelling the arrow. [6]
    • A heavier draw weight doesn’t always equal a better shot. The force and trajectory can depend just as much on the type of arrow you’re using.
  2. Draw length refers to the distance it takes to pull the bowstring all the way back. The longer the draw length, the more tension that is placed on the bow and the heavier the weight of the bowstring. Make sure your bow is properly calibrated to suit your body type and measurements. If need be, take the bow to a specialist to have it modified.
    • The draw length of the bow should correspond directly to your arm span.
    • Altering the bow’s draw length is more complicated, and may have to be done by a professional.
  3. Are you taking your bow hunting, using it for a sport competition or just practicing recreationally? Hunters may favor a heavier pull to ensure that their arrows have penetrating power. Competition archers, on the other hand, should aim to use a weight that lets them shoot over and over again without causing fatigue.
    • Competition archers shoot more frequently and might get tired using a heavier draw weight.
    • Bows with different specifications and mechanical advantages are made for different kinds of sportsmen.
  4. Above all, the draw weight you decide on should feel natural in your hands. Don’t let your ego tempt you into using too heavy a bow or specifications that don’t fit your individual style. Adjust your bow until it is balanced enough to draw, hold and release without difficulty. [7]
    • Always go with what feels best. It may take a little time to figure out, but in the end your bow will be better calibrated to your unique proportions, and you’ll be more accurate as a result.
    5. Advertisement
Part 3
Part 3 of 3:

Adjusting the Bow to Suit Your Needs

PDF download Download Article
  1. If you’re just getting started and aren’t sure what draw weight would be best for you, take a look at some average draw weights as they’re categorized by age and sex. Children generally start with a weight of around 20-30lbs; women weighing less than 170lbs and older boys fall around 30-40lbs; women weighing over about 170lbs, older boys, and men weighing 150lbs or less might use a weight anywhere between 45-65 lbs; men between 150-200lbs use an average of 60-70lbs; men over 200lbs might use up to a 100 pound draw weight. [8]
    • Try out different bow sizes and draw weights to see which you handle best.
    • These are just average figures, and don’t reflect the abilities of an individual archer.
  2. Draw back the bowstring just short of full extension and hold it for about ten seconds. If you begin straining or fail to keep the bow drawn, decrease the tension a little by loosening the limb bolts one rotation at a time. You should be able to hold the bowstring taut in the position just before the wall for a few moments without a struggle. [9]
    • The point at which the bowstring can’t be pulled back any further is known as the “wall.” The wall of a draw is calculated to help you find the perfect amount of tension to take a shot. [10]
    • Drawing and holding is a practical exercise, as you’ll be holding the draw to aim when shooting for real.
  3. Some archers use this method to test how comfortable they are with their bow’s draw weight. Sit in a chair and raise the bow in front of you as if you were sighting a target. Now, pick your feet up off the ground and hold them up as you pull back the bowstring. Observe how easy or difficult this feels. Keeping your feet off the floor reduces your stability and shows you more clearly how much you’re relying on the muscles of your shoulders and back to draw. [11]
    • This test slightly overestimates the role of the upper body in drawing, holding and shooting, giving you more control when your feet are on the ground.
  4. As you pull back the bowstring, make a note of at what point you encounter the most resistance. The bow will normally have the highest amount of tension right before you reach the wall. If it starts getting hard in the middle of the draw or sooner, the limb bolts may need to be loosed just slightly. Similarly, if the draw feels too fast or easy, tightening the limb bolts will result in a more forceful release.
    • Your draw should be one fluid movement, and the bowstring should not slow down at any point during the pull.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can I add a peep sight on a compound bow?
    Clay Hayes
    Archery Expert
    Clay Hayes is an Archery Expert based in Idaho. He owns and operates the website Twisted Stave, where he sells merchandise, offers tutorials, and blogs about his life as an outdoorsman. Clay and his family have built an online community of over 440 thousand archery and hunting enthusiasts with their YouTube channel. Clay has authored three books and produced hundreds of videos on wilderness skills, traditional archery, bow building, and bow hunting. He received a Bachelor’s degree in Natural Resource Conservation from the University of Florida and a Master’s degree in Wildlife Ecology from Mississippi State University.
    Clay Hayes
    Archery Expert
    Expert Answer
    Definitely! To add a peep sight to a compound bow, first determine the appropriate position on the bowstring, typically between 10 and 18 inches above the nocking point. Adjust the nocking point accordingly. Choose a peep sight of the right size and securely attach it to the bowstring after unstringing the bow with a bow press. Align the peep sight with your sight housing, make the necessary adjustments, restring the bow, and verify the alignment at full draw. Test and fine-tune as needed for optimal accuracy.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    How do I properly grip a compound bow?
    Clay Hayes
    Archery Expert
    Clay Hayes is an Archery Expert based in Idaho. He owns and operates the website Twisted Stave, where he sells merchandise, offers tutorials, and blogs about his life as an outdoorsman. Clay and his family have built an online community of over 440 thousand archery and hunting enthusiasts with their YouTube channel. Clay has authored three books and produced hundreds of videos on wilderness skills, traditional archery, bow building, and bow hunting. He received a Bachelor’s degree in Natural Resource Conservation from the University of Florida and a Master’s degree in Wildlife Ecology from Mississippi State University.
    Clay Hayes
    Archery Expert
    Expert Answer
    Hold the compound bow with the pressure from the grip centered on the fleshy part at the base of your thumb, where the large fleshy area seamlessly transitions into your palm. Ensure that the pressure travels directly up your arm and through your shoulders, maintaining a straight alignment. Avoid bending your wrist inward, outward, up, or down. The goal is to establish a straight shot from the contact point at the base of your thumb through your arm, elbow, and shoulders. This grip provides optimal structural support, requiring minimal muscle effort to hold the bow at full draw.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • You will likely need to adjust your bow many times as you gain experience. Your preferences and abilities will change and improve the more you shoot.
        Thanks
        Helpful 1 Not Helpful 0
      • Notice how you perform with your bow at a certain level of tension and make adjustments that will enhance your accuracy and speed.
        Thanks
        Helpful 1 Not Helpful 0
      • Every bow will be a little bit different. You might feel most comfortable with a 60lb draw weight on one bow, but shoot better with a 65lb draw on another model.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Be careful not to tighten the limb bolts too much. Doing this could cause the cams (the part of the bow that connects the limbs to the bowstring) or bowstring to break.
        Thanks
        Helpful 5 Not Helpful 0
      • Be sure to secure the locking screws once you’re finished. Failure to do this can cause the limb bolts to disengage and the bow to come apart, which can be very dangerous for the person holding it and anyone else nearby.
        Thanks
        Helpful 2 Not Helpful 0
      • Consult your bow's manual to find out how many times the limb bolts can be safely turned in either direction. If they are tightened or loosened beyond the bow's capacity, it may damage it.
        Thanks
        Helpful 2 Not Helpful 1
      Advertisement

      You Might Also Like

      How to
      Make a Bow and Arrow
      How to
      String a Recurve Bow
      How to
      Shoot an Arrow
      How to
      Aim a Compound Bow
      How to
      Set Up a Recurve Bow
      How to
      Make an Archery Target
      How to
      Hold an Archery Bow
      How to
      Shoot a Recurve Bow
      How to
      Fletch Arrows
      How to
      Install a Peep Sight
      How to
      Test Bow Poundage
      How to
      Make a Recurve Bow
      How to
      Load and Shoot a Modern Crossbow
      How to
      Shoot a Recurve Bow Without Sights Accurately
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about archery, check out our in-depth interview with Clay Hayes .

      References

      1. ↑ https://shootingtime.com/archery/parts-of-a-compound-bow/
      2. ↑ https://shootingtime.com/archery/adjust-draw-weight/
      3. ↑ https://www.youtube.com/watch?v=t-LBILghvz8
      4. ↑ http://hunthacks.com/set-draw-weight-compound-bow/
      5. ↑ http://www.learn-archery.com/proper-draw-weight.html
      6. ↑ http://www.huntersfriend.com/archery-help/target-and-hunting-bow-sizing-adjustment-guide.html
      7. ↑ http://www.huntersfriend.com/archery-help/target-and-hunting-bow-sizing-adjustment-guide.html
      8. ↑ https://shootingtime.com/archery/adjust-draw-weight/
      9. ↑ http://hunthacks.com/set-draw-weight-compound-bow/
      1. ↑ http://www.huntersfriend.com/archery-help/target-and-hunting-bow-sizing-adjustment-guide.html
      2. ↑ https://shootingtime.com/archery/adjust-draw-weight/

      About This Article

      Article Summary X

      If adjusted properly, your compound bow will give you greater accuracy and comfort when taking your shot. You can easily change the draw weight of your bow by loosening or tightening the limb bolts with an Allen wrench. On most bows, you’ll find these near the centre where the arms attach to the riser. You’ll want a draw weight that you can pull and hold for a few seconds without too much strain. On the other hand, having a bow that’s too easy to draw will sacrifice velocity and precision. You should be able to pull the string back with one fluid movement. For more tips, including how to adjust your bow’s draw weight for hunting, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 252,721 times.

      Reader Success Stories

      • Michael Franch

        Jul 24, 2021

        "As a blogger, I always try to explain the details by checking the product manually. After getting the bow delivery, ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement