How to Accurately Aim a Rifle

PDF download Download Article
Master your marksmanship with our helpful guide
PDF download Download Article

Looking to improve your marksmanship (or, your ability to accurately shoot your target)? We can help! Below, you'll find a detailed, expert-backed guide; we'll show you exactly how to improve your aim with a rifle and offer tons of pro tips too. Read on for more.

Things You Should Know

  • Steady the handgrip with your non-firing hand. The rifle's hand guard should rest in the "V" created by your thumb and forefingers
  • Align the bead in the crook to ensure that the rifle is "sighted." Any error in alignment multiplies when the bullet leaves the gun.
  • Pull the trigger as if you were bringing your finger to your fist with a gentle squeeze.
Part 1
Part 1 of 3:

Holding the Rifle Steady

PDF download Download Article
  1. [1] In the Army, soldiers who pass basic marksmanship are expected to hold their rifle steady enough to keep the front sighting post straight even if a hammer falls on the barrel. By mastering these fundamentals of basic steadying technique, you should be able to hold your sights that steady in any position.
    • Practice different positions to find what works best and is most comfortable for you. The seated position, comfortable for some, is uncomfortable for shooters with bad hips.
    • If you're right-handed, your "firing hand" will be your right hand and your "non-firing hand" will be your left hand, and vice versa.
    • However, eye dominance also plays a factor. Generally, with shoulder-fired weapons, you line up on the side of the dominant eye. This is even true for cross-dominant shooters — people who are left or right handed and dominant in the opposite eye.
  2. The rifle's hand guard should rest in the "V" created by your thumb and forefingers. The grip should be light, like a bad handshake, and the wrist should be straight with the fingers curled naturally around the handguard. [2]
    • The non-firing hand should keep the rifle steady as the non-shooting hand in basketball should steady the ball. Most of the support of the rifle should come from your firing hand and your position, but the non-firing hand is for steadiness.
    • Take precaution to always keep this hand clear of the rifle's action and ejected shells.
    Advertisement
  3. Make sure the butt is steadied against your shoulder, not the fleshy part of your armpit beneath it, or on your collarbone.
    • Keeping it firmly in this pocket allows the recoil to be absorbed by your whole body, rather than snapping back into your shoulder, making for a painful and inaccurate shot.
  4. Depending on the kind of rifle you're firing, you'll be gripping either a full pistol grip or a tapered shotgun-style grip. Regardless, your grip on it should be more firm than your non-firing hand, more like a business handshake. There should be some backward pull on the grip, pulling the rifle back firmly into your shoulder. This ensures that, when you're ready to fire, squeezing the trigger won't move the rifle and jostle your accuracy.
    • Your trigger finger should be straight. Do not curl it around the trigger until you're ready to fire. Rest it on the side of the trigger guard, or use it with the other fingers to grip the stock.
  5. Your elbows will be placed somewhat differently depending on whether you're seated, standing, or prone, but all positions require that your elbows stay under the rifle to support its weight. Imagine a string connected your elbows toward your hips, pulling them in toward your center of gravity.
  6. Watermark wikiHow to Aim a Rifle
    This is sometimes called "cheek to stock weld," and can be obtained by bringing your nose to the charging handle on some rifles. Consistent cheek-to-stock weld will ensure that your eye aligns naturally to the sight and that you don't have to use your peripheral vision to strain and aim.
  7. With proper technique, you should be able to relax your body and assume a calm breathing rhythm. Your grip should be firm on the rifle without being tense. If you're using your muscles to hold the rifle, eventually they'll tire and your accuracy will waver. Getting into a comfortable, relaxed position is the best way to shoot accurately.
    8. Advertisement
Part 2
Part 2 of 3:

Shooting with Accuracy

PDF download Download Article
  1. Having oriented yourself in the general direction of the target and relaxed in a steady position, your rifle should be oriented mostly on-target without much more effort on your part. This is called your "natural point of aim" and is a sign of proper technique.
    • If, when you relax your muscles in your steady position and let your cheek weld to the stock, you have to expend effort to twist your body around even slightly to get the sight directly on target, this is a sign you need to reposition yourself. Abandon your position and realign yourself properly.
  2. A basic aperture-sighted rifle (i.e., there's no scope on the rifle) – often called "iron sights" – consists of two parts, a front sight post or "bead" near the tip of the rifle's barrel and an aperture or "crook" about halfway up the barrel. Before you worry about your target, you need to align the bead in the crook to ensure that the rifle is "sighted." Any error here in alignment multiplies exponentially when the bullet leaves the gun. [3]
    • If you've got good cheek-to-stock weld, the sighting post should align in the aperture without much difficulty. Reposition your neck slightly if you need to.
    • If you're using a telescopic sight, the principle will be essentially the same. [4] Make sure that your eye is the proper distance back from the scope, far enough to avoid recoil and aligned properly so there are no "shadows" in the scope's vision.
    • Make sure your scope is properly sighted before firing and that your front sight post is blackened and matte, not reflective. Use gun blacking or pencil lead to blacken.
  3. Align your eye with and focus on the front sight post. When you're trying to balance your elbows on your knees and breathe evenly and keep the stock tight and keep a little bead in a little aperture on a tiny target 50 yards (45.7 m) away, it can get frustrating: What do you even focus on? The short answer is the bead, not the target. Trust that you're in the right position, relax, and focus on the bead.
    • If you're in proper position and you've aligned the sight, your target should be in the aperture, and though it will appear blurry to you, focusing on the bead ensures that you maintain proper sight alignment while firing, resulting in a more accurate shot picture.
  4. A correctly aimed shot has the front sight post, the aperture, the target, and your eye aligned perfectly (or if using a scope, the crosshairs and the target). This is called a "sight picture." Take a second to shift your focus back and forth between the target and your sight, ensuring that everything is aligned.
    • Eventually, the more you practice your aim, you'll be able to do this without changing your focus, which tends to strain the eyes. Practicing cheek-to-stock weld and sight alignment will ensure that your eye doesn't have to work too hard when aiming.
  5. [5] Shooting is a skill of millimeters, and you'll notice how much your breath affects your aim as you train your sights. But it's important to breathe naturally and fully. Holding your breath will cause discomfort and inaccurate shots. In your breathing, learn to notice the moment immediately following an exhale, when you've completely emptied your lungs of air, but before you become uncomfortable and need to take a breath. It's a split-second, but it's the steadiest and most perfect moment to squeeze the trigger.
  6. All of your careful alignment and positioning will be undone if you yank on the trigger like a gear shift. Instead, you want to squeeze the trigger as if you were bringing your finger to your fist, completing the firm business handshake you've got on the grip with a gentle squeeze. [6]
    • Early on, anticipating the report and recoil of the rifle causes many shooters to wobble when pulling the trigger. It's a lot to keep straight at once, but getting comfortable your rifle is the only way to shoot accurately. Take lots of time setting up your shots and learn to relax. That groundwork will pay off.
  7. Just like in basketball or golf, the proper positioning and balance needs to continue all the way through the shot. Jerking your head up to see whether you hit the target is the best way to miss it. Keep your muscles relaxed, your cheek welded to the stock, the butt tight to your shoulder pocket, and keep your eye focused on the front sight post. Take a few breaths and you're ready to either check your shot or fire again.
    8. Advertisement
Part 3
Part 3 of 3:

Developing Accuracy from Any Position

PDF download Download Article
  1. Make a line with your non-firing leg and elbow that points about 25 - 30 degrees to the right of your target. Shoulder the rifle in the crook of your firing shoulder so your natural point of aim falls on your target. Keep the butt high enough in the shoulder so your head stays upright as if you were standing. Use your left hand to bring the rifle up to the target level.
    • The prone position is the most stable of all standard firing positions because the shooter's elbows and the weight of the rifle are supported by the ground. You can also use a bipod, sandbag, or other steadying device in this position.
    • Be careful of your hot shell casings. Since you're prone, hot spent casings can roll against your skin or fall onto your body, but this applies to shooting from any position.
  2. In this position, you'll sit cross-legged, oriented 90 degrees toward to the target. Rest your elbows on each knee to support the rifle stock, keeping your back as straight as possible to improve your accuracy.
    • This position is very comfortable for some shooters, but is effected significantly by breathing. Maintain good breath control when firing in this position.
  3. Keep your non-firing hip pointed at the target. You want to distribute the weight of the rifle over both feet evenly to ensure the most accurate shot, so keep your elbows down, your weight balanced on your hips.
    • Securely support the rifle by forming straight column of support with your body. The rifle should balance comfortably atop your body, requiring only minimal muscle use from you.
  4. Professional shooters use something called a "kneeling roll" to brace the ankle of the firing-side leg, but you can also use a rolled up t-shirt or other brace. Kneel over your brace, keeping your bracing ankle on the firing side straight and the non-firing knee vertical. You can rest the non-firing elbow on your non-firing knee, or use the kneeling position as a modified standing position and keep it up. Either way, keep your elbows and in and down, supporting the weight of the rifle. [7]
    • If you do rest your elbow on your knee, make sure you avoid unstable "bone-to-bone" contact. Instead brace the "meat" of your arm against your knee. Try placing your knee against your left tricep an inch or two above your elbow, then making minor adjustments to find the stablest, most comfortable position for you.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What's the best rifle scope?
    Dr. Jeffrey S. Harmon
    Firearms Instructor
    Dr. Jeffrey S. Harmon is a Firearms Instructor based in Southern New Jersey. He is the Owner and Chief Operating Officer of Ironsights Academy, a firearms education & training organization that he launched to continue his love of teaching and learning. Dr. Harmon is a higher education educator with over 20 years of experience who blended his passion for teaching with shooting sports as he launched Ironsights Academy: Firearms Education & Training. Dr. Harmon is an NRA Certified Instructor in Pistol, Rifle, Shotgun, Personal Protection Inside & Outside the Home, Concealed Carry Weapons, Defensive Pistol, and a certified Chief Range Safety Officer. Dr. Harmon is also certified by the American College of Surgeons to teach Stop the Bleed courses.
    Dr. Jeffrey S. Harmon
    Firearms Instructor
    Expert Answer
    To choose a rifle scope, first assess your typical shooting distances, considering whether you often shoot at 50, 100, or 1000 yards. Factor in the importance of magnification for precision, balancing it with your budget. Ensure the scope is user-friendly once sighted in, with a suitable reticle for your shooting preferences. Investigate durability features, read reviews, and consider brand reputation before making a purchase. If possible, test the scope to ensure it meets your expectations in terms of functionality and clarity.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    How do I zero a rifle with a bore sight cartridge?
    Dr. Jeffrey S. Harmon
    Firearms Instructor
    Dr. Jeffrey S. Harmon is a Firearms Instructor based in Southern New Jersey. He is the Owner and Chief Operating Officer of Ironsights Academy, a firearms education & training organization that he launched to continue his love of teaching and learning. Dr. Harmon is a higher education educator with over 20 years of experience who blended his passion for teaching with shooting sports as he launched Ironsights Academy: Firearms Education & Training. Dr. Harmon is an NRA Certified Instructor in Pistol, Rifle, Shotgun, Personal Protection Inside & Outside the Home, Concealed Carry Weapons, Defensive Pistol, and a certified Chief Range Safety Officer. Dr. Harmon is also certified by the American College of Surgeons to teach Stop the Bleed courses.
    Dr. Jeffrey S. Harmon
    Firearms Instructor
    Expert Answer
    To zero a rifle with a bore sight cartridge, start by ensuring the firearm is unloaded. Insert the bore sight cartridge into the rifle's bore and secure it on a stable surface. Align your sights with the laser dot projected by the bore sight, getting as close to the target as possible without firing. Fine-tune your zero by firing a three-round group, adjusting the scope as needed. Repeat and confirm the zero at different distances for comprehensive accuracy. This method offers an efficient and cost-effective way to align your rifle sights without live ammunition. Always prioritize safety during the process.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    Why do soldiers place the butts of their rifles against their shoulders when firing?
    Community Answer
    It's the proper position for aiming and it stabilizes the recoil.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 27
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Strong winds can also affect aim. Again, this effect increases with distance.
        Thanks
        Helpful 9 Not Helpful 4
      • If your shots are off-target but you are confident that you've done everything correctly, your sights or scope may not be properly aligned. Either adjust them (see: How to Sight in a Rifle ), or if you can't, compensate your aim.
        Thanks
        Helpful 10 Not Helpful 5
      • Compensate for distance. Your gun sights are usually set for a specific distance range optimized for the ammunition the gun is designed to use. Different loads are designed for certain distances. A 22 lr round is not as accurate at 100 yards (91.4 m) as a 7.62x34 is, and that round is not as accurate as a .223 is, etc. Take that into consideration when aiming. What is on target at 50 yards (45.7 m) will not be on target at 100 yards (91.4 m). This deviation increases the farther the target is from the shooter.
        Thanks
        Helpful 4 Not Helpful 1
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Never leave your gun loaded and unattended when you go to retrieve your target. Lock the bolt or cylinder in the "open" position if you have to leave your gun - this way, even if the trigger is pulled, the bullet won't fire.
        Thanks
        Helpful 25 Not Helpful 2
      • Most rifles, particularly semi-automatic weapons, are designed to eject spent casings from the side of a gun. If you are shooting left handed or right handed using a left-handed weapon, make sure the casings will not eject back into your face.
        Thanks
        Helpful 25 Not Helpful 6
      • Never put your eye right up against a scope mounted on a rifle when firing — the resulting kick will damage the orbit , and may, at the least, give you a black eye, and at the worst, hospitalize you.
        Thanks
        Helpful 0 Not Helpful 0
      • Always, always, always handle guns safely. Used carelessly, guns can be fatal. Always assume a gun is loaded, even if you think it isn't. If you're not 100% sure how to handle a gun safely, read our wikiHow article on firearm safety before proceeding.
        Thanks
        Helpful 0 Not Helpful 0
      • Observe safe range practices and rules at all times. [8]
        Thanks
        Helpful 0 Not Helpful 0
      • Always use ear protection and eye protection when using a firearm. [9]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You'll Need

      • A rifle
      • Ammunition
      • Eye protection
      • Ear protection

      You Might Also Like

      How to
      Handle a Firearm Safely
      How to
      Adjust or Dial in a Rifle Scope
      How to
      Use a Rifle Scope
      How to
      Calculate Distances With a Mil Dot Rifle Scope
      How to
      Measure the Length of Your Pull for a Rifle
      How to
      Disassemble an Ak 47
      How to
      Use Adjustable Objective Rifle Scopes
      How to
      Use a Bolt Action Rifle
      How to
      Bed a Rifle Stock
      How to
      Zero a Rifle
      How to
      Snipe or Be a Marksman With a Rifle
      How to
      Shoot an Assault Rifle
      How to
      Fire a Rifle
      How to
      Adjust Hop Up on an Airsoft Rifle
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about using firearms, check out our in-depth interview with Dr. Jeffrey S. Harmon .

      References

      1. ↑ http://www.armystudyguide.com/content/army_board_study_guide_topics/m16a2/four-fundamentals-of-mark.shtml
      2. ↑ https://www.armystudyguide.com/content/army_board_study_guide_topics/m16a2/four-fundamentals-of-mark.shtml
      3. ↑ https://www.artofmanliness.com/articles/how-to-shoot-a-rifle/
      4. ↑ http://www.precisionrifle.net/HOW%20TO%20HOLD%20AND%20SHOOT%20YOUR%20RIFLE.pdf
      5. ↑ http://www.outdoorlife.com/blogs/gun-shots/2012/08/shooting-tips-8-mistakes-rob-rifle-accuracy
      6. ↑ https://www.artofmanliness.com/articles/how-to-shoot-a-rifle/
      7. ↑ https://www.hunter-ed.com/national/studyGuide/Firing-Positions-Kneeling/201099_92891/
      8. ↑ https://www.nssf.org/safety/rules-firearms-safety/
      9. ↑ https://www.nssf.org/safety/rules-firearms-safety/
      1. Videos provided by Kirsten Joy Weiss

      About This Article

      Article Summary X

      To aim a rifle, you’ll need to learn how to hold it steady and align your sight correctly. Check that the sight is aligned with the bead at the end of the rifle so you’re aiming straight when you pick a target. Then, rest the rifle between your thumb and index finger of your non-dominant hand and take hold of the pistol grip firmly with your firing hand to create a steady grip. When you’re ready, look through the sight and focus on the bead, which will help you get an accurate shot. Your goal should be to have your eye, the site, the bead, and the target perfectly aligned. Control your breathing before you fire, since too much movement of your body will disrupt your aim. Finally, gently squeeze the trigger to fire so you don’t disrupt your rifle’s position. For tips on how to follow through after you’ve fired a shot, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 375,165 times.

      Did this article help you?

      Advertisement